Dumfries and Galloway · Scotland

Corrie Common Window Mastic

Mastic around window and door frames, sills and patio doors for homes and businesses in Corrie Common and across Dumfries and Galloway. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Cracked sealant at the sill ends
  • Gaps between the frame and the inside reveal
  • Whistling draughts around closed windows

Trusted window mastic in Corrie Common

About our window mastic in Corrie Common

Around Corrie Common we seal all kinds of frames: uPVC, aluminium, timber and composite, plus patio doors, French doors and sills. Each gets a sealant chosen for the frame and the wall it meets. We’re often asked to deal with white mastic on grey or black frames and cracked internal joints between frame and plaster, on window sills, aluminium frames and uPVC windows.

Mastic can only go onto a dry joint, so outside work in Corrie Common depends on the weather, and longer journeys are planned in advance. Let us know about access to every frame, including any upstairs.

You are covered for a year from the day we finish. If there’s a problem with it, please send an email to info@mrmastic.co.uk.

Applicator reaching up to seal an external door frame on a sunny day
Place
Corrie Common (DG11)
Wider area
Dumfries and Galloway
Guarantee
A year, on every job
Price
A clear quote up front
Email
info@mrmastic.co.uk
Page updated
26 October 2026

FAQs for Corrie Common

Is Corrie Common in your area for window mastic?

Yes, Corrie Common is within the area we cover. We work across all of Scotland. You can send an email to info@mrmastic.co.uk and let us know what needs doing.

Do you work for landlords with property near Lockerbie station?

Yes, rental work is part of what we do. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will give you a clear quote.

Will it make a mess?

Not at all. The area is protected while we work and cleaned up afterwards.

Is the work guaranteed?

Yes. All our work carries a 12-month guarantee, and we are ARBOMaster approved applicators.

What do you need from me for a quote?

Just the basics: where it is, what you’ve noticed and how we reach it. Then drop us a line at info@mrmastic.co.uk.

Can you seal over the old sealant?

No, and we never do. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.

Do you work on first-floor windows?

Yes, where they can be reached safely. Let us know about access when you ask for a quote so we can plan the job.

Can I do it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.

Signs you need window mastic in Corrie Common

Older frames were often sealed with products that set hard. Once it has hardened, the frame’s movement tears it from the wall, leaving a hairline gap down one side.

It’s worth asking for a quote if you see:

  • A bead that does not match the frame
  • Rushed sealant from a window installation
  • Mastic that has split away from the wall
  • Cold air getting in at the frame edge

If you let a flat or house near Lockerbie station, sound mastic around windows and doors keeps out the draughts and damp that tenants notice first.

What to look for in a quote

  • Is VAT in the price?
  • Whether the sealant suits the joint
  • How hidden problems are handled
  • What insurance they hold

How to choose a mastic man

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Avoid blasting the frames with a pressure washer
  • Check the mastic once a year
  • Air rooms to keep condensation down around windows
  • Paint up to the joint, not over it

Check the drainage slots in the frames aren’t blocked, so water can run away instead of sitting against the joint.

Water gets in quietly when mastic fails. You might not see it until plaster blows or a damp patch appears inside. Catching it early keeps the fix to a reseal.

How the visit works

On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a few frames, or a day or more for a whole house from start to finish. Around Corrie Common, distance and access matter more than parking. Tell us how to find the property and how to reach the work.

  1. First, we go round the frames with you and agree the list.
  2. The old mastic is cut out and scraped back to clean surfaces.
  3. Where the gap is deep, backing rod goes in first.
  4. The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
  5. Every joint is tooled smooth and checked before we leave.

How to prepare

  • For business premises, tell us about site rules or sign-in
  • Let us know about earlier repairs to the joints
  • Let us know about stairs, lifts or work at height

Ask for a quote

Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, send an email to info@mrmastic.co.uk.

Get a quick quote

Advice

Landlords, agents and businesses in Corrie Common

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.

When it is not the sealant

We won’t take on work that will not last, so these are the limits:

  • Condensation trapped between the panes
  • Damp problems in the wall away from the window
  • A frame that has rotted at the joint

If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.

Surfaces we seal

  • Patio & French doors
  • Window sills
  • Composite doors
  • Aluminium frames
  • uPVC windows
  • Timber windows & doors

Why it’s worth doing now in Corrie Common

Resealing frames is a short job: the visit takes a morning for a couple of windows and a door. Leave it until water is coming in and you may need plastering and decorating as well. In an older home around Corrie Common, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.

Why us?

  • Experience in homes, commercial sites and hotels
  • More than 20 years in sealant work
  • Arbo and Everbuild products
  • Tidy, careful work

See what affects the cost or what customers say.

What window mastic looks like in Corrie Common

Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Sash and case windows are common in older Scottish homes, often pointed into the wall with traditional sand mastic.

In the older streets around Corrie Church, the joint between an old wall and a newer frame is usually the first place rain gets in.

Corrie Common is about 16 miles north-east of Dumfries, in Dumfries and Galloway. Every kind of property in Corrie Common is covered for window mastic, old or new, large or small. The work is guaranteed for a year. Across Dumfries and Galloway, we cover 138 places, and Corrie Common is one of them. Edinburgh is on our list too, about 54 miles from Corrie Common.

We cover every part of the DG11 postcode area for window mastic. Other places close to Corrie Common include Lockerbie (5 miles south-west), Dogslacks (6 miles south), Middlebie (6 miles south), Ecclefechan (7 miles south) and Halleaths (7 miles west). Further out, we also cover Annan (12 miles south), Moffat (14 miles north-west), Heathhall (14 miles west), Langholm (10 miles east), Gretna (13 miles south-east) and Lochmaben (8 miles west).

Landmarks near Corrie Common

For rail, the closest station is Lockerbie station, about 5 miles south-west.

Map of Corrie Common © OpenStreetMap contributors

Should I try it myself first?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job