East Lothian · Scotland
Remedial sealant & repairs in Tranent, East Lothian
Removing failed, mouldy or leaking sealant and putting it right in Tranent, with a 12-month guarantee on every job. Call for a quick quote.
- Worktop sealant that has shrunk and split
- Products that weren’t meant for the joint
- Smears and lumps from a botched reseal
Remedial sealant in Tranent
Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that is what we find, we will tell you rather than reseal something that will not fix it. We’re often asked to deal with worktop sealant that has shrunk and split and a shower that leaks however often it’s resealed, across failed movement joints, mouldy bath & shower sealant and botched or over-sealed joints.
A bathroom in a place like Tranent gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Every job comes with a 12-month guarantee.
- Where
- Tranent (EH33)
- Wider area
- East Lothian
- Cover
- A year, on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How we quote for remedial sealant
Every job gets its own quote. These are the things that affect it:
- Any working-time requirements on site
- Whether the work is at height
- Mould in or behind the old joints
- The type of sealant required
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
When you call or email, these details help:
- Roughly how big the job is
- Photos by email, if that is easy
- The address or postcode of the job
- What the problem is, such as mould, gaps, leaks or cracking
To get a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.
Remedial sealant in Tranent: local notes
Tranent is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Letting a property close to Prestonpans station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Tranent is about 10 miles east of Edinburgh, in East Lothian. If you need remedial sealant in Tranent, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We are based in Crawley and cover East Lothian, Tranent included. Our East Lothian coverage runs to 48 places, Tranent among them. We also work in Edinburgh, around 10 miles away.
Jobs for remedial sealant in EH33 is quoted and booked the same way as anywhere else. We cover properties on High Street, Balfour's Square and Mcphail Square. Main roads around Tranent include the A199 and B6371, so getting to you is simple. If you’re just outside Tranent, we cover Seton (1 mile north), Elphinstone (1 mile south-west), New Winton (2 miles south-east), Prestonpans (2 miles north-west) and Macmerry (2 miles east). Within a short drive, we also cover Musselburgh (4 miles west), Haddington (6 miles east), North Berwick (12 miles north-east), Longniddry (3 miles north-east), Gullane (8 miles north-east) and East Linton (12 miles east). As one of the bigger places in East Lothian, Tranent has homes, rented property and businesses of every kind.
What’s near Tranent
In Tranent, that means homes and buildings near Keeper's Arms, among other places. The closest station to Tranent is Prestonpans station, roughly 1.2 miles north-west. Other landmarks nearby include Battle of Prestonpans Jacobite Museum (1.8 miles north-west) and Seton Castle (1.8 miles north).
Questions from Tranent
Is Tranent in your area for remedial sealant?
Yes, Tranent is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Is Tranent within the area you cover?
Yes, Tranent is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you work for landlords and businesses?
Yes, regularly. Several properties can go on one quote, and between tenancies is a good time for the work.
Are you insured?
Yes. We are fully insured for every job we do.
Can old silicone be taken off without scratching the tiles?
Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
How the job changes by surface
Leaking trays & enclosures
A cracked tray, failed valve or leaking waste needs a different fix. We say so rather than reseal.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing stops that, so the sealant grips the two sides only.
Also near Tranent
What else we do in Tranent
Looking after it afterwards
So the new joints stay in good condition:
- Get the cause of a repeat leak found before resealing
- Keep the room well ventilated
- Keep movement joints clear of mortar and paint
- Never seal over old silicone
Clean gently: no scraping, scouring pads or harsh chemicals.
Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.
What happens if it’s left?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we’ll tell you. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
What you pay reflects the work, not guesswork. That is why we ask about the job first.
What you get with us
- We agree the colour with you first
- Neat joints and a tidy finish
- 20+ years of sealant experience
- Homes, businesses and hotels
Read what affects the cost or what customers say.
When to call us in Tranent
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks. At that point it has to come out.
The most common problems we see are:
- Black mould underneath the bead
- Over-sealed joints coming away
- Floor or wall movement joints that have failed
- Smears and lumps from a botched reseal
Schools such as Ross High School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Whether VAT is included
- How the colour is chosen
- What guarantee comes with the work
- What happens if they find a problem under the old sealant
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
How it works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a few hours for most joints, depending on how much old sealant has to come out from start to finish. Outdoor work around Tranent depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
Before we arrive
- Move anything stored near the joints
- Tell us about access, such as stairs, a lift or high-level joints
- Mention if the joints have been sealed before
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.