Isle of Wight · England
Remedial sealant & repairs in Shalcombe, Isle of Wight
Failed sealant joints in Shalcombe need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Leaks that keep coming back after resealing
- Products that weren’t meant for the joint
- Wide, uneven beads that look worse than the old ones
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Run the fan after every shower
- Ask why a joint failed before redoing it
- Use a soft cloth, not a scourer, on silicone
- Check ceilings under showers for marks
Keep the room ventilated: use the extractor or open a window after showering.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.
Remedial sealant in Shalcombe
Movement and expansion joints fail when the sealant cannot stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. We work on failed movement joints, expansion joints and leaking tray & enclosure joints, and the jobs we see most are a shower that leaks however often it’s resealed and worktop sealant that has shrunk and split.
Homes around Shalcombe are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
All of our work is guaranteed for twelve months.
- Where
- Shalcombe (PO41)
- Region
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Landlords, agents and businesses in Shalcombe
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Hotels need rooms back in use, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
What we do, step by step
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It generally takes a few hours, depending on how many layers have to come out. In a small place like Shalcombe, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Before we arrive
- Mention any sign-in or site rules at work premises
- Let us know about earlier repairs to the joints
- Mention any tricky access
Ask for a quote
We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or send us an email with the details.
Advice
What we can’t put right
New sealant can’t fix everything, and we’ll tell you before any work starts. It will not solve:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- A cracked shower tray or bath (that needs repair or replacing)
- A bath, tray or worktop that moves until it’s properly fixed
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before booking.
Where we work in Shalcombe
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Shalcombe: your questions answered
Is Shalcombe within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do remedial sealant in Shalcombe?
Yes. We work across London and the South East, and Shalcombe is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels, and we’re fully insured.
Can you take off two layers of silicone?
Yes. We cut out all the layers and clean off the film, then the joint is resealed once.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. Repeat leaks normally come from over-sealing, movement or water getting in elsewhere, and we deal with the cause first.
Does remedial work come with a guarantee?
Yes. Our 12-month guarantee covers the work, and we’re fully insured.
Can old silicone be taken off without scratching the tiles?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Nearby places to Shalcombe
What else we do in Shalcombe
What happens if it’s left?
Another bead over the top won’t fix a failed joint. It cannot bond to what’s underneath, so the leak carries on and there’s now more to remove. Older cottages and farmhouses around Shalcombe can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or email us and we will talk you through it.
Why Shalcombe clients choose us
- Homes, businesses and hotels
- An ARBOMaster approved applicator
- 20+ years of sealant experience
- White, clear, grey or coloured to suit, where the product allows
See our cost guide and customer reviews.
What remedial sealant looks like in Shalcombe
Shalcombe is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Around Shalcombe, as everywhere, remedial sealant is only as good as the preparation behind it. In the older streets around St. Mary's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Shalcombe is about 6 miles west of Newport, in the Isle of Wight. Whether you’re in the middle of Shalcombe or further out, we cover remedial sealant for every kind of property, from flats and houses to offices and hotels. Our area takes in 125 places across the Isle of Wight, large and small. For nearby work, see our Southampton page, about 17 miles away.
Work in PO41 works the same way as everywhere else we cover. We also cover the places around Shalcombe: Dunsbury (1 mile south-west), Hulverstone (1 mile south), Brook (1 mile south-west), Newbridge (1 mile north-east) and Wellow (1 mile north). We also work in nearby towns such as Newport (6 miles east), Ryde (13 miles east), Cowes (8 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles south-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Shalcombe
Nearby you’ll also find Calbourne Water Mill And Rural Museum (1.3 miles north-east) and Yarmouth Castle (3.7 miles north-west). For a walk, there’s Westover Down.
How the job changes by surface
Leaking trays & enclosures
If the tray is cracked, or the leak is from the valve or waste, sealant will not fix it. We say so rather than reseal.
Windows & doors
Failed frame mastic is often hard, cracked and in several layers. All of it is cut out and the frame and wall cleaned before backing and resealing.