Isle of Wight · England
Remedial sealant & repairs in Brook, Isle of Wight
Problem with your failed sealant joints in Brook? We cut out the old, prepare the joints and apply the right sealant.
- A second bead peeling off the first
- Sealant peeling off a dusty or damp surface
- Worktop sealant that has shrunk and split
What we do, step by step
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a few hours for most joints, depending on how much old sealant has to come out in most cases. Somewhere like Brook needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
How to prepare
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
How to get a quote
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Read more
How we handle remedial sealant in Brook
Some sealant jobs aren’t a simple reseal, because someone has already had a go. New sealant over old, smeared beads, unsuitable products and hidden mould all have to come out. We work on failed movement joints, mouldy bath & shower sealant and leaking tray & enclosure joints, and the jobs we see most are sealant that came away because the surface wasn’t prepared and dark patches showing through the sealant.
In a village or hamlet like Brook, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
There’s a 12-month guarantee on every job, large or small.
- Place
- Brook (PO30)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What else we do in Brook
Aftercare tips
After the cure time, these simple habits help:
- Deal with small splits early
- Do not add new sealant on top of old
- Use a soft cloth, not a scourer, on silicone
- Never fill a movement joint with mortar or grout
Give the new sealant its full cure time: normally around 24 hours, or as long as we advise.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into floors, walls or ceilings. Sorting it early limits the damage.
When something else is needed
We’d rather tell you now than do work that won’t last, so these are the limits:
- Movement from fittings that aren’t supported
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracks in the fitting rather than the joint
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Shrunken worktop sealant
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
Remedial sealant in Brook: local notes
Brook is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
In the older streets around St. Mary's Church, walls and floors in older homes can move, and sealant and grout show it first.
Brook is about 7 miles south-west of Newport, in the Isle of Wight. Anywhere in PO30, we cover remedial sealant for homes and businesses. Our the Isle of Wight coverage runs to 125 places, Brook among them. For nearby work, see our Southampton page.
Postcode districts we cover here for remedial sealant: PO30. If you need remedial sealant at a property on Carpenters Lane and Coastguard Lane or anywhere close by, our applicators can take on the job. Close by, we work in Dunsbury (1 mile north), Brookgreen (1 mile south-east), Hulverstone (1 mile east), Shalcombe (1 mile north-east) and Chilton Green (2 miles south-east). Larger places within reach include Newport (7 miles north-east), Ryde (14 miles east), Cowes (10 miles north-east), Sandown (13 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.
Near you in Brook
Other landmarks nearby include Calbourne Water Mill And Rural Museum (2.5 miles north-east) and Yarmouth Castle (4.3 miles north-west). For a walk, there’s Westover Down.
When to call us in Brook
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, so it tears when the joint moves. Backing rod or bond-breaker tape prevents it.
Any of these means the joints need attention:
- A shower that leaks however often it’s resealed
- Sealant applied over old sealant that has lifted
- Sealant that came away because the surface wasn’t prepared
- Smears and lumps from a botched reseal
In and around Brook, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- What guarantee comes with the work
- Whether they’re fully insured
- How the surfaces are prepared before sealing
- How the colour is chosen
Why deal with it now?
Spraying mould remover on a sealed-over joint does not reach what’s underneath. Removal is the only way to get at it. In a small place like Brook, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
Why us?
- We’re fully insured
- Experience in homes, commercial sites and hotels
- White, clear, grey or another colour, product permitting
- Sanitary silicone with an anti-fungal additive in wet areas
See our cost guide or customer reviews.
Brook questions
Will you come out to Brook?
Yes, Brook is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is there a guarantee on remedial sealant in Brook?
All our work, in Brook and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Can you remove sealant that’s been put over old sealant?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What does remedial sealant cost?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before any work starts.
Can you reseal a split movement joint?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
What affects the cost of remedial sealant
You’ll get a clear quote before work begins. It’s based on:
- Whether old sealant or filler has to be cut out
- How many areas need sealing
- The number and length of the joints
- Whether the work is at height
What it costs depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before work begins, so you know where you stand.
Helping us quote
Before you ask for a quote, have a think about:
- The address or postcode of the job
- Pictures of the joints, sent by email
- How many joints, rooms or windows are involved
- If someone has resealed it before
We quote each job on its own. Simply ring 0345 464 0079 or send us an email and describe the job, and photos are welcome.