Hampshire · England
Segensworth Remedial Sealant
Specialist remedial sealant for Segensworth: careful preparation, the right product and tidy work. Call for a quick quote.
- Products that weren’t meant for the joint
- Thick, messy sealant smeared over tiles
- Mould trapped under a layer of silicone
What remedial sealant looks like in Segensworth
Segensworth is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. There are hotels and other places to stay in and around Segensworth. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
For an older house near a landmark such as St John, older homes can move a little, which is hard on rigid grout and tired sealant. If you let a flat or house near Swanwick station, a joint that keeps failing is best fixed properly while the property is empty. If you look after a building such as Cornerstone CofE (VA) Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Segensworth is about 3 miles north-west of Fareham, in Hampshire. From the centre of Segensworth to the outskirts, we cover remedial sealant for every kind of property. Our area takes in 683 places across Hampshire, large and small. Our Southampton page covers work nearby (7 miles or so).
Work in PO15 and SO31 works the same way as everywhere else we cover. That includes homes and businesses on Witherbed Lane, Brunel Way and Concorde Way and the roads around them. We also cover Titchfield Park (1 mile south), Park Gate (1 mile west), Locks Heath (1 mile south-west), Whiteley (1 mile north) and Titchfield Common (1 mile south-west). Further out, we also cover Winchester (13 miles north), Gosport (6 miles south-east), Havant (11 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south-east) and Horndean (11 miles east).
What’s near Segensworth
Typical jobs here are in homes near The Henry Cort Community College. For rail, the closest station is Swanwick station, about 0.9 miles north-west. A little further out are Fareham Community Hospital (1.2 miles west) and St Andrew's Castle (3.2 miles west). Green spaces nearby include Swanwick Lakes.
Remedial sealant in Segensworth
A joint that keeps failing generally has a reason. A tray that moves, a worktop that is not fixed, the wrong sealant or water getting in elsewhere will beat any new bead. Finding that cause comes before any new sealant. We work on mouldy bath & shower sealant, expansion joints and shrunken worktop sealant, and common reasons people get in touch are caulk or the wrong sealant used in a wet area and wide, uneven beads that look worse than the old ones.
Being in a small place like Segensworth makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or email us.
- Location
- Segensworth (PO15, SO31)
- Region
- Hampshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
FAQs for Segensworth
Do you take on hotel work around Segensworth?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Will you come out to Segensworth?
Yes. Segensworth is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What if the leak is not the sealant?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.
Can you take off two layers of silicone?
Yes. Both layers come out; new silicone doesn’t bond to old silicone, which is why over-sealing fails.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply phone 0345 464 0079 or drop us an email.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Why act early in Segensworth
Adding more sealant is the usual quick fix, and it rarely works. It does not grip the old layer, so the leak carries on and there’s now more to remove. Older cottages and farmhouses around Segensworth can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Doing several joints on one visit generally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Why Segensworth customers choose us
- 12-month guarantee on every job
- An ARBOMaster approved applicator
- Domestic, commercial and hotel work
- Colour agreed with you before any work starts
Read what affects the cost and our reviews.
What affects the cost of remedial sealant
You’ll get a clear quote before we start. It takes into account:
- When we can work, for business premises
- How easy the joints are to reach
- The number of rooms or windows
- Which sealant suits the joint
Leaving a failed joint usually makes the job bigger, not smaller. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Asking for a quote
You don’t need to know the technical terms. Just tell us:
- Roughly how big the job is
- Any access issues, like height or stairs
- Whether it’s a home or a business
- Where the property is
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or send us an email.
Also near Segensworth
Other services in Segensworth
What sealant work can’t fix
Sealant isn’t the answer to every problem, and we’ll tell you before work begins. Sealant will not put right:
- Tiles that have come away from the wall
- Movement from fittings that are not supported
- A tray or bath that is cracked
If you are not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
Where we work in Segensworth
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Expansion joints
- Failed movement joints
How the job changes by surface
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed.
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We work carefully to avoid adding to it, and point out any existing damage.
Landlords, agents and businesses in Segensworth
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
How the visit works
There isn’t much for you to do on the day. Show us the job and we will take it from there. The work itself takes a few hours, depending on how many layers have to come out from start to finish. For a village or hamlet like Segensworth, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Try not to wet indoor joints just before the visit
- Plan for the work area to be out of bounds to pets and children
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.