Hampshire · England
Segensworth Floor Joint Sealing
We cover Segensworth for sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Caulk that has cracked where the floor moves
- Tiled floors with no room to move
- Perimeter joints in tiled floors filled with grout
How we handle floor joint sealing in Segensworth
Where skirting is painted, we can use a flexible sealant that takes paint. For bathrooms and kitchens, silicone is generally the better choice because it handles water. We work on commercial floors, tiled floors and wet room & bathroom floors, and people most often call us about rigid edge joints in tiled floors and open joints around bathroom floor edges.
Somewhere as small as Segensworth, new homes tend to be conversions, self-builds or a few houses rather than an estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
Whatever the size of the job, it’s backed by our 12-month guarantee in Segensworth and across Hampshire.
- Place
- Segensworth (PO15, SO31)
- Region
- Hampshire
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Do you need floor joint sealing in Segensworth?
An open floor joint fills with dirt and water. In wet areas, water runs into the gap at every clean and can reach the subfloor.
Look out for any of the following:
- Skirting that has pulled away from the floor
- Rigid edge joints in tiled floors
- Open joints around bathroom floor edges
- Failed joint filler in concrete floors
If you look after a church, hall or community building such as St John, joints in its floors, skirtings and thresholds need resealing as they wear.
What to look for in a quote
- How the surfaces are prepared before sealing
- What the cure time is
- What product goes in the joint
- Which colour the sealant will be
How it works
We bring everything the job needs with us, so you do not need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a morning or an afternoon for most homes. Somewhere as small as Segensworth, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- We apply a flexible sealant suited to the floor and tooled.
- Finally, we check the work and talk you through aftercare.
Preparing for the visit
- Mention any parking rules near the property
- Mention any leaks or damp you’ve noticed
- Mention if the joints have been sealed before
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Read more
Also near Segensworth
What else we do in Segensworth
Different surfaces, different methods
Wet room and bathroom floors
In a wet room, the floor-to-wall joint is a key line of defence. It’s resealed with a sanitary silicone, and we will tell you if the leak seems to come from elsewhere.
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. They’re resealed with a flexible, water-resistant sealant.
What floor joint sealing looks like in Segensworth
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you let a flat or house near Swanwick station, open skirting and floor joints collect dirt and water, so seal them while the property is empty. Schools such as Cornerstone CofE (VA) Primary School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early.
Segensworth is about 3 miles north-west of Fareham, in Hampshire. We carry out floor joint sealing for homeowners, landlords and businesses in Segensworth and the surrounding area, as part of our work across Hampshire. Our Hampshire coverage runs to 683 places, and Segensworth is one of them. There’s also a page for Southampton, about 7 miles away.
All of PO15 and SO31 is covered for floor joint sealing, from the main roads to the quietest streets. Whether your property is on Witherbed Lane, Brunel Way and Concorde Way or anywhere close by, our applicators can take on the job. Neighbouring places we cover for floor joint sealing include Titchfield Park (1 mile south), Park Gate (1 mile west), Locks Heath (1 mile south-west), Whiteley (1 mile north) and Titchfield Common (1 mile south-west). Within a short drive, we also cover Winchester (13 miles north), Gosport (6 miles south-east), Havant (11 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south-east) and Horndean (11 miles east).
Near you in Segensworth
In Segensworth, that means homes and buildings near The Henry Cort Community College, among other places. For rail, the closest station is Swanwick station, roughly 0.9 miles north-west. Nearby you will also find Fareham Community Hospital (1.2 miles west) and St Andrew's Castle (3.2 miles west). For a walk, there’s Swanwick Lakes.
What affects the quote in Segensworth
The quote reflects the job in front of us. We take into account:
- The old material and how stubborn it is
- Any mould that needs treating
- How easy the joints are to reach
- The product the joint needs
Doing several joints on one visit is usually more efficient than separate visits. We’ll give you a clear price for the lot.
What we need to know
To make quoting easier, please include:
- The problem you’ve noticed
- Where the job is, and your postcode
- How we’d reach the joints
- A few pictures by email, if you can
We do not publish a price list. Instead, we give you a clear price for your job. To arrange one, ring 0345 464 0079 or drop us an email.
What happens if it’s left?
Regrouting a cracked line in a tiled floor rarely fixes it. If the floor needs to move there, the grout will crack again. Replacing that line with flexible sealant gives it somewhere to go. Older cottages and farmhouses around Segensworth can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
What you get with us
- Full insurance on every job
- 4.9 on Google from 180+ five-star reviews
- Domestic, commercial and hotel work
- Tidy, careful work
Take a look at how sealant jobs are priced and what customers say.
Your questions about floor joint sealing in Segensworth
I let a flat near Swanwick station. Can you help?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.
Do you cover Segensworth for floor joint sealing?
Yes, Segensworth is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Are you insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned.
Do you seal warehouse floor joints?
Yes. We reseal concrete floor joints in commercial and industrial units. The product is chosen for the traffic the floor takes.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
What causes gaps between the floor and skirting?
It’s normally the floor moving: heating drying the timber, or a filler that is too rigid. A flexible bead keeps up with the movement.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few photos.
When something else is needed
To be straight with you, some problems need a different trade:
- Leaks from a failed tanking system
- Damaged concrete that needs breaking out and repairing
- Movement too big for a sealant joint
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Joints and surfaces we work on
- Thresholds
- Concrete floor joints
- Skirting boards
- Wet room & bathroom floors
- Tiled floors
- Commercial floors