Hampshire · England
Fire-rated sealant in Segensworth, Hampshire
Fire rated sealant for Segensworth, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Open joints along the top of partitions
- Seals cut through by electricians, plumbers or data installers
- Old fire sealant that has split or come away
How we handle fire rated sealant in Segensworth
We don’t assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. Typical jobs include unsealed gaps where pipes and cables go through a wall and joints picked up in a fire-stopping survey, across flats & HMOs, door frames and pipe & cable gaps.
Somewhere as small as Segensworth, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
Every job is covered by our 12-month guarantee.
- Location
- Segensworth (PO15, SO31)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about fire rated sealant in Segensworth
Do you work for hotels and guest houses in Segensworth?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Do you cover smaller places like Segensworth?
Yes. Segensworth is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you have insurance?
Yes. Full insurance covers our work.
Where are you based?
We work from Crawley. Our applicators cover Segensworth.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Can I choose the sealant colour?
Most of the time, yes. We’ll tell you which colours the right product comes in.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Also near Segensworth
Also in Segensworth
Fire rated sealant in Segensworth: local notes
For seaside hotels, guest houses and holiday lets around Segensworth, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
If you let a flat or house near Swanwick station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For buildings such as St John, service openings in its walls need the right fire-rated sealant, as in any building.
Segensworth is about 3 miles north-west of Fareham, in Hampshire. Whether you are in the middle of Segensworth or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Segensworth is one of 683 towns and villages in Hampshire we cover. For nearby work, see our Southampton page.
All of PO15 and SO31 is covered for fire rated sealant, from the main roads to the quietest streets. You’ll find streets such as Witherbed Lane, Brunel Way and Concorde Way, and we cover them all. Close by, we work in Titchfield Park (1 mile south), Park Gate (1 mile west), Locks Heath (1 mile south-west), Whiteley (1 mile north) and Titchfield Common (1 mile south-west). Further out, we also cover Winchester (13 miles north), Gosport (6 miles south-east), Havant (11 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south-east) and Horndean (11 miles east).
Around Segensworth
Typical jobs here are in homes near The Henry Cort Community College. Segensworth’s nearest station is Swanwick station, about 0.9 miles north-west of the centre. A little further out are Fareham Community Hospital (1.2 miles west) and St Andrew's Castle (3.2 miles west). Not far away are Swanwick Lakes.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
What happens if it’s left?
Squirting in whichever sealant is nearest doesn’t make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, which is why we match the product and the method to each gap. In a small place like Segensworth, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Why us?
- 4.9 on Google from 180+ five-star reviews
- We never seal over old sealant
- A 12-month guarantee on all work
- Neat joints and a tidy finish
Take a look at what affects the cost or customer reviews.
What affects the quote in Segensworth
The price is agreed before any work begins. It takes into account:
- Mould in or behind the old joints
- The size of the job
- How easy the joints are to reach
- The type of sealant required
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll explain what it covers.
What to tell us for a quote
When you call or email, it’s useful to know:
- Roughly how big the job is
- The address or postcode of the job
- How we’d reach the joints
- If someone has resealed it before
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.
What we can’t put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Issuing a fire rating or certificate for a building
- Problems with the door itself rather than the gap around the frame
- A wall that isn’t a fire-resisting element to begin with
If you are not sure, just ring 0345 464 0079 or email us and we will give you a straight answer before you book.
What we seal
- Plasterboard & masonry
- Linear gaps
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Service penetrations
Landlord and commercial work in Segensworth
We work for landlords and agents as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
What happens on the day
We bring everything the job needs with us, so you do not need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours for a handful of gaps, and longer for a whole building. In a small place like Segensworth, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- For business premises, tell us about site rules or sign-in
- Clear items away from the joints we’re working on
- Mention any tricky access
How to get a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
When to call us in Segensworth
Over time, buildings change layout and use. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
If you can see any of these, it’s time to have the joints looked at:
- Fire seals that have cracked with movement
- Gaps left after a refit or conversion
- Open joints along the top of partitions
- Sealant items on a fire risk assessment action list
Managing a site like Cornerstone CofE (VA) Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Questions to ask before booking
- What happens if the job turns out different
- Are they insured?
- Whether they seal over old material or remove it
- The length of the guarantee