Hampshire · England
Remedial Sealant in Burridge
Removing failed, mouldy or leaking sealant and putting it right for householders, landlords and businesses in Burridge. Fully insured, ARBOMaster approved and guaranteed for a year.
- Sealant that came away because the surface wasn’t prepared
- Torn expansion joints
- Smears and lumps from a botched reseal
Landlord and commercial work in Burridge
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Remedial sealant in Burridge, done properly
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are ARBOMaster approved and fully insured, and every remedial job comes with a 12-month guarantee. Typical jobs include a shower that leaks however often it’s resealed and mould trapped under a layer of silicone, across leaking tray & enclosure joints, failed movement joints and botched or over-sealed joints.
In a village or hamlet like Burridge, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
We stand behind the work with a 12-month guarantee, so you are covered after we’ve gone.
- Place
- Burridge (PO15, SO31)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
When to call us in Burridge
Joints that move need sealant that can stretch. Flexing baths, rocking trays and building movement joints split any bead that is too stiff or too thin.
The problems people generally mention when they call include:
- Repeat leaks from the same joint
- Black mould underneath the bead
- Caulk or the wrong sealant used in a wet area
- Over-sealed joints coming away
Letting a property close to Swanwick station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
What to look for in a quote
- What happens if they find a problem under the old sealant
- Whether all the old sealant comes out first
- How the surfaces are prepared before sealing
- Who turns up on the day
Questions from Burridge
Can you do remedial sealant in Burridge?
Yes. Our work covers London and the South East, and Burridge is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we will send you a clear quote.
Do you work for landlords with property near Swanwick station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we are done.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Do you offer different sealant colours?
Most of the time, yes. We will tell you which colours the right product comes in.
Remedial sealant around Burridge
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For site and facilities teams at buildings such as Whiteley Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Burridge is about 3 miles south-east of Hedge End, in Hampshire. Jobs in Burridge get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 683 towns and villages across Hampshire. Our Southampton page covers work nearby (6 miles or so).
Every address in PO15 and SO31 is covered for remedial sealant, from the main roads to the quietest streets. You’ll find streets such as Dumas Drive, Jerome Street and Coleridge Drive, and we cover them all. Main roads around Burridge include the A3051, so getting to you is simple. If you’re just outside Burridge, we cover Whiteley (1 mile south-east), Park Gate (1 mile south), Swanwick (1 mile south-west), Sarisbury (1 mile south-west) and Segensworth (2 miles south-east). We also work in nearby towns such as Winchester (12 miles north), Gosport (8 miles south-east), Havant (12 miles east), Eastleigh (7 miles north-west), Fareham (4 miles south-east) and Horndean (11 miles east).
Near you in Burridge
We work in homes and buildings around Brookfield Community School and Language College. The nearest railway station is Swanwick station, roughly 1 mile south of the centre. Well-known places in the area include Fareham Community Hospital (1.4 miles south-west) and Bursledon Brickworks Industrial Museum (1.3 miles west). For a walk, there’s Swanwick Lakes.
Quotes for remedial sealant in Burridge
You’ll get a clear quote before we start. It’s based on:
- The number and length of the joints
- Whether the work is at height
- The number of rooms or windows
- The type of sealant required
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
What we need to know
When you contact us, these details help:
- A few pictures by email, if you can
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or email us.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The process
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the job takes a few hours, depending on how many layers have to come out in most cases. Somewhere as small as Burridge, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
How to prepare
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
- Let us know about stairs, lifts or work at height
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
Read more
Towns and villages near Burridge
What else we do in Burridge
How the job changes by surface
Leaking trays & enclosures
If the tray is cracked, or the leak is from the valve or waste, sealant will not fix it. We say so rather than reseal.
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. It’s cut out, degreased and resealed in a colour to suit.
Aftercare tips
So the new joints stay in good condition:
- Keep bleach and abrasives off the bead
- Never fill a movement joint with mortar or grout
- Do not add new sealant on top of old
- Look for stains below bathrooms now and then
Watch the joint over the first few weeks, especially if movement was the problem. If anything changes, just phone 0345 464 0079 or send us an email.
Don’t keep resealing the same joint. Have someone find out why, or the next bead will go the same way.