Greater London · England
Putney Vale Remedial Sealant
Problem with your failed sealant joints in Putney Vale? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- A shower that leaks however often it’s resealed
- Decorators’ caulk around a bath or shower
- Over-sealed joints coming away
Remedial sealant in Putney Vale, done properly
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, taking care not to scratch the surfaces around it. Only then can new sealant bond. If you’re dealing with beads that never stuck properly and wide, uneven beads that look worse than the old ones, we can help, whatever the surface.
Across London, a large share of homes are flats, conversions or mansion blocks, and many bathrooms sit right above someone else’s ceiling. In Putney Vale, that’s a good reason to put tired sealant and grout right early.
You’re covered for a year from the day we finish. If anything is not right with it, call 0345 464 0079 or drop us an email.
- Place
- Putney Vale (SW15, KT2, SW19)
- Wider area
- Greater London
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Do you need remedial sealant in Putney Vale?
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks, especially in damp, poorly aired rooms. Then the only fix is removal and a new bead.
The most common problems we see are:
- Black mould underneath the bead
- Over-sealed joints coming away
- Thick, messy sealant smeared over tiles
- Decorators’ caulk around a bath or shower
If you look after a building such as Hall School Wimbledon, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before you book anyone
- Who turns up on the day
- Which colour the sealant will be
- What the cure time is
- Which sealant they’ll use, and why
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Have loose fittings fixed before resealing
- Keep bleach and abrasives off the bead
- Keep the room well ventilated
- Deal with small splits early
If we have found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Sorting it early limits the damage.
Common questions in Putney Vale
Is parking a problem for a job in Putney Vale?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. The visit is then planned around what’s available.
Could a tired shower seal in my Putney Vale flat affect the neighbours below?
It can, yes: water that gets past a split bead or cracked grout often runs under the tray and shows on the ceiling below. Replacing the sealant and grout before that happens is much less trouble than repairing a neighbour’s ceiling.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area.
Do you have insurance?
Yes. We are fully insured.
What if resealing will not fix my leak?
We will tell you. A cracked tray, faulty valve or leaking waste needs a different trade, so we will not pretend it will.
What information do you need?
A short description and the location. If we need more, we will ask.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Surface by surface
Leaking trays & enclosures
Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. Both are checked before we reseal.
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. We strip it back so we can see the joint, and then we reseal it neatly.
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
What we do, step by step
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many layers have to come out, and the area is left clean. In Putney Vale, flats, stairs and shared entrances are part of the routine. If the building has a concierge, managing agent or access rules, tell us when you book.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Keep pets and children clear of the area while we work
- For business premises, tell us about site rules or sign-in
How to get a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.
Advice
Bathrooms and kitchens in Putney Vale
In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early. London’s water is hard, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as St John the Baptist, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Raynes Park station, botched sealant from a previous quick fix is easier to strip out between tenants.
Putney Vale is about 2 miles north-west of Wimbledon, in Greater London. Every kind of property in Putney Vale can book us for remedial sealant, old or new, large or small. Every job comes with our one-year guarantee. We cover 764 towns and villages across Greater London, large and small. Our London page covers work nearby.
We work across SW15, KT2 and SW19 for remedial sealant and the streets around it. That includes homes and businesses on Stag Lane, Friars Avenue and Kingston Road. With the A308 close by, Putney Vale is easy for our applicators to reach for remedial sealant. We also cover Kingston Vale (1 mile south), Coombe Hill (1 mile west), Coombe (1 mile south-west), Crooked Billet (1 mile south-east) and Copse Hill (1 mile south-east). Larger places within reach include London (8 miles north-east), City of Westminster (7 miles north-east), Marylebone (7 miles north-east), Kensington (5 miles north-east), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).
Near you in Putney Vale
Around Putney Vale, our work takes us to homes and buildings near Robin Hood Primary School, Duke of Cambridge pub and Wimbledon Common. The nearest railway station is Raynes Park station, roughly 2 miles south-east. A little further out are Wimbledon Windmill Museum (0.8 miles east) and Putney Exchange (2.5 miles north-east). For a walk, there’s Kew Gardens Lake and Fishpond Wood and Beverley Meads.
Honest limits
A few problems are outside what sealant work can do:
- Cracks in the fitting rather than the joint
- Older mastics that may need an asbestos check before removal
- Plumbing leaks behind walls or under trays
If you are not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer.
What we seal
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Expansion joints
- Failed movement joints
- Shrunken worktop sealant
- Botched or over-sealed joints
Towns and villages near Putney Vale
More services for Putney Vale
Why it’s worth doing now in Putney Vale
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. Dealing with the joint now is a small job by comparison. Converted houses in London often have a bathroom above someone else’s living room, and a slow leak from a failed seal can end up in the flat below. Dealing with it early is far simpler.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why Putney Vale clients choose us
- A 12-month guarantee on all work
- Anti-fungal sanitary silicone in wet areas
- Approved under the ARBOMaster scheme
- We agree the colour with you first
See our cost guide and customer reviews.