Isle of Wight · England
Remedial sealant & repairs in Ningwood, Isle of Wight
Removing failed, mouldy or leaking sealant and putting it right in Ningwood, with a one-year guarantee on every job. Ask us for a quote.
- A shower that leaks however often it’s resealed
- Caulk or the wrong sealant used in a wet area
- Thick, messy sealant smeared over tiles
How to look after the new joints
A little care helps the new joints last. Our advice:
- Always have old sealant cut out, not covered
- Keep the room well ventilated
- Use a soft cloth, not a scourer, on silicone
- Check trays and worktops do not move
Go easy on the new sealant: a mild cleaner and a soft cloth, with no blades or scourers.
Signs to act on: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Any of them means it’s time for remedial work.
Remedial sealant in Ningwood
Water on the floor doesn’t always mean failed silicone. Cracked trays, leaking wastes and faulty valves often look like a sealant problem. If that’s what we find, we will tell you rather than reseal something that won’t fix it. We work on expansion joints, leaking tray & enclosure joints and botched or over-sealed joints, and common reasons people get in touch are repeat leaks from the same joint and dark patches showing through the sealant.
For a small place like Ningwood, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Place
- Ningwood (PO41)
- Region
- Isle of Wight
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of remedial sealant
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- Whether there’s mould to deal with
- The type of sealant required
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or email us and we will talk you through it.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- Any previous sealing or DIY work
- Photos by email, if that is easy
- The address or postcode of the job
- The problem you’ve noticed
If you’re in Ningwood and need remedial sealant, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Why act early in Ningwood
Spraying mould remover on a sealed-over joint does not reach what’s underneath. The layers have to come out, so the joint can be treated and resealed. Around Ningwood, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why Ningwood clients choose us
- Every job guaranteed for a year
- Arbo and Everbuild products
- A sealant colour to suit the surroundings
- We never seal over old sealant
See our cost guide and customer reviews.
What remedial sealant looks like in Ningwood
Ningwood is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Shalfleet Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Ningwood is about 6 miles west of Newport, in the Isle of Wight. Every kind of property in Ningwood can book us for remedial sealant. The work is guaranteed for a year. Across the Isle of Wight, we cover 125 places, Ningwood among them. You can also see our page for Southampton, about 16 miles away.
Work in PO41 works the same way as everywhere else we cover. Close by, we work in Newbridge (1 mile south-east), Wellow (1 mile west), Thorley Street (1 mile west), Shalcombe (2 miles south) and Calbourne (2 miles south-east). Further out, we also cover Newport (6 miles east), Ryde (12 miles east), Cowes (7 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (12 miles south-east). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Landmarks near Ningwood
We work in homes and buildings around New Inn, among other places. A little further out are St Mary's Hospital (5.9 miles east) and Yarmouth Castle (3.1 miles west). Not far away are Lymington and Keyhaven Marshes Nature Reserve and Westover Down.
Your questions about remedial sealant in Ningwood
Is Ningwood within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you do remedial sealant in Ningwood?
Yes. We work across London and the South East, and Ningwood is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
Are you insured?
Yes. Full insurance covers our work.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done.
What if resealing won’t fix my leak?
We’ll tell you. A cracked tray, faulty valve or leaking waste needs a different trade, so we will not pretend it will.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint.
Can landlords and businesses book you?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
How it works
At the end, we look at the finished work together. The visit itself generally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the amount of work. Somewhere like Ningwood needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
Get a quote
There’s no standard price list. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or drop us an email.
Read more
When it is not the sealant
We won’t take on work that will not last, so here’s what sealant can’t put right:
- Sealant in an older building that needs testing for asbestos first
- Plumbing leaks behind walls or under trays
- A bath, tray or worktop that moves until it’s properly fixed
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
What we’re called out for in Ningwood
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, cannot stretch, and tears at the first real movement. Backing sets the depth and stops that.
Common reasons people contact us include:
- Mould trapped under a layer of silicone
- Thick, messy sealant smeared over tiles
- Decorators’ caulk around a bath or shower
- A second bead peeling off the first
Homes close to Church of St. Michael the Archangel include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- Is the old sealant removed completely?
- Who turns up on the day
- Which sealant they’ll use, and why
- The length of the guarantee