Edinburgh · Scotland
Cramond Remedial Sealant
Failed sealant joints in Cramond need attention? We remove the old material, prepare the joints and seal them properly.
- Thick, messy sealant smeared over tiles
- Repeat leaks from the same joint
- Torn expansion joints
Remedial sealant for homes and businesses in Cramond
Remedial jobs in Cramond usually fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. Common call-outs are for a second bead peeling off the first and leaks that keep coming back after resealing, on expansion joints, mouldy bath & shower sealant and failed movement joints.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
All our work is covered by a one-year guarantee.
- Location
- Cramond (EH4)
- Region
- Edinburgh
- Cover
- A year, on every job
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Bathrooms and kitchens in Cramond
Cramond is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
If you look after a building such as Craigmount High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Edinburgh Gateway station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Cramond is about 3 miles west of Comely Bank, in Edinburgh. We provide remedial sealant to householders, landlords and businesses in Cramond and the surrounding area. Our Edinburgh coverage runs to 175 places, Cramond among them.
We cover every part of the EH4 postcode area for remedial sealant. If you need remedial sealant at a property on Avon Road, Essex Road and Whitehouse Road or a nearby road, we can help. Nearby, we also carry out remedial sealant in Braepark (1 mile west), Barnton (1 mile south-west), Cammo (1 mile south-west), Bughtlin (1 mile south) and East Craigs (1 mile south). Within a short drive, we also cover Edinburgh (4 miles south-east), Leith (5 miles east), Bonnington (5 miles east), Greenside (4 miles east), Broughton (4 miles east) and Bellevue (4 miles east).
What’s near Cramond
For rail, the closest station is Edinburgh Gateway station, about 1.9 miles south-west. Well-known places in the area include The Gyle Shopping Centre (2 miles south) and Craigcrook Castle (1.6 miles south-east). Open spaces near Cramond include The New Leaf Co-op and Dundas Loch.
Towns and villages near Cramond
What else we do in Cramond
Your questions about remedial sealant in Cramond
Can you do remedial sealant in Cramond?
Yes. We work across all of Scotland, and Cramond is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will give you a clear quote.
Is Cramond within the area you cover?
Yes, Cramond is covered. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How much does remedial sealant cost in Cramond?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before work begins.
Do you do commercial work?
Yes. We’ve worked for hotels, offices and other businesses and we’re fully insured.
Do you guarantee remedial jobs?
Yes. Our one-year guarantee covers the work, and we’re ARBOMaster approved.
Can old silicone be taken off without scratching the tiles?
Yes. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. We point out any damage that’s already there.
Is there any odour?
There can be a smell while the sealant cures. Ventilation helps.
Why act early in Cramond
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.
Why choose Mr Mastic in Cramond
- We never seal over old sealant
- Arbo and Everbuild products
- Neat joints and a tidy finish
- ARBOMaster approved applicator
See what affects the cost and what customers say.
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Keep the room well ventilated
- Always have old sealant cut out, not covered
- Keep an eye on the ceiling below the bathroom
- Keep bleach and abrasives off the bead
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
How it works
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours for a typical bath or shower, longer where several layers have been applied, and we tell you how long to leave it before we go. Outside jobs in Cramond need a dry day, because sealant won’t bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Mention any tricky access
How to get a quote
Every job is quoted individually. Simply send an email to info@mrmastic.co.uk and describe the job and send pictures if you have them.
Read more
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- A leaking trap, valve or supply pipe
- A cracked shower tray or bath (that needs repair or replacing)
- A tray or worktop that needs refixing first
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before booking.
Surfaces we seal
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Failed movement joints
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Landlord and commercial work in Cramond
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Quotes for remedial sealant in Cramond
We quote each job individually. These are the things that affect it:
- Mould in or behind the old joints
- The size of the job
- Working hours on commercial sites
- How many areas need sealing
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.
Asking for a quote
To help us quote quickly, please include:
- A few pictures by email, if you can
- What the problem is, such as mould, gaps, leaks or cracking
- Where the property is
- Any access issues, like height or stairs
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.