Highland · Scotland
Remedial sealant & repairs in Corran, Highland
Remedial sealant for Corran, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Worktop sealant that has shrunk and split
- Over-sealed joints coming away
- Floor or wall movement joints that have failed
Why deal with it now?
Spraying mould remover on a sealed-over joint doesn’t reach what’s underneath. The layers have to come out, so the joint can be treated and resealed. Around Corran, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Combining jobs into one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear quote for the lot.
Why Corran customers choose us
- Homes, businesses and hotels
- Every job guaranteed for a year
- We never seal over old sealant
- White, clear, grey or coloured to suit, where the product allows
Take a look at our cost guide or what customers say.
Remedial sealant for homes and businesses in Corran
Water on the floor doesn’t always mean failed silicone. Cracked trays, leaking wastes and faulty valves often look like a sealant problem. When the fault is elsewhere, we say so instead of resealing for the sake of it. We work on botched or over-sealed joints, leaking tray & enclosure joints and shrunken worktop sealant, and common reasons people get in touch are wide, uneven beads that look worse than the old ones and worktop sealant that has shrunk and split.
A bathroom in a place like Corran gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Corran (PH33)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Signs you need remedial sealant in Corran
A lot of failed joints have been sealed over rather than replaced. New silicone can’t stick to the old bead, so the top layer lifts and water and mould collect between the two.
Look out for any of the following:
- Torn expansion joints
- Decorators’ caulk around a bath or shower
- Thick, messy sealant smeared over tiles
- Sealant peeling off a dusty or damp surface
In the older streets around Ardgour Parish Church, walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- How much experience the applicator has
- Whether they’re fully insured
- The length of the guarantee
- What preparation is included
Your questions about remedial sealant in Corran
Do you cover smaller places like Corran?
Yes, Corran is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for hotels and guest houses in Corran?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then email us at info@mrmastic.co.uk.
Is remedial work guaranteed?
Yes. Every job comes with our one-year guarantee.
Can you remove sealant that’s been put over old sealant?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
How long does the work take?
Longer than a simple reseal, because every layer has to come out. For most joints, it’s a few hours.
How do I get a quote for remedial sealant in Corran?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before any work starts.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Nearby places to Corran
Other services in Corran
Remedial sealant around Corran
Corran is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Around Corran, as everywhere, remedial sealant is only as good as the preparation behind it.
Corran is in Highland. Whether you are in the middle of Corran or further out, we cover remedial sealant for every kind of property. Our Highland coverage runs to 253 places, and Corran is one of them. Glasgow is on our list too, around 71 miles away.
Postcode districts we cover here for remedial sealant: PH33. Close by, we work in Clo Mhuillin (1 mile south-west), Inchree (1 mile east), Kentallen (3 miles south), Duror (5 miles south) and Ballachulish (5 miles south-east). Within a short drive, we also cover Fort William (8 miles north-east), Caol (10 miles north-east), Inverlochy (9 miles north-east) and Kinlochmore (11 miles east). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.
Around Corran
Open spaces near Corran include Ardsheal Hill and Lochan na Luireach.
The process
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take a few hours, depending on how many layers have to come out. For a place like Corran, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
Before we arrive
- Mention any tricky access
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Just email us at info@mrmastic.co.uk with the details, and photos are welcome.
Related advice
Quotes for remedial sealant in Corran
Some jobs are bigger than they look, and some smaller. The main factors:
- Working hours on commercial sites
- How easy the joints are to reach
- The number of rooms or windows
- Any mould that needs treating
What you pay reflects the work, not guesswork. That is why we ask about the job first and give you a clear price before we start.
What to tell us for a quote
To make quoting easier, let us know:
- If it’s domestic, commercial or a hotel
- Where the job is, and your postcode
- Any access issues, like height or stairs
- Roughly how big the job is
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
What we can’t put right
A few problems are outside what sealant work can do:
- Sealant in an older building that needs testing for asbestos first
- A tray or bath that is cracked
- Tiles that have come away from the wall
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before you book.
What we seal
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Expansion joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Failed movement joints
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Aftercare tips
A little care helps the new joints last. Our advice:
- Run the fan after every shower
- Have loose fittings fixed before resealing
- Do not add new sealant on top of old
- Keep bleach and abrasives off the bead
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Don’t keep resealing the same joint. Have someone find out why, or the next bead will go the same way.