Orkney Islands · Scotland

Remedial Sealant in Burray Village

Specialist remedial sealant for Burray Village: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Movement joints that have split or pulled away
  • Sealant peeling off a dusty or damp surface
  • Products that weren’t meant for the joint

Remedial sealant near Burray Village

FAQs for Burray Village

Is Burray Village in your area for remedial sealant?

Yes. Our work covers the whole of Scotland, and Burray Village is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.

Do you cover smaller places like Burray Village?

Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.

Will it make a mess?

No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.

Can you work on commercial sites?

Yes, regularly. We can plan bigger jobs in stages to suit the site.

Can you remove sealant that is been put over old sealant?

Yes. We remove every layer; over-sealing fails because silicone won’t bond to silicone.

Does someone need to be in?

That depends on where the joints are. Inside work needs someone to give us access.

How long does the work take?

It takes a few hours, depending on how many layers have to come out. We’ll give you a timescale when we quote.

Can I add another job to the visit?

Yes. Just list everything you need.

Remedial sealant in Burray Village

Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. We work on leaking tray & enclosure joints, mouldy bath & shower sealant and expansion joints, and the jobs we see most are floor or wall movement joints that have failed and sealant that came away because the surface wasn’t prepared.

Being further from a city doesn’t change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.

All our work comes with our 12-month guarantee, wherever you are in the Orkney Islands.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Where
Burray Village (KW17)
Wider area
Orkney Islands
Cover
12 months on all our work
Quotes
A clear price before work begins
Email
info@mrmastic.co.uk
Page updated
26 October 2026

The process

Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours for most joints, depending on how much old sealant has to come out. For a place like Burray Village, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.

  1. First we find out how and where the joint has failed.
  2. Every layer of old sealant is cut and cleaned out.
  3. We clean the joint, treat any mould and let it dry.
  4. We use the right backing and sealant for any joint that moves.
  5. We tool the joint and tell you about anything else that needs attention.

Preparing for the visit

  • Keep pets and children clear of the area while we work
  • For indoor joints, keep the area dry beforehand if you can
  • Mention any leaks or damp you’ve noticed

Get a quote

To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.

Get a quick quote

Read more

Landlord and commercial work in Burray Village

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

If you manage several properties in or around Burray Village, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.

Should I try it myself first?

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

When it is not the sealant

We’d rather tell you now than do work that won’t last, so these are the limits:

  • A tray or bath that’s cracked
  • Movement from fittings that aren’t supported
  • Sealant in an older building that needs testing for asbestos first

Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.

What we seal

  • Shrunken worktop sealant
  • Failed movement joints
  • Expansion joints
  • Botched or over-sealed joints
  • Leaking tray & enclosure joints
  • Mouldy bath & shower sealant

Why it’s worth doing now in Burray Village

Ripping out a bathroom isn’t normally needed. If the bath, tray and tiles are sound, remedial resealing usually puts it right. If they’re not, we’ll tell you. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.

What you get with us

  • Rated 4.9 stars on Google
  • Approved under the ARBOMaster scheme
  • Colour agreed with you before we start
  • Experience in homes, commercial sites and hotels

See how sealant jobs are priced and what customers say.

Different surfaces, different methods

Movement & expansion joints

Movement joints in floors, walls and façades need a flexible sealant set to the right depth. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed with a low-modulus product.

Worktops & kitchens

Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning.

Bathrooms and kitchens in Burray Village

Burray Village is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.

Around Burray Village, as everywhere, remedial sealant is only as good as the preparation behind it. Whether the job is in Burray Village itself or nearby, the right material for each joint matters as much as a neat finish.

Burray Village is about 9 miles south of Kirkwall, in the Orkney Islands. If you need remedial sealant in Burray Village, please email us at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover the Orkney Islands. Across the Orkney Islands, we cover 51 places, Burray Village among them.

Postcode districts we cover here for remedial sealant: KW17. We cover properties on Lairds Road, Upper Waston Road and Sunfield. We also cover the places around Burray Village: Grimness (1 mile south), St Margaret's Hope (2 miles south-west), St Mary's (4 miles north), Widewall (4 miles south-west) and Upper Sanday (6 miles north-east). As one of the bigger places in the Orkney Islands, Burray Village has homes, rented property and businesses of every kind. Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.

Local landmarks in Burray Village

Other landmarks nearby include W Hourston Blacksmiths Museum (2.1 miles south-west). For a walk, there’s Echna Loch and Ward Hill.

Map of Burray Village © OpenStreetMap contributors

Quotes for remedial sealant in Burray Village

Call for a quick quote. What matters most is:

  • The number and length of the joints
  • Mould in or behind the old joints
  • Whether old sealant or filler has to be cut out
  • When we can work, for business premises

The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.

What we need to know

When you contact us, these details help:

  • The rough size of the job
  • Where the job is, and your postcode
  • What’s wrong with the joints now
  • Any access issues, like height or stairs

Need a quote? Please email us at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job