Orkney Islands · Scotland
Gutter Sealing in Burray Village
Gutter sealing across Burray Village and nearby, with every bit of old sealant taken out first.
- End caps that drip every time it rains
- Internal damp traced to a gutter joint
- Garage door frames letting rain in
Landlords, agents and businesses in Burray Village
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Gutter sealing in Burray Village, done properly
Across Burray Village, we reseal gutter joints, end caps and roofline trims. Single-storey and low gutters are simple to reach, and for higher work, tell us about access and we will confirm what’s needed. We work on gutter end caps, garage door frames and gutter joints, and the jobs we see most are open joints in fascias and soffits and rain getting in around a garage door.
Older stone buildings need a sealant that suits the stone, not an acetoxy product that can mark or attack it. On newer homes, the movement joints and roofline trims are what need watching.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Where
- Burray Village (KW17)
- Region
- Orkney Islands
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Burray Village questions
Is Burray Village within the area you cover?
Yes. Burray Village is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Does the coastal weather in Burray Village affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Do you work for hotels and businesses?
Yes. We’ve worked for hotels, offices and other businesses.
How long does the job take?
As a guide, most jobs take anything from an hour or two to a few hours. Bigger jobs take longer, and we’ll say how long yours will take.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Will sealant fix a dripping gutter joint?
In many cases, yes. A clean, dry joint resealed with gutter sealant generally stops the drip. A split or warped section needs replacing.
Quotes for gutter sealing in Burray Village
We do not publish a price list, because jobs vary so much. What we look at:
- The number and length of the joints
- Working hours on commercial sites
- The product the joint needs
- How many rooms, windows or areas are involved
What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.
What to tell us for a quote
You don’t need to know the technical terms. Just tell us:
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
How to look after the new joints
Looking after new joints is easy:
- Check the gutters during heavy rain
- Get a dropping gutter looked at quickly
- Check fascia and soffit joints for gaps
- Get leaks sealed before the wet months
Clear the gutters once or twice a year, so water drains away past the joints. Standing water strains every seal.
If an end cap is dripping, deal with it before winter. Water down the wall all winter can cause damp inside.
Surface by surface
Garage door frames
Frame-to-brick joints face the weather. An exterior sealant suits them.
Gutter end caps
We seal end caps from the inside where we can reach, after cleaning and drying.
Also near Burray Village
What else we do in Burray Village
What we do, step by step
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes anything from an hour or two to a few hours, depending on the amount of work. In smaller Scottish places, parking is usually less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Preparing for the visit
- Clear items away from the joints we’re working on
- Keep children and pets away from the work area
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved.
Read more
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
Outside joints around Burray Village
Burray Village is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
Whether the job is in Burray Village itself or nearby, the right material for each joint matters as much as a neat finish. In and around Burray Village, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Burray Village is about 9 miles south of Kirkwall, in the Orkney Islands. Homes, rented property, offices and hotels in Burray Village is covered for gutter sealing. The work is guaranteed for a year. Our area takes in 51 places across the Orkney Islands.
We cover every part of the KW17 postcode area for gutter sealing and the streets around it. Local streets include Lairds Road, Upper Waston Road and Sunfield. If you are just outside Burray Village, we cover Grimness (1 mile south), St Margaret's Hope (2 miles south-west), St Mary's (4 miles north), Widewall (4 miles south-west) and Upper Sanday (6 miles north-east). Burray Village is one of the larger places we cover in the Orkney Islands. Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Burray Village
A little further out are W Hourston Blacksmiths Museum (2.1 miles south-west). Green spaces nearby include Echna Loch and Ward Hill.
When something else is needed
A few problems are outside what sealant work can do:
- Fascias that need replacing
- Blocked downpipes
- Guttering that needs replacing
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Burray Village
- Garage door frames
- uPVC fascias
- Roofline trims
- Gutter joints
- Soffit joints
- Gutter end caps