Orkney Islands · Scotland
Gutter Sealing in Widewall
Professional gutter sealing in and around Widewall, with every bit of old sealant taken out first.
- Gaps along fascia and soffit joints
- End caps that drip every time it rains
- Drips from gutter joints and end caps
Honest limits
We will not take on work that will not last, so here’s what sealant can’t put right:
- Gutters that have dropped or pulled away
- Water backing up from a blocked pipe
- Fascias that need replacing
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
Surfaces we seal
- Roofline trims
- uPVC fascias
- Gutter joints
- Soffit joints
- Gutter end caps
- Garage door frames
Gutter sealing in Widewall
Across Widewall, we reseal gutter joints, end caps and roofline trims. Low-level work is straightforward, and for higher work, tell us about access and we will confirm what’s needed. We work on gutter joints, soffit joints and uPVC fascias, and people most often call us about trim joints where the sealant has failed and old gutter sealant that has let go.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. On newer homes, the movement joints and roofline trims are what need watching.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Where
- Widewall (KW17)
- Wider area
- Orkney Islands
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026

Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
How to look after the new joints
Looking after new joints is easy:
- Keep downpipes clear
- Keep ladders off the guttering
- Clean out the gutters once or twice a year
- Check the gutters during heavy rain
Have a look at the gutter during a downpour. Drips are easiest to spot while it’s raining.
The sooner a gutter leak is sealed, the less water reaches the wall. We’ll let you know if the gutter needs more than sealant.
The process
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours, depending on the number of joints and the access. Somewhere like Widewall may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- The sealant is applied and finished.
- The joints are checked once sealed.
Preparing for the visit
- Mention any leaks or damp you’ve noticed
- Mention any sign-in or site rules at work premises
- Move anything stored near the joints
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work.
Advice
Other services in Widewall
What gutter sealing looks like in Widewall
Widewall is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Harled (roughcast) walls are common in Scotland, and joints where harling meets other materials need a sealant that can grip and flex.
In and around Widewall, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Widewall is about 12 miles south of Kirkwall, in the Orkney Islands. If you need gutter sealing in Widewall, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We cover the Orkney Islands from our Crawley base, Widewall included. Widewall is one of 51 towns and villages in the Orkney Islands we cover for gutter sealing.
Postcode districts we cover here for gutter sealing: KW17. Widewall is on the B9042, which makes it straightforward to reach. Nearby, we also carry out gutter sealing in St Margaret's Hope (2 miles north-east), Grimness (3 miles north-east), Burray Village (4 miles north-east), St Mary's (7 miles north) and Lyness (8 miles west). If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
Near you in Widewall
Nearby you will also find W Hourston Blacksmiths Museum (1.6 miles north-east). Not far away are Mill Pond and Ward Hill.
Widewall questions
Does the coastal weather in Widewall affect outside sealant?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are normally the first to need attention.
Can you do gutter sealing in Widewall?
Yes, Widewall is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
What guarantee comes with the job?
Every job comes with our 12-month guarantee, and we are fully insured.
Do you replace gutters or fascias?
That’s not something we do. We seal joints; replacing gutters and fascias needs a gutter or roofline installer.
Do you have insurance?
Yes. Full insurance covers our work.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
What information do you need?
Let us know what needs doing and where, with pictures by email if possible. If we need more, we’ll ask.
Does someone need to be in?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Why deal with it now?
Water from a leaking joint hits the same spot every time. Left, it can stain walls and lead to damp, so it’s worth sealing early. In a place like Widewall, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
What you get with us
- An ARBOMaster approved applicator
- White, clear, grey or another colour, product permitting
- Neat joints and a tidy finish
- 20+ years of sealant experience
See our cost guide or our reviews.
When to call us in Widewall
Overflowing gutters can look like leaking joints. If the downpipe is blocked, water has nowhere to go, which is why we look before we seal.
Common reasons people contact us are:
- Water running down the wall below the gutter
- Failed sealant on a garage door frame
- Damp patches inside below a leaking gutter
- Fascia boards with gaps between them
Whether the job is in Widewall itself or nearby, the right material for each joint matters as much as a neat finish.
Comparing quotes
- How long to leave it before use
- Who turns up on the day
- What insurance they hold
- What the quote includes, VAT included or not
Surface by surface
Gutter joints
Most gutter leaks start at a joint between sections. We clean, dry and reseal them.
Soffit joints
Soffits sit under the eaves, where joints can open up. They’re sealed to tidy the line.
