Orkney Islands · Scotland
Remedial sealant & repairs in Toab, Orkney Islands
Removing failed, mouldy or leaking sealant and putting it right for Toab, backed by a 12-month guarantee. Call for a quick quote.
- Thick, messy sealant smeared over tiles
- A second bead peeling off the first
- Sealant that came away because the surface wasn’t prepared
Remedial sealant in Toab, done properly
Getting old sealant out properly is slow, careful work. Every layer is cut out, the residue cleaned off and the joint degreased, taking care not to scratch the surfaces around it. Only then can new sealant bond. Typical jobs include smears and lumps from a botched reseal and floor or wall movement joints that have failed, across shrunken worktop sealant, mouldy bath & shower sealant and leaking tray & enclosure joints.
Being further from a city doesn’t change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
Big or small, it’s backed by our one-year guarantee in Toab and across the Orkney Islands.
- Place
- Toab (KW17)
- Wider area
- Orkney Islands
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How it works
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for a typical bath or shower, longer where several layers have been applied. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
- Clear the area around the work
Ask for a quote
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we will take it from there.
Advice
Why act early in Toab
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why choose Mr Mastic in Toab
- Full insurance on every job
- We leave the area clean and tidy
- One-year guarantee on every job
- Old sealant always removed completely
FAQs for Toab
Can you do remedial sealant in Toab?
Yes, Toab is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
What guarantee comes with remedial sealant in Toab?
Every job comes with our 12-month guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.
Someone sealed over the old bead. Can you fix it?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can landlords and businesses book you?
Yes. Domestic, commercial and hotel work are all part of what we do, and we’re fully insured.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Landlord and commercial work in Toab
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Places near Toab
What else we do in Toab
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Bathrooms and kitchens in Toab
Toab is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In and around Toab, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Toab is about 5 miles south-east of Kirkwall, in the Orkney Islands. Our applicators cover remedial sealant for householders, landlords and businesses in Toab. Our area takes in 51 places across the Orkney Islands.
Jobs for remedial sealant in KW17 is quoted and booked the same way as anywhere else. You will find streets such as Liddie Road, Shore Road and Churchyard Road. Neighbouring places we cover for remedial sealant include Tankerness (1 mile north), Upper Sanday (2 miles south), St Mary's (4 miles south-west), Kirkwall (5 miles north-west) and Blackhill (6 miles north-west). Being one of the Orkney Islands’s larger places, Toab has homes, rented property and businesses of every kind. Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Local landmarks in Toab
A little further out are Graemeshall Museum (3.6 miles south-west) and Bishop's Palace (4.8 miles north-west). For a walk, there’s Gaitnip Hill and Loch of Tankerness.
Common problems we fix in Toab
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, cannot stretch, and tears at the first real movement. Backing sets the depth and stops that.
The most common problems we see are:
- Sealant applied over old sealant that has lifted
- Beads that never stuck properly
- Repeat leaks from the same joint
- Mould trapped under a layer of silicone
For an older house near a landmark such as St Andrew's Kirk, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What your quote should include
- How the joint is cleaned and prepared
- When the joint can take water or movement
- What happens if they find a problem under the old sealant
- Who turns up on the day
Quotes for remedial sealant in Toab
The price is agreed before any work begins. It’s based on:
- How many areas need sealing
- How easy the joints are to reach
- The size of the job
- Whether there’s mould to deal with
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Helping us quote
What to tell us when you ask for a quote:
- If it’s domestic, commercial or a hotel
- Where the job is, and your postcode
- The rough size of the job
- Pictures of the joints, sent by email
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.
What sealant work cannot fix
It helps to know what we cannot do:
- Older mastics that may need an asbestos check before removal
- Movement from fittings that aren’t supported
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think.
What we seal
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant