Kent · England

Remedial sealant & repairs in Bromley Green, Kent

Failed sealant joints in Bromley Green need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.

  • Decorators’ caulk around a bath or shower
  • Wide, uneven beads that look worse than the old ones
  • Beads that never stuck properly

Book remedial sealant in Bromley Green

Remedial sealant in Bromley Green, done properly

If a joint has been resealed and is leaking again, it’s worth a proper look. It helps to have photos when you ring 0345 464 0079 or drop us an email, along with when it was last resealed. If you have wide, uneven beads that look worse than the old ones and decorators’ caulk around a bath or shower, we can put it right, on expansion joints, leaking tray & enclosure joints and botched or over-sealed joints alike.

Somewhere as small as Bromley Green, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.

You’re covered for a year from the day we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.

Location
Bromley Green (TN26)
Wider area
Kent
Guarantee
A year, on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

Surface by surface

Windows & doors

Some leaks around windows come from the wall or the window itself. We check the joint and tell you if it looks to be something else.

Leaking trays & enclosures

Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. We check both before we reseal.

Leave it or put it right?

Stripping out botched sealant adds time to a reseal, but rarely a lot: it takes a few hours for most joints, depending on how much old sealant has to come out. Compared with chasing the same leak every few months, it’s time well spent. Older cottages and farmhouses around Bromley Green can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.

What you get with us

  • Colour picked to suit the job
  • 20+ years of sealant experience
  • You choose the colour before work begins
  • Approved under the ARBOMaster scheme

See our cost guide or what customers say.

Quotes for remedial sealant in Bromley Green

The price is agreed before any work begins. It’s based on:

  • How easy the joints are to reach
  • How much old sealant there is and how hard it is to remove
  • Any mould that needs treating
  • The product the joint needs

Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will explain what it covers.

Asking for a quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • Any previous sealing or DIY work
  • The address or postcode of the job
  • If it’s domestic, commercial or a hotel
  • Any access issues, like height or stairs

Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved before giving you a price.

What we are called out for in Bromley Green

Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, and the sealant lifts or goes mouldy from underneath.

Common reasons people contact us are:

  • Floor or wall movement joints that have failed
  • Sealant that came away because the surface wasn’t prepared
  • Kitchen joints letting water behind the worktop
  • Wide, uneven beads that look worse than the old ones

Schools such as John Wallis Academy are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Before you book anyone

  • Whether they’re fully insured
  • What guarantee comes with the work
  • Is the old sealant removed completely?
  • Which sealant they’ll use, and why

10 questions to ask before booking

What we cannot put right

To be straight with you, there are a few things sealant will not fix:

  • Plumbing leaks behind walls or under trays
  • Older mastics that may need an asbestos check before removal
  • Cracks in the fitting rather than the joint

If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before booking.

What we seal

  • Shrunken worktop sealant
  • Expansion joints
  • Mouldy bath & shower sealant
  • Failed movement joints
  • Botched or over-sealed joints
  • Leaking tray & enclosure joints

What remedial sealant looks like in Bromley Green

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

For landlords with property near Ham Street station, botched sealant from a previous quick fix is easier to strip out between tenants.

Bromley Green is about 3 miles south of Ashford, in Kent. For remedial sealant in and around Bromley Green, please call 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Kent. Our Kent coverage runs to 922 places, and Bromley Green is one of them. For nearby work, see our Crawley page (45 miles or so).

We cover every part of the TN26 postcode area for remedial sealant and the streets around it. We cover properties on Bromley Green Road, Ashford Road and Hamstreet Road. If you are just outside Bromley Green, we cover Orlestone (1 mile south), Stone Cross (2 miles east), Hamstreet (2 miles south), Ruckinge (3 miles south-east) and Kenardington (3 miles south-west). We also work in nearby towns such as Ashford (3 miles north), Folkestone (14 miles east), Faversham (15 miles north), Hythe (10 miles east), Davington (15 miles north) and Preston (15 miles north).

Around Bromley Green

For rail, the closest station is Ham Street station, roughly 1.9 miles south of the centre. Other landmarks nearby include Ashford Designer Outlet (3 miles north) and Woodchurch Village Life Museum (3.9 miles west). The countryside around Bromley Green includes Orlestone Forest.

Map of Bromley Green © OpenStreetMap contributors

Bromley Green: your questions answered

Is Bromley Green within the area you cover?

Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Do you cover Bromley Green for remedial sealant?

Yes, Bromley Green is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing.

Can old silicone be taken off without scratching the tiles?

Yes, with care. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. Any existing damage is pointed out before we start.

Can you quote for more than one area?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

Can you reseal a split movement joint?

Yes. Backing sets the depth and stops the sealant sticking to the back.

Is it messy?

Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.

How long should I leave it?

Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used before we leave.

What do you put in the joint?

We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.

How it works

There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours for most joints, depending on how much old sealant has to come out, including the tidy-up. For a village or hamlet like Bromley Green, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we work out whether the problem is the sealant, movement or a leak.
  2. Old beads and residue are removed down to clean surfaces.
  3. We treat any mould and dry the joint thoroughly.
  4. We reseal with a product suited to the joint, backed where needed.
  5. The joint is tooled and you are told about anything else we found.

Before we arrive

  • For indoor joints, keep the area dry beforehand if you can
  • Tell us if parking is tricky
  • Let us know about earlier repairs to the joints

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or email us.

Get a price

Read more

Looking after it afterwards

So the new joints stay in good condition:

  • Use a soft cloth, not a scourer, on silicone
  • Keep the room well ventilated
  • Report a tray that rocks or a worktop that lifts
  • Get the cause of a repeat leak found before resealing

Don’t let anyone seal over it later. Over-sealing is how many remedial jobs start.

Mould under a second layer of sealant keeps growing out of sight. When it finally shows, the whole bead needs to come out.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job