Kent · England
Ruckinge Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for Ruckinge, backed by a 12-month guarantee. Ask us for a quote.
- Mould trapped under a layer of silicone
- Over-sealed joints coming away
- Sealant peeling off a dusty or damp surface
Remedial sealant in Ruckinge
A joint that keeps failing normally has a reason. A tray that moves, a worktop that is not fixed, the wrong sealant or water getting in elsewhere will beat any new bead. Finding that cause comes before any new sealant. We work on shrunken worktop sealant, failed movement joints and mouldy bath & shower sealant, and common reasons people get in touch are mould trapped under a layer of silicone and over-sealed joints coming away.
Around Ruckinge, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Place
- Ruckinge (TN26)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
How the job changes by surface
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We work carefully to avoid adding to it, and point out any existing damage.
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. Once it’s all removed, the joint is treated so the new sealant starts clean.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
How we quote for remedial sealant
Jobs vary more than people expect. The main factors:
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- The size of the job
- Whether there’s mould to deal with
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Asking for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The type of property
- Whether it has been sealed before
- The problem you’ve noticed
- Where the job is, and your postcode
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or drop us an email.
Why deal with it now?
Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. By comparison, sorting the joint is quick. In a small place like Ruckinge, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
What you get with us
- Colour picked to suit the job
- White, clear, grey or another colour, product permitting
- We leave the area clean and tidy
- More than 20 years in sealant work
Read our cost guide or customer reviews.
The process
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours, depending on how many layers have to come out. Somewhere as small as Ruckinge, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Before we arrive
- Let us know about stairs, lifts or work at height
- Keep pets and children clear of the area while we work
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
To get a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Related advice
Common problems we fix in Ruckinge
Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
These are the problems we’re asked about most:
- Thick, messy sealant smeared over tiles
- A shower that leaks however often it’s resealed
- Torn expansion joints
- Products that weren’t meant for the joint
If you let a flat or house near Ham Street station, a joint that keeps failing is best fixed properly while the property is empty.
What to look for in a quote
- What preparation is included
- Are they insured?
- How much experience the applicator has
- The length of the guarantee
FAQs for Ruckinge
Do you cover smaller places like Ruckinge?
Yes. Ruckinge is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Ham Street station?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or email us with the details for a clear quote.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.
Can you work on commercial sites?
Yes. We have worked for hotels, offices and other businesses, and we are fully insured.
When is the sealant fully cured?
Cure times vary by product and the conditions. Before we leave, we will tell you the cure time.
Bathrooms and kitchens in Ruckinge
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of St Mary Magdalene, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Ruckinge is about 5 miles south of Ashford, in Kent. Anywhere in TN26, we can carry out remedial sealant at your property. Our Kent coverage runs to 922 places, Ruckinge among them. You can also see our page for Crawley, roughly 47 miles from Ruckinge.
Our applicators cover all of TN26 for remedial sealant. Whether your property is on Oak Ridge and Hamstreet Road or a nearby road, we can help. Nearby, we also carry out remedial sealant in Hamstreet (1 mile west), Stone Cross (2 miles north), Orlestone (2 miles north-west), Bromley Green (3 miles north-west) and Kenardington (3 miles west). We also work in nearby towns such as Ashford (5 miles north), Folkestone (12 miles east), Hythe (8 miles east), Hawkinge (12 miles east), Tenterden (9 miles west) and Cheriton (11 miles east).
Local landmarks in Ruckinge
The closest station to Ruckinge is Ham Street station, roughly 1.5 miles west. A little further out are William Harvey Hospital (5.3 miles north). Not far away are Orlestone Forest.
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Do not wait for a small gap to become a leak
- Have loose fittings fixed before resealing
- Keep movement joints clear of mortar and paint
- Run the fan after every shower
Where we’ve pointed out another fault, have it put right, or the new joint may fail again.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.