Kent · England
Remedial Sealant in Orlestone
Remedial sealant for Orlestone and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Over-sealed joints coming away
- Gaps opening along the back of the worktop
- Dark patches showing through the sealant
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Keep the room well ventilated
- Check ceilings under showers for marks
- Always have old sealant cut out, not covered
- Never fill a movement joint with mortar or grout
Where we have pointed out another fault, have it put right, because the new sealant cannot hold back a problem underneath.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
Remedial sealant in Orlestone, done properly
A joint that keeps letting you down needs more than another bead. Send pictures when you ring 0345 464 0079 or email us, along with when it was last resealed. We work on failed movement joints, shrunken worktop sealant and expansion joints, and common reasons people get in touch are mould trapped under a layer of silicone and floor or wall movement joints that have failed.
For a small place like Orlestone, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Big or small, it’s backed by our 12-month guarantee in Orlestone and across Kent.
- Where
- Orlestone (TN26)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Also near Orlestone
What else we do in Orlestone
Work for landlords, hotels and businesses
For anyone letting property in or around Orlestone, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Bathrooms and kitchens in Orlestone
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
If you let a flat or house near Ham Street station, botched sealant from a previous quick fix is easier to strip out between tenants. Homes close to Church of St Mary the Virgin include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you look after a building such as Hamstreet Primary Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Orlestone is about 4 miles south of Ashford, in Kent. Whether you’re in the middle of Orlestone or further out, we cover remedial sealant for every kind of property. We cover 922 towns and villages across Kent. You can also see our page for Crawley, roughly 45 miles from Orlestone.
Every address in TN26 is covered for remedial sealant. Neighbouring places we cover for remedial sealant include Hamstreet (1 mile south-east), Bromley Green (1 mile north), Kenardington (2 miles south-west), Ruckinge (2 miles south-east) and Stone Cross (2 miles north-east). We also work in nearby towns such as Ashford (4 miles north), Folkestone (14 miles east), Hythe (10 miles east), Hawkinge (14 miles east), Tenterden (7 miles west) and Cheriton (13 miles east).
What’s near Orlestone
In Orlestone, that means homes and buildings near The Dukes Head pub, among other places. The closest station to Orlestone is Ham Street station, roughly 0.7 miles south-east. Nearby you’ll also find Woodchurch Village Life Museum (3.6 miles west) and William Harvey Hospital (5.3 miles north-east). For a walk, there’s Orlestone Forest.
What happens on the day
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a few hours, depending on how many layers have to come out in most cases. Somewhere like Orlestone needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Mention any tricky access
- Let us know about earlier repairs to the joints
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or send us an email with the details, and pictures are welcome.
Read more
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
How the job changes by surface
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. It’s cut out, degreased and resealed.
Common questions in Orlestone
Can you do remedial sealant in Orlestone?
Yes. We work across London and the South East, and Orlestone is part of that. You can call 0345 464 0079 or email us and let us know what needs doing.
I let a flat near Ham Street station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
When is the sealant fully cured?
That depends on the sealant used, so follow the cure time we give you.
Can you match the sealant colour?
Generally, yes. White, clear and grey are common, and other colours are available, and we’ll agree it with you first.
Can you fix a reseal that hasn’t worked?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Can you do several jobs on one visit?
Yes. Just list everything you need and we will quote it together.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
When it isn’t the sealant
To be straight with you, there are a few things sealant will not fix:
- Failed tanking or loose tiles behind the sealant
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- A tray or worktop that needs refixing first
If you’re not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer.
What we seal
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
Why it’s worth doing now in Orlestone
DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. Older cottages and farmhouses around Orlestone can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What you get with us
- A sealant colour to suit the surroundings
- Homes, businesses and hotels
- Tidy, careful work
- One-year guarantee on every job
See our cost guide and customer reviews.