Kent · England
Bethersden Remedial Sealant
Specialist remedial sealant for Bethersden: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Movement joints that have split or pulled away
- Smears and lumps from a botched reseal
- Black mould underneath the bead
How we handle remedial sealant in Bethersden
Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. When the fault is elsewhere, we say so instead of resealing for the sake of it. If you’re dealing with over-sealed joints coming away and worktop sealant that has shrunk and split, we can put it right, on expansion joints, botched or over-sealed joints and shrunken worktop sealant alike.
For a small place like Bethersden, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Bethersden (TN26)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What we are called out for in Bethersden
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks, faster where ventilation is poor. At that point it has to come out.
The problems people normally mention when they call are:
- Kitchen joints letting water behind the worktop
- Sealant that came away because the surface wasn’t prepared
- Torn expansion joints
- A shower that leaks however often it’s resealed
Managing a site like Bethersden Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before you book anyone
- Which colour the sealant will be
- The length of the guarantee
- How the joint is cleaned and prepared
- How much experience the applicator has
Also near Bethersden
What else we do in Bethersden
Work for landlords, hotels and businesses
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
When something else is needed
Sealant is not the answer to every problem, and we’ll tell you before we start. Sealant will not put right:
- A cracked shower tray or bath (that needs repair or replacing)
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- A tray or worktop that needs refixing first
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Failed movement joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Expansion joints
How we quote for remedial sealant
Call for a quick quote. The main things that affect it are:
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
- The size of the job
- Access and height
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or send us an email and we’ll talk you through it.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- Pictures of the joints, sent by email
- The rough size of the job
- Where the job is, and your postcode
- Any previous sealing or DIY work
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
FAQs for Bethersden
I let a flat near Pluckley station. Can you help?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
Will you come out to Bethersden?
Yes, Bethersden is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area.
My shower still leaks after a reseal. Can you sort it?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, so we find that first.
Do you offer different sealant colours?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before work begins.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What happens if the problem is the tray or the plumbing?
Then we explain what we’ve found. A plumber or fitter may be needed before any new sealant goes on.
How long does remedial resealing take?
Longer than a simple reseal, because every layer has to come out. Most jobs take a few hours.
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes a few hours for a typical bath or shower, longer where several layers have been applied in most cases. In a small place like Bethersden, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
- Clear the area around the work
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or send us an email.
Read more
Remedial sealant in Bethersden: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Pluckley station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. In the older streets around Church of St Margaret, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Bethersden is about 5 miles west of Ashford, in Kent. From the centre of Bethersden to the outskirts, we cover remedial sealant for every kind of property, from flats and houses to offices and hotels. Bethersden is one of 922 towns and villages in Kent where we work for remedial sealant. We also work in Crawley, about 41 miles from Bethersden.
Jobs for remedial sealant in TN26 works the same way as everywhere else we cover. Remedial sealant is available to properties on The Dene, Forge Hill and Forgefield. Nearby, we also carry out remedial sealant in Wissenden (1 mile north-west), Further Quarter (2 miles west), Chambers' Green (2 miles north), Maltman's Hill (2 miles north-west) and High Halden (3 miles south-west). Larger places within reach include Maidstone (14 miles north-west), Ashford (5 miles east), Sittingbourne (15 miles north), Faversham (14 miles north-east), Hythe (15 miles east) and Davington (14 miles north-east).
Around Bethersden
Typical jobs here are in homes near The George Public House. Bethersden’s nearest station is Pluckley station, roughly 2 miles north of the centre. Well-known places in the area include Woodchurch Village Life Museum (3.1 miles south) and Romden Castle (2.4 miles north-west). For a walk, there’s Orlestone Forest.
What the job involves on each surface
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. We strip it, degrease the joint and reseal colour-matched to the worktop.
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is normally part of the cause. We will reseal and tell you if extraction looks to be the issue.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.