Kent · England
Remedial sealant & repairs in Fir Toll, Kent
Remedial sealant in Fir Toll from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Leaks that keep coming back after resealing
- Sealant applied over old sealant that has lifted
- Sealant peeling off a dusty or damp surface
Work for landlords, hotels and businesses
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
For anyone letting property in or around Fir Toll, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Remedial sealant in Fir Toll
In Fir Toll, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. We’re often asked to deal with decorators’ caulk around a bath or shower and smears and lumps from a botched reseal, across botched or over-sealed joints, shrunken worktop sealant and failed movement joints.
In a village or hamlet like Fir Toll, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
You are covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Place
- Fir Toll (TN27)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Other services in Fir Toll
Bathrooms and kitchens in Fir Toll
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Managing a site like Pluckley Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to Pluckley station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Fir Toll is about 5 miles west of Ashford, in Kent. We provide remedial sealant to homeowners, landlords and businesses in Fir Toll. Fir Toll is one of 922 places in Kent where we work for remedial sealant. There’s also a page for Crawley, about 41 miles away.
We cover every part of TN27 for remedial sealant. We also cover Pluckley Thorne (1 mile north-west), Pluckley (1 mile north), Chambers' Green (1 mile south), Little Chart (2 miles north-east) and Mundy Bois (2 miles north-west). Further out, we also cover Maidstone (12 miles north-west), Ashford (5 miles east), Sittingbourne (12 miles north), Faversham (12 miles north-east), Davington (12 miles north-east) and Foley Park (12 miles north-west).
What’s near Fir Toll
We work in homes and buildings around The Black Horse Inn. Fir Toll’s nearest station is Pluckley station, about 0.8 miles south of the centre. Other landmarks nearby include Romden Castle (2.3 miles south-west).
Questions from Fir Toll
Will you come out to Fir Toll?
Yes. Fir Toll is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Pluckley station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
Can you quote for more than one area?
Yes, we can. Several rooms, windows or areas can go on one quote.
How long does the work take?
That depends on how many layers there are and how many joints. You will have a timescale before any work begins.
Are you fully insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
Do you fix expansion and movement joints?
Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, then the joint is sealed properly.
When is the sealant fully cured?
Different products cure at different speeds, so follow the cure time we give you when we finish.
What does remedial sealant cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
How we quote for remedial sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Whether the work is at height
- How much old sealant there is and how hard it is to remove
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- Any previous sealing or DIY work
- Any access issues, like height or stairs
- A few pictures by email, if you can
- The rough size of the job
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or email us.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
Do you need remedial sealant in Fir Toll?
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
These are the problems we’re asked about most:
- Caulk or the wrong sealant used in a wet area
- Torn expansion joints
- Repeat leaks from the same joint
- Sealant that came away because the surface wasn’t prepared
Homes close to Church of St Nicholas include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What to look for in a quote
- What product goes in the joint
- What preparation is included
- How much experience the applicator has
- Whether they seal over old material or remove it
How the job changes by surface
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. We strip it, degrease the joint and reseal in a colour to suit.
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, including the screen profile and tray edges.
Honest limits
We will always be straight with you, so here’s what new sealant won’t do:
- Sealant in an older building that needs testing for asbestos first
- Water damage behind tiles that needs a tiler
- A tray or worktop that needs refixing first
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly.
Where we work in Fir Toll
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
- Failed movement joints
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes a few hours for most joints, depending on how much old sealant has to come out from start to finish. Somewhere like Fir Toll needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
How to prepare
- Tell us about any water getting in
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.