Kent · England
Remedial Sealant in Maltman's Hill
Our applicators work in Maltman's Hill on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Movement joints that have split or pulled away
- Repeat leaks from the same joint
- Worktop sealant that has shrunk and split
Remedial sealant for homes and businesses in Maltman's Hill
Remedial jobs in Maltman's Hill normally fall into a few patterns: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. We work on expansion joints, botched or over-sealed joints and leaking tray & enclosure joints, and the jobs we see most are torn expansion joints and mould trapped under a layer of silicone.
Homes around Maltman's Hill are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Every job is covered by a one-year guarantee, wherever you are in Kent.

- Location
- Maltman's Hill (TN27)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What sealant work can’t fix
In fairness, there are a few things sealant won’t fix:
- Failed tanking or loose tiles behind the sealant
- Older mastics that may need an asbestos check before removal
- A bath, tray or worktop that moves until it’s properly fixed
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Where we work in Maltman's Hill
- Failed movement joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Expansion joints
Nearby places to Maltman's Hill
Other services in Maltman's Hill
How the job changes by surface
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, matched to the frame colour.
Leaking trays & enclosures
Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. We check both before we reseal.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Questions from Maltman's Hill
I let a flat near Pluckley station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. You can ring 0345 464 0079 or email us with the details for a clear quote.
Is Maltman's Hill within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you remove old sealant without damaging the bath?
Yes. We take our time over removal, especially on acrylic, enamel and uPVC.
How long will it take to strip and reseal the joint?
That depends on how many layers there are and how many joints. You’ll have a timescale before any work begins.
Do you remove the old sealant?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
How do I get a quote for remedial sealant in Maltman's Hill?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we will talk you through it.
Where is Mr Mastic based?
We work from Crawley. Our applicators cover Maltman's Hill, along with the rest of our area.
What if resealing will not fix my leak?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.
Signs you need remedial sealant in Maltman's Hill
Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
Keep an eye out for any of the following:
- A second bead peeling off the first
- Gaps opening along the back of the worktop
- Wide, uneven beads that look worse than the old ones
- Floor or wall movement joints that have failed
In and around Maltman's Hill, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Questions to ask before booking
- Whether they seal over old material or remove it
- Whether VAT is included
- Whether the sealant suits the joint
- Which colour the sealant will be
Looking after it afterwards
After the cure time, these simple habits help:
- Run the fan after every shower
- Report a tray that rocks or a worktop that lifts
- Do not point over movement joints
- Deal with small splits early
Do not let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Early action keeps it to a sealant job.
Bathrooms and kitchens in Maltman's Hill
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to Pluckley station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Maltman's Hill is about 6 miles west of Ashford, in Kent. Maltman's Hill gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Maltman's Hill is one of 922 towns and villages in Kent where we work for remedial sealant. We also work in Crawley, about 39 miles from Maltman's Hill.
Postcode districts we cover here for remedial sealant: TN27. Close by, we work in Wissenden (1 mile south), Chambers' Green (1 mile east), Pluckley Thorne (2 miles north-east), Fir Toll (2 miles north-east) and Newland Green (2 miles north). Larger places within reach include Maidstone (11 miles north-west), Ashford (6 miles east), Sittingbourne (13 miles north), Faversham (13 miles north-east), Davington (13 miles north-east) and Foley Park (12 miles north-west).
Near you in Maltman's Hill
Maltman's Hill’s nearest station is Pluckley station, about 1.2 miles east of the centre. A little further out are Romden Castle (0.7 miles south-west).
How it works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many layers have to come out and we leave things clean and tidy. For a village or hamlet like Maltman's Hill, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Mention any tricky access
- For business premises, tell us about site rules or sign-in
Ask for a quote
We quote each job on its own. Just phone 0345 464 0079 or email us with the details.
