Highland · Scotland
Remedial Sealant in Aviemore
Removing failed, mouldy or leaking sealant and putting it right for householders, landlords and businesses in Aviemore. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- A shower that leaks however often it’s resealed
- Decorators’ caulk around a bath or shower
- Black mould underneath the bead
Keeping the joints in good condition
After the cure time, these simple habits help:
- Find out why the sealant failed first
- Act on a lifting corner straight away
- Check trays and worktops don’t move
- Air the bathroom so the sealant can dry
Where we’ve pointed out another fault, have it put right, or the new joint may fail again.
Do not keep resealing the same joint. Have someone find out why, or the next bead will go the same way.
About our remedial sealant in Aviemore
Water on the floor does not always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that’s what we find, we’ll tell you rather than reseal something that will not fix it. If you have mould trapped under a layer of silicone and sealant peeling off a dusty or damp surface, we can help, whatever the surface.
In and around a place like Aviemore, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Where
- Aviemore (PH22)
- Region
- Highland
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Bathrooms and kitchens in Aviemore
In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
Rented homes near Aviemore station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Aviemore is about 24 miles south-east of Inverness, in Highland. Whether you are in the middle of Aviemore or further out, remedial sealant is available for homes and businesses alike. Aviemore is one of 253 places in Highland we cover. We also work in Dundee, about 60 miles from Aviemore.
Jobs for remedial sealant in PH22 is quoted and booked the same way as anywhere else. We cover properties on Burnside Avenue, Craigellachie Crescent and Burnside Road and the roads around them. You’ll find Aviemore on the A9 and B970, so it’s easy for us to get to with everything needed for remedial sealant. If you’re just outside Aviemore, we cover Badenoch (1 mile south), Coylumbridge (2 miles south-east), Boat of Garten (4 miles north-east), Carrbridge (6 miles north) and Kincraig (6 miles south-west). Further out, we also cover Grantown-on-Spey (12 miles north-east), Kingussie (12 miles south-west) and Newtonmore (15 miles south-west). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
What’s near Aviemore
The nearest railway station is Aviemore station, about 0.8 miles south of the centre. Nearby you’ll also find Loch an Eilein Castle (3.5 miles south). Open spaces near Aviemore include Loch Pityoulish.
The process
Before we leave, we go over the finished joints with you. The visit itself generally takes a few hours, depending on how many layers have to come out, depending on how much there is to do. Around Aviemore, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we are working on
How to get a quote
We do not publish a price list. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.
Advice
Different surfaces, different methods
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, matched to the frame colour.
Mouldy bath & shower sealant
Mould often spreads under the bead as well as through it. We treat the exposed joint once the bead is out so the new sealant starts clean.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What happens if it’s left?
Remedial work takes longer than a straight reseal, but rarely a lot: the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Compared with chasing the same leak every few months, it’s time well spent. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in Aviemore
- 4.9 on Google from 180+ five-star reviews
- Sanitary silicone with an anti-fungal additive in wet areas
- Homes, businesses and hotels
- We never seal over old sealant
Aviemore questions
Is Aviemore within the area you cover?
Yes, we do. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Aviemore for remedial sealant?
Yes. We work across all of Scotland, and Aviemore is part of that. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we’ll send you a clear quote.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
Does remedial work come with a guarantee?
Yes. You get our 12-month guarantee.
When is the sealant fully cured?
That depends on the sealant used, so follow the cure time we give you.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do you need remedial sealant in Aviemore?
Joint depth matters. A bead bonded on three sides, or laid too thick, can’t flex, so it tears when the joint moves. Backing sets the depth and stops that.
People usually contact us when they notice something like this:
- Repeat leaks from the same joint
- Movement joints that have split or pulled away
- Beads that never stuck properly
- Decorators’ caulk around a bath or shower
Around Aviemore, as everywhere, remedial sealant is only as good as the preparation behind it.
Questions to ask before booking
- How hidden problems are handled
- Whether VAT is included
- What the cure time is
- What product goes in the joint
Also near Aviemore
More services for Aviemore
Honest limits
We will always be straight with you, so here’s what sealant cannot fix:
- Movement from fittings that aren’t supported
- A tray or bath that is cracked
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer before you book.
Where we work in Aviemore
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Expansion joints