Hampshire · England
Remedial sealant & repairs in Arford, Hampshire
Removing failed, mouldy or leaking sealant and putting it right in Arford, with a 12-month guarantee on every job. Call for a quick quote.
- Floor or wall movement joints that have failed
- Repeat leaks from the same joint
- Kitchen joints letting water behind the worktop
Remedial sealant in Arford
Remedial jobs in Arford usually fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. We work on shrunken worktop sealant, botched or over-sealed joints and expansion joints, and people most often call us about a shower that leaks however often it’s resealed and mould trapped under a layer of silicone.
Homes around Arford are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Arford (GU35)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need remedial sealant in Arford
Movement tears sealant that is not designed for it. Flexing baths, rocking trays and building movement joints will split a rigid or thin bead.
Any of these means the joints need attention:
- Decorators’ caulk around a bath or shower
- Beads that never stuck properly
- Wide, uneven beads that look worse than the old ones
- Black mould underneath the bead
For an older house near a landmark such as Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- How hidden problems are handled
- Which colour the sealant will be
- Who does the work, and how experienced they are
- Whether they’re fully insured
For landlords and businesses
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together.
Towns and villages near Arford
Also in Arford
Common questions in Arford
Do you cover Arford for remedial sealant?
Yes. We work across London and the South East, and Arford is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
I let a flat near Liphook station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and we will quote it together.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
How long does the work take?
A little longer than a standard reseal. Most jobs take a few hours.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours, and we’ll agree it with you first.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep the room well ventilated
- Act on a lifting corner straight away
- Check ceilings under showers for marks
- Use a soft cloth, not a scourer, on silicone
Leave the new joint to cure fully before it gets wet or moves: follow the cure time we give you.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
What remedial sealant looks like in Arford
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as The Holme Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Liphook station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.
Arford is about 6 miles south of Farnham, in Hampshire. Whether you’re in the middle of Arford or further out, remedial sealant is available for homes and businesses alike. Our Hampshire coverage runs to 683 places, Arford among them. We also work in Reading, about 24 miles from Arford.
Jobs for remedial sealant in GU35 works the same way as everywhere else we cover. Whether your property is on Beech Hill Road, Arford Common and Headley Hill Road or anywhere close by, we can help. If you’re just outside Arford, we cover Headley (1 mile south-west), Headley Down (1 mile east), Lindford (1 mile west), Standford (1 mile south-west) and Wishanger Common (2 miles north). Larger places within reach include Farnborough (12 miles north), Fleet (11 miles north), Aldershot (9 miles north), Alton (7 miles west), Petersfield (10 miles south-west) and Yateley (15 miles north).
What’s near Arford
We work in homes and buildings around The Holly Bush Inn and Mill Chase Academy and the streets around them. The nearest railway station is Liphook station, about 3.6 miles south of the centre. Well-known places in the area include Chase Community Hospital (2.3 miles south-west). Not far away are Deadwater Valley and Gibbet Hill.
How it works
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours, depending on how many layers have to come out. For a village or hamlet like Arford, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
How to get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
Why deal with it now?
Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours, depending on how many layers have to come out. Compared with chasing the same leak every few months, it’s time well spent. In a small place like Arford, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Why book with us
- More than 20 years in sealant work
- Arbo and Everbuild products
- We never seal over old sealant
- Rated 4.9 stars on Google
See our cost guide and our reviews.
When it is not the sealant
We will not take on work that won’t last, so these are the limits:
- Sealant in an older building that needs testing for asbestos first
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Movement from fittings that aren’t supported
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Where we work in Arford
- Leaking tray & enclosure joints
- Failed movement joints
- Expansion joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Botched or over-sealed joints