Hampshire · England
Bathroom & kitchen resealing in Arford, Hampshire
Bathroom resealing for Arford and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- A messy, uneven bead from a previous reseal
- Water getting behind the bath panel
- Black mould in the silicone that will not clean off
Bathroom resealing in Arford, done properly
Homes in Arford have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We work on shower trays & enclosures, baths and sinks & splashbacks, and the jobs we see most are lumpy, uneven sealant from a DIY attempt and mouldy sealant that has gone black.
Around Arford, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
All our work is covered by a 12-month guarantee.
- Location
- Arford (GU35)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the quote in Arford
The quote reflects the job in front of us. We look at:
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
- Access and height
- The amount of work
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or email us and we will give you an honest view and a quote.
Helping us quote
To make quoting easier, please include:
- What the problem is, such as mould, gaps, leaks or cracking
- A few pictures by email, if you can
- The rough size of the job
- The type of property
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
Do you need bathroom resealing in Arford?
Baths and trays move. An acrylic bath flexes under load, and a tray that is not fully bedded can rock. Over time the joint tears or pulls away from the tile.
It’s worth asking for a quote if you see:
- A reseal done over the top of the old bead
- Mouldy sealant that has gone black
- Smears of silicone across the tiles
- Cracked, shrunken or lifting silicone
Rented homes near Liphook station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Questions to ask before booking
- How long to leave it before use
- What product goes in the joint
- What the quote includes, VAT included or not
- How the joint is cleaned and prepared
What we cannot put right
We won’t take on work that will not last, so these are the limits:
- A tray that rocks until it’s re-bedded
- Failed grout lines across the wall
- Water coming from the plumbing rather than the joint
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
What we seal
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
- Baths
- Kitchen worktops & upstands
Arford homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Managing a site like The Holme Church of England Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes. In the older streets around Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Arford is about 6 miles south of Farnham, in Hampshire. Arford gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our Hampshire coverage runs to 683 places, Arford among them. Reading is on our list too, about 24 miles from Arford.
All of GU35 is within our area for bathroom resealing, from the main roads to the quietest streets. Whether your property is on Beech Hill Road, Arford Common and Headley Hill Road or anywhere close by, we can help. We also cover Headley (1 mile south-west), Headley Down (1 mile east), Lindford (1 mile west), Standford (1 mile south-west) and Wishanger Common (2 miles north). Further out, we also cover Farnborough (12 miles north), Fleet (11 miles north), Aldershot (9 miles north), Alton (7 miles west), Petersfield (10 miles south-west) and Yateley (15 miles north).
What’s near Arford
Typical jobs here are in homes near The Holly Bush Inn and Mill Chase Academy, among other places. The nearest railway station is Liphook station, about 3.6 miles south. A little further out are Chase Community Hospital (2.3 miles south-west). For a walk, there’s Deadwater Valley and Gibbet Hill.
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
How it works
Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a couple of hours for a single bath or shower. Somewhere as small as Arford, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Keep children and pets away from the work area
- Mention any leaks or damp you’ve noticed
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Advice
What happens if it’s left?
Dealing with sealant early is a short job: the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Around Arford, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why choose Mr Mastic in Arford
- Tidy, careful work
- Domestic, commercial and hotel work
- One-year guarantee on every job
- Colour agreed with you before we start
See how sealant jobs are priced and our reviews.
Common questions in Arford
Can you help a landlord with a rental near Liphook station?
Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Arford?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you guarantee your resealing?
Yes, a one-year guarantee. Good ventilation and gentle cleaning help it last.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Are you fully insured?
Yes, we are fully insured for every job we do.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
How long does the new silicone need before I use the shower?
After around 24 hours in most cases. You’ll get the exact cure time before we leave.
Can you get rid of the black mould in my sealant?
Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Nearby places to Arford
More services for Arford
What the job involves on each surface
Sinks & splashbacks
The edge of an inset sink is a common place for water to get under the worktop. Where the sealant around the visible edge has failed, we renew it.
Shower trays & enclosures
A tray that rocks will split any sealant. We check for movement before we reseal, and tell you if it needs re-bedding first.