Hampshire · England
Floor & skirting joints in Arford, Hampshire
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Arford, backed by a 12-month guarantee. Ask us for a quote.
- Gaps opening between the floor and skirting
- Tiled floors with no room to move
- Gaps between floors and kitchen plinths
Floor joint sealing in Arford: local notes
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
If you look after a church, hall or community building such as Church of All Saints, joints in its floors, skirtings and thresholds need resealing as they wear. Letting a property close to Liphook station? Then open skirting and floor joints collect dirt and water, so seal them while the property is empty. Managing a site like The Holme Church of England Primary School? Then entrance and corridor floor joints take a lot of traffic.
Arford is about 6 miles south of Farnham, in Hampshire. Every kind of property in Arford is covered for floor joint sealing. The work is guaranteed for a year. Across Hampshire, we cover 683 places, and Arford is one of them. For nearby work, see our Reading page.
Postcode districts we cover here for floor joint sealing: GU35. If you need floor joint sealing at a property on Beech Hill Road, Arford Common and Headley Hill Road or anywhere close by, our applicators can take on the job. We also cover the places around Arford: Headley (1 mile south-west), Headley Down (1 mile east), Lindford (1 mile west), Standford (1 mile south-west) and Wishanger Common (2 miles north). Further out, we also cover Farnborough (12 miles north), Fleet (11 miles north), Aldershot (9 miles north), Alton (7 miles west), Petersfield (10 miles south-west) and Yateley (15 miles north).
Near you in Arford
Locally, jobs take us to homes and businesses close to The Holly Bush Inn and Mill Chase Academy, among other places. For rail, the closest station is Liphook station, about 3.6 miles south. Well-known places in the area include Chase Community Hospital (2.3 miles south-west). Not far away are Deadwater Valley and Gibbet Hill.
Floor joint sealing in Arford
We seal floor joints in homes, offices and commercial buildings across Arford. We start by checking the floor type and the joint, since that decides which sealant suits. Common call-outs are for failed joint filler in concrete floors and gaps between floors and kitchen plinths, on thresholds, commercial floors and wet room & bathroom floors.
Older homes in small places like Arford often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Arford (GU35)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Thresholds
Thresholds take daily traffic, so we choose a hard-wearing, flexible product.
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. We reseal them with a sealant suited to wet areas.
What affects the cost of floor joint sealing
You will get a clear quote before any work starts. It’s based on:
- How many rooms, windows or areas are involved
- The amount of work
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- How we’d reach the joints
- Where the job is, and your postcode
- Photos by email, if that is easy
- The rough size of the job
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. Whenever you are ready, ring 0345 464 0079 or email us.
Towns and villages near Arford
What else we do in Arford
Questions from Arford
Is Arford within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Liphook station. Can you help?
Yes. We work for landlords and agents as well as homeowners. Just call 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
How soon can the floor be mopped?
Follow the cure time we give you. Feet are generally fine first, then mopping, then heavy wheels, depending on the product.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Do I need to be at home?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Can you seal where the floor meets the bath panel?
Yes. These joints get wet every time the floor is cleaned, so a flexible silicone is the right choice.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Landlords, agents and businesses in Arford
For anyone letting property in or around Arford, several properties can be quoted together. Send us the addresses and the work at each.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What happens on the day
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for most rooms, longer for large commercial floors. Somewhere as small as Arford, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We clear the edges of the floor so the joints are easy to reach.
- We take out the cracked caulk, grout or old sealant.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied.
- Finally, we check the work and talk you through aftercare.
Before we arrive
- Try not to wet indoor joints just before the visit
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Related advice
Keeping the joints in good condition
After the cure time, these simple habits help:
- Use furniture pads near skirting
- Act on grout cracks that run in a straight line
- Cone off fresh joints until they’re ready
- Check the sealant is paintable before decorating
Avoid flooding the floor when you clean. Keeping the edges drier helps the sealant last longer.
In wet areas, an open floor joint lets water reach the subfloor. A sound seal stops that happening.
Should I try it myself first?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Leave it or put it right?
Left open, concrete joints break down under traffic. Resealing it early protects the edges. Around Arford, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why choose Mr Mastic in Arford
- We’re fully insured
- Sanitary silicone with an anti-fungal additive in wet areas
- We never seal over old sealant
- 180+ five-star Google reviews