Glasgow · Scotland
Remedial sealant & repairs in Anniesland, Glasgow
Remedial sealant across Anniesland and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Smears and lumps from a botched reseal
- Leaks that keep coming back after resealing
- Mould trapped under a layer of silicone
How we handle remedial sealant in Anniesland
A movement joint stops working when its sealant splits or sets hard. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. If you have thick, messy sealant smeared over tiles and a shower that leaks however often it’s resealed, we can help.
In Scotland’s cities, including the area around Anniesland, many older flats had their bathrooms added into small rooms later on. Rooms like that are often small and slow to dry out, and steam with nowhere to go is what turns sealant black and grout grey.
Your job is guaranteed for a year, as with all our work.
- Place
- Anniesland (G13, G12, G14)
- Wider area
- Glasgow
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
When something else is needed
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Movement from fittings that are not supported
- Failed tanking or loose tiles behind the sealant
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer before booking.
Where we work in Anniesland
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
Anniesland questions
Do you work for landlords with property near Anniesland station?
Yes, landlords and agents are among the people we work for. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
Can a failed shower seal in a tenement flat in Anniesland leak into the flat below?
Yes. With flats above and below, a leak from a failed seal rarely stays in one flat. Cutting out the old sealant and laying a fresh bead puts a stop to it.
What if resealing will not fix my leak?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.
Do you work in Anniesland?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
Do you fix expansion and movement joints?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, then the joint is sealed properly.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
My shower still leaks after a reseal. Can you sort it?
Yes. Repeat leaks normally come from over-sealing, movement or water getting in elsewhere, and we deal with the cause first.
Bathrooms and kitchens in Anniesland
Anniesland has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Sandstone tenements are a big part of Glasgow’s housing, so many bathrooms sit right above a neighbour’s ceiling.
If you live in an older home near Jordanhill Parish Church, older homes can move a little, which is hard on rigid grout and tired sealant. If you look after a building such as Knightswood Secondary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Anniesland is about 2 miles south of Bearsden, in Glasgow. Whether you’re in the middle of Anniesland or further out, we cover remedial sealant for every kind of property. Our area takes in 183 places across Glasgow, from the larger towns to small villages.
Our applicators cover all of the G13, G12 and G14 postcode area for remedial sealant and the streets around it. We cover properties on Crow Road, Fern Lane and Ryvra Road and the roads around them. You will find Anniesland on the A82, which makes it straightforward to reach. Neighbouring places we cover for remedial sealant include Anniesland Cross (1 mile east), Temple (1 mile north-east), Knightswood (1 mile north-west), Netherton (1 mile north) and Jordanhill (1 mile south-west). Larger places within reach include Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south-east).
Around Anniesland
We work in homes and buildings around The Esquire House, Scotstoun Primary School and Victoria Park, among other places. Anniesland has its own railway station: Anniesland station. Other landmarks nearby include Braehead (1.6 miles south-west) and Glasgow Museum of Transport (2 miles south-east). Green spaces nearby include Castle Hill and Kilmardinny.
How we quote for remedial sealant
There’s no set price list, because no two jobs are the same. The quote depends on:
- Whether old sealant or filler has to be cut out
- When we can work, for business premises
- The number of rooms or windows
- Whether the work is at height
What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Helping us quote
To help us quote quickly, let us know:
- How many joints, rooms or windows are involved
- How we’d reach the joints
- Where the property is
- Any previous sealing or DIY work
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
How it works
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for most joints, depending on how much old sealant has to come out. In a city area like Anniesland, parking may be by permit or pay-and-display, so tell us what’s nearby. If you’re in a flat, let us know how we get in at the street door.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
Getting ready for the visit
- Keep children and pets away from the work area
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
Ask for a quote
We quote each job on its own, so start by telling us what you need. Just drop us a line at info@mrmastic.co.uk with the details.
Read more
Signs you need remedial sealant in Anniesland
Using the wrong product is a common cause: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
Look out for these signs:
- Decorators’ caulk around a bath or shower
- Floor or wall movement joints that have failed
- Over-sealed joints coming away
- Smears and lumps from a botched reseal
For landlords with property near Anniesland station, a joint that keeps failing is best fixed properly while the property is empty.
Before booking anyone
- Whether the sealant suits the joint
- Whether they’re fully insured
- Which colour the sealant will be
- Whether they seal over old material or remove it
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Report a tray that rocks or a worktop that lifts
- Never fill a movement joint with mortar or grout
- Keep the room well ventilated
- Always have old sealant cut out, not covered
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.
DIY sealant or a professional job?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.