Isle of Wight · England
Remedial sealant & repairs in Alverstone Garden Village, Isle of Wight
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Alverstone Garden Village and across the Isle of Wight. Fully insured, ARBOMaster approved and guaranteed for a year.
- Movement joints that have split or pulled away
- Leaks that keep coming back after resealing
- Products that weren’t meant for the joint
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Use a soft cloth, not a scourer, on silicone
- Keep movement joints clear of mortar and paint
- Don’t add new sealant on top of old
- Run the fan after every shower
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
How we handle remedial sealant in Alverstone Garden Village
The wrong product in the wrong joint will not last, however tidy it looks. Out it comes, and in goes a sealant suited to the job. We work on failed movement joints, shrunken worktop sealant and botched or over-sealed joints, and the jobs we see most are sealant peeling off a dusty or damp surface and thick, messy sealant smeared over tiles.
In a village or hamlet like Alverstone Garden Village, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Whatever the size of the job, it’s backed by our one-year guarantee in Alverstone Garden Village and across the Isle of Wight.
- Where
- Alverstone Garden Village (PO36)
- Region
- Isle of Wight
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What we’re called out for in Alverstone Garden Village
Sealant needs a clean, dry surface with no grease on it. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.
The most common problems we see are:
- Sealant peeling off a dusty or damp surface
- Worktop sealant that has shrunk and split
- Torn expansion joints
- Leaks that keep coming back after resealing
In the older streets around All Saints' Church, walls and floors in older homes can move, and sealant and grout show it first.
What to look for in a quote
- When the joint can take water or movement
- What happens if they find a problem under the old sealant
- Is VAT in the price?
- What product goes in the joint
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
How the job changes by surface
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning.
Movement & expansion joints
A sealant stuck to the back of the joint cannot stretch. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Why deal with it now?
Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Where a wall is exposed, as many are in small places like Alverstone Garden Village, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Why book with us
- A choice of colours where the product allows
- Any old sealant cut out fully, not covered over
- Anti-fungal sanitary silicone in wet areas
- Full insurance on every job
See our cost guide or customer reviews.
Alverstone Garden Village homes and their sealant
Alverstone Garden Village is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Rented homes near Sandown station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. If you look after a building such as Newchurch Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Alverstone Garden Village is about 4 miles south of Ryde, in the Isle of Wight. Alverstone Garden Village gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Alverstone Garden Village is one of 125 places in the Isle of Wight where we work. You can also see our page for Portsmouth, about 11 miles away.
Jobs for remedial sealant in PO36 is quoted and booked the same way as anywhere else. Local streets include Youngwoods Way, Youngwoods Copse and Hollowood Road, and we cover them all. Close by, we work in Alverstone (1 mile south-east), Queen's Bower (1 mile south-west), Skinner's Hill (1 mile south-west), Adgestone (1 mile north-east) and Lake (1 mile south-east). Further out, we also cover Newport (5 miles north-west), Ryde (4 miles north), Cowes (8 miles north-west), Ventnor (5 miles south), East Cowes (7 miles north-west) and Oakfield (4 miles north). For island and remote addresses, the job takes a little more planning.
Local landmarks in Alverstone Garden Village
Typical jobs here are in homes near The Pointer Inn, Sandown Bay Academy and The Bay Church of England School and the streets around them. The nearest railway station is Sandown station, roughly 1.3 miles south-east of the centre. Well-known places in the area include Wight Aviation Museum (0.9 miles south) and Arthur Webster Memorial Hospital for Children (2.1 miles south). Green spaces nearby include Alverstone Mead and Brading Down.
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Alverstone Garden Village and across the Isle of Wight. We can quote a run of properties together.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
What we do, step by step
All our tools and materials come with us in the van. Once we’ve agreed what’s being done, we protect the area and start. It normally takes a few hours, depending on how many layers have to come out. In a small place like Alverstone Garden Village, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Mention any leaks or damp you’ve noticed
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work and give you a clear price.
Advice
Also near Alverstone Garden Village
More services for Alverstone Garden Village
Alverstone Garden Village: your questions answered
I let a flat near Sandown station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Alverstone Garden Village?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
Can you strip sealant from an acrylic tray safely?
Yes. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. Any existing damage is pointed out before we start.
Do you fix expansion and movement joints?
Yes. Backing sets the depth and stops the sealant sticking to the back.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.