Highland · Scotland

Remedial Sealant in Altnaharra

Remedial sealant in Altnaharra from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Leaks that keep coming back after resealing
  • Floor or wall movement joints that have failed
  • Black mould underneath the bead

Book remedial sealant in Altnaharra

Remedial sealant around Altnaharra

Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.

Around Altnaharra, as everywhere, remedial sealant is only as good as the preparation behind it. Whether the job is in Altnaharra itself or nearby, the right material for each joint matters as much as a neat finish.

Altnaharra is about 39 miles south-west of Thurso, in Highland. We carry out remedial sealant for homes and businesses in Altnaharra and the surrounding area, as part of our work across Highland. Altnaharra is one of 253 towns and villages in Highland where we work.

We work across the IV27 postcode area for remedial sealant. We also cover the places around Altnaharra: Tongue (13 miles north), Melness (17 miles north), An Luirg (18 miles south), Am Blàran Odhar (19 miles north-east) and Innis nan Lìon (21 miles south). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.

Near you in Altnaharra

Green spaces nearby include Loch Eileanach and Meall an Fhuarain.

Map of Altnaharra © OpenStreetMap contributors

About our remedial sealant in Altnaharra

Movement and expansion joints fail when the sealant can’t stretch. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. If you have wide, uneven beads that look worse than the old ones and kitchen joints letting water behind the worktop, we can put it right.

Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.

Big or small, you get the same one-year guarantee in Altnaharra and across Highland.

Place
Altnaharra (IV27)
Wider area
Highland
Cover
One year on every job
Quote
A clear price before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

What sealant work cannot fix

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • Movement from fittings that aren’t supported

Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before you book.

Joints and surfaces we work on

  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints
  • Botched or over-sealed joints
  • Failed movement joints
  • Expansion joints

Work for landlords, hotels and businesses

Housing providers, facilities teams and property managers book us too in Altnaharra and across Highland. Several sites can go on one quote, and we are fully insured.

For anyone letting property in or around Altnaharra, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.

Why deal with it now?

Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours for most joints, depending on how much old sealant has to come out. It’s far less disruption than resealing the same joint again and again. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

Why us?

  • White, clear, grey or another colour, product permitting
  • We agree the colour with you first
  • More than 20 years in sealant work
  • ARBOMaster approved applicator

Read how sealant jobs are priced or what customers say.

Your questions about remedial sealant in Altnaharra

Is remedial sealant in Altnaharra guaranteed?

Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.

Can you do remedial sealant in Altnaharra?

Yes. We work across all of Scotland, and Altnaharra is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.

Will it make a mess?

No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.

Where are you based?

We work from Crawley. We cover Altnaharra and the rest of Highland, along with the rest of our area.

Can you work on commercial sites?

Yes. Larger jobs can be planned room by room or area by area.

Do you work for letting agents?

Yes. Domestic, commercial and hotel work are all part of what we do, and we are fully insured.

How do I get a quote for remedial sealant in Altnaharra?

There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.

Are you ARBOMaster approved?

Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.

What happens on the day

We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours, depending on how many layers have to come out. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

Preparing for the visit

  • Mention if the joints have been sealed before
  • Mention any sign-in or site rules at work premises
  • Plan for the work area to be out of bounds to pets and children

Ask for a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.

Get a price

Related advice

What affects the cost of remedial sealant

Call for a quick quote. The main things that affect it are:

  • Any working-time requirements on site
  • The number of rooms or windows
  • How much there is to do
  • How much old sealant there is and how hard it is to remove

What you pay reflects the work, not a rough estimate. That’s why we ask about the job first.

Helping us quote

Before you ask for a quote, have a think about:

  • Any access issues, like height or stairs
  • What the problem is, such as mould, gaps, leaks or cracking
  • A few photos by email, if you can
  • The address or postcode of the job

Want a quote for remedial sealant? Please drop us a line at info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and send you a clear quote before we start.

How the job changes by surface

Windows & doors

Failed frame mastic is often hard, cracked and in several layers. We remove it all and clean back to sound surfaces before backing and resealing.

Over-sealed & botched joints

A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.

Can I do it myself?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job