Highland · Scotland
An Luirg Remedial Sealant
Remedial sealant for An Luirg and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Sealant that came away because the surface wasn’t prepared
- Leaks that keep coming back after resealing
- Black mould underneath the bead
Remedial sealant in An Luirg, done properly
Two decades of sealant work means we recognise most failures quickly. We’re fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. We work on mouldy bath & shower sealant, expansion joints and botched or over-sealed joints, and common reasons people get in touch are mould trapped under a layer of silicone and wide, uneven beads that look worse than the old ones.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- An Luirg (IV27)
- Region
- Highland
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What affects the cost of remedial sealant
Every job gets its own quote. This is what makes a difference:
- Mould in or behind the old joints
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- The number and length of the joints
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
- If someone has resealed it before
- Access, such as stairs, a lift or height
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, send an email to info@mrmastic.co.uk.
Your questions about remedial sealant in An Luirg
Can you help a landlord with a rental near Lairg station?
Yes, we work for landlords and agents. Just email us at info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Will you come out to An Luirg?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Where do you work from?
We are a Crawley-based firm. We work across South East England, London and Scotland.
Can you strip sealant from an acrylic tray safely?
Yes. The old bead is cut and lifted with tools that suit the surface, then clean off the residue. We point out any damage that’s already there.
What happens if the problem is the tray or the plumbing?
We check for that before we reseal. If we find the leak is elsewhere, we tell you before going further.
Do you guarantee remedial jobs?
Yes. Remedial work carries the same 12-month guarantee as all our work.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
Aftercare tips
After the cure time, these simple habits help:
- Do not point over movement joints
- Find out why the sealant failed first
- Keep bleach and abrasives off the bead
- Have loose fittings fixed before resealing
If we have found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.
How it works
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours for most joints, depending on how much old sealant has to come out. Outside jobs in An Luirg need a dry day, because sealant won’t bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- On commercial sites, let us know about site rules
- Keep pets and children clear of the area while we work
How to get a quote
Asking for a quote is easy: let us know what needs doing and where. A few pictures by email make the job easier to understand.
Read more
Places near An Luirg
More services for An Luirg
DIY versus a professional finish
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How the job changes by surface
Mouldy bath & shower sealant
Mould that has grown into silicone does not clean out for good. All of it comes out, and the joint is treated and dried ahead of a new anti-fungal bead.
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We take care not to make it worse, and tell you about any damage we find.
What happens if it’s left?
Adding more sealant is the usual quick fix, and it rarely works. It does not grip the old layer, leaving the leak in place and one more layer to cut out later. In an older home around An Luirg, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- A sealant colour to suit the surroundings
- Tidy, careful work
- White, clear, grey or coloured to suit, where the product allows
When to call us in An Luirg
One of the commonest remedial jobs is sealant on top of sealant. Silicone doesn’t bond to silicone, so the new layer peels, and damp and mould settle between them.
The problems people generally mention when they call include:
- Products that weren’t meant for the joint
- Repeat leaks from the same joint
- A second bead peeling off the first
- Smears and lumps from a botched reseal
Around An Luirg, as everywhere, remedial sealant is only as good as the preparation behind it.
What to look for in a quote
- How long to leave it before use
- Is the old sealant removed completely?
- The length of the guarantee
- What insurance they hold
Remedial sealant around An Luirg
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Letting a property close to Lairg station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
An Luirg (Gaelic: Lairg) is about 36 miles north-west of Nairn, in Highland. Across the IV27 area, our applicators can take on remedial sealant. An Luirg is one of 253 places in Highland we cover for remedial sealant.
Every address in IV27 is within our area for remedial sealant. We cover properties on Main Street, Rathad Cnoc na H-Eaglais and Milnclarin Way. Other places close to An Luirg include Innis nan Lìon (8 miles west), Bonar Bridge (9 miles south), Lower Gledfield (10 miles south), Ardgay (10 miles south) and Spinningdale (12 miles south-east). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.
Local landmarks in An Luirg
An Luirg’s nearest station is Lairg station, roughly 1.6 miles south. Green spaces nearby include Loch Dola and The Ord.