Hampshire · England
Regrouting in Sway
Regrouting across Sway and nearby, with every bit of old sealant taken out first.
- Stained grout that cleaning won’t shift
- Shower grout that has worn away
- Cracked grout along the bath or tray
How we handle regrouting in Sway
We check the tiles before any grout comes out. Loose or hollow tiles are pointed out first, since new grout cannot fix a problem underneath. Where the tiles are sound, regrouting gives the area a new lease of life. If you are dealing with kitchen splashback grout stained by grease and old grout in a dated colour, we can put it right, whatever the surface.
Around Sway, you will mostly find houses and bungalows, from older cottages to newer builds. Sealant and grout wear out here just as they do in a big town.
Your job is guaranteed for a year, as with all our work.
- Where
- Sway (SO41)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026

Regrouting in Sway: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near St Luke's Church, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as St Luke's Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Sway is about 3 miles north-west of Lymington, in Hampshire. Whether you are in the middle of Sway or further out, regrouting is available for homes and businesses alike. Across Hampshire, we cover 683 places, and Sway is one of them. We also work in Southampton, about 13 miles from Sway.
We cover every part of SO41 for regrouting and the streets around it. Regrouting is available to properties on Station Road, Anderwood Drive and Cruse Close and the roads around them. Other places close to Sway include Mead End (1 mile west), Tiptoe (1 mile south-west), Hordle (2 miles south), Ashley (2 miles south-west) and Bashley (2 miles west). Larger places within reach include Totton (10 miles north-east), Lymington (3 miles south-east), Romsey (15 miles north), Hythe (10 miles north-east), New Milton (3 miles south-west) and Ringwood (9 miles north-west).
Local landmarks in Sway
We work in homes and buildings around Forest Heath Hotel. There’s a railway station in Sway itself: Sway station. A little further out are Lymington New Forest Hospital (2.9 miles south-east) and Sammy Miller Motorcycle Museum (3.3 miles south-west). Not far away are Milford on Sea LNR.
Landlord and commercial work in Sway
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Your questions about regrouting in Sway
Is Sway in your area for regrouting?
Yes. We work across London and the South East, and Sway is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing.
Will you come out to Sway?
Yes, Sway is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator.
Is the work guaranteed?
There’s a 12-month guarantee on every job, including regrouting.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected.
How do I get a quote for regrouting in Sway?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before we start.
Can you quote for more than one area?
Yes, we can. More than one area can be quoted together.
How the visit works
At the end, we look at the finished work together and explain the cure time. The work normally takes anything from a few hours to a full day, depending on the area, depending on the amount of work. Parking around Sway is usually easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Preparing for the visit
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
- Tell us about any previous sealing or DIY attempts
Getting a quote
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Leave it or put it right?
If tiles are loose, regrouting alone isn’t the answer. We will tell you before any work starts, so you can decide what to do. Where the tiles are sound, regrouting is far less disruptive than retiling. Homes in smaller places like Sway can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Call for a quick quote and we’ll explain what it covers.
Why choose Mr Mastic in Sway
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
- Approved under the ARBOMaster scheme
- Experience in homes, commercial sites and hotels
Read what affects the cost and our reviews.
Aftercare tips
A little care helps the new joints last. We recommend:
- Open a window or run the fan to clear steam
- Skip wire brushes and scourers
- Use a squeegee on the tiles after showering
- Don’t ignore a tile that feels loose
Have any tile that moves checked right away. Movement will crack the new grout and lets water in.
Tiles can come away if failed grout is left. By then, new grout alone isn’t enough so early action pays.
What affects the quote in Sway
The price is agreed before any work begins. It takes into account:
- Any mould that needs treating
- The number of rooms or windows
- The type of sealant required
- How much old sealant there is and how hard it is to remove
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
What to tell us for a quote
When you contact us, it’s useful to know:
- A few photos by email, if you can
- Whether it’s a home or a business
- The rough size of the job
- Access, such as stairs, a lift or height
For regrouting in Sway, phone 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Other services in Sway
Signs you need regrouting in Sway
Soap scum and limescale build up on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.
People generally contact us after spotting something like this:
- Dirty, worn grout on a tiled floor
- Grout washed out of a shower
- Good tiles let down by tired grout
- Grout in a colour the owner wants to change
Letting a property close to Sway station? Then stained grout drags a rental down, and regrouting between lets puts that right.
What to look for in a quote
- Whether they seal over old material or remove it
- How the joint is cleaned and prepared
- What product goes in the joint
- Who does the work, and how experienced they are
