Scottish Borders · Scotland
Regrouting in Newmill, Scottish Borders
Regrouting across Newmill and nearby, with old sealant always removed completely.
- Grout that makes sound tiles look old
- Cracked grout along the bath or tray
- Grout stained black or orange that won’t clean
When something else is needed
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Failed tanking or waterproofing under the tiles
- Loose tiles, which need refixing first
- Cracked or broken tiles
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Joints and surfaces we work on
- Bathroom wall tiles
- Bathroom floors
- Shower walls
- Kitchen splashbacks
- Tiled floors
- Wet rooms
Regrouting in Newmill
Most regrouting jobs include resealing too. Grout is for the joints between tiles, but corners and edges move, so they need flexible silicone instead. Doing both at once leaves the whole area sound. If you are dealing with old grout in a dated colour and cracked or crumbling grout lines, we can put it right, whatever the surface.
For a place like Newmill, the job is the same as anywhere: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
Every job comes with a 12-month guarantee, wherever you are in the Scottish Borders.
- Where
- Newmill (TD9)
- Wider area
- Scottish Borders
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlord and commercial work in Newmill
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we are fully insured.
Common problems we fix in Newmill
Grout used in corners or along the bath cracks because those joints flex. Those joints should be silicone, and when they are not, water gets in.
Common reasons people contact us are:
- Stained grout that cleaning won’t shift
- Discoloured grout on otherwise sound tiles
- Old grout in a dated colour
- Crumbling grout between the tiles
For jobs in and around Newmill, choosing the right material for each joint is as important as a tidy finish.
Before booking anyone
- Who turns up on the day
- Is VAT in the price?
- Whether they’re fully insured
- Whether the sealant suits the joint
More services for Newmill
What happens if it’s left?
If tiles are loose, regrouting alone isn’t the answer. We point that out first, so you can decide what to do. On sound tiles, regrouting avoids the upheaval of a retile. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Combining jobs into one visit is generally more efficient than separate visits. We’ll give you a clear price for the lot.
Why us?
- Rated 4.9 stars on Google
- 12-month guarantee on every job
- More than 20 years in sealant work
- Experience in homes, commercial sites and hotels
See our cost guide or our reviews.
Newmill: your questions answered
Do you cover Newmill for regrouting?
Yes. Our work covers the whole of Scotland, and Newmill is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing.
Do you cover smaller places like Newmill?
Yes. Newmill is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Are you fully insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
How do I get a quote for regrouting in Newmill?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
Do you grout the corners?
Flexible sealant. Grout belongs between the tiles and moving joints need sealant.
Will regrouting fix loose tiles?
If tiles are loose, something behind them has usually failed. Regrouting alone isn’t the answer and we’ll say so before going ahead.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Regrouting around Newmill
In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.
Around Newmill, as everywhere, regrouting is only as good as the preparation behind it.
Newmill is about 4 miles south-west of Hawick, in the Scottish Borders. From the centre of Newmill to the outskirts, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 89 towns and villages across the Scottish Borders. We also work in Edinburgh, about 41 miles from Newmill.
We cover every part of TD9 for regrouting and the streets around it. Being close to the A7, Newmill is easy for our applicators to reach. Nearby, we also carry out regrouting in Wilton Dean (4 miles north-east), Wilton (4 miles north-east), Hawick (4 miles north-east), Stirches (5 miles north-east) and Burnfoot (5 miles north-east). Larger places within reach include Selkirk (12 miles north), Jedburgh (14 miles north-east), Denholm (9 miles north-east), Copshaw Holm (14 miles south) and Newtown St Boswells (15 miles north-east).
Landmarks near Newmill
Well-known places in the area include Branxholme Castle (1.2 miles north-east) and Hawick Cottage Hospital and Lamp Standard (3.8 miles north-east). The countryside around Newmill includes Branxholme Easter Loch.
Different surfaces, different methods
Bathroom floors
Grout on a floor is walked on as well as wetted. It wears and darkens over time.
Shower walls
Most regrouting jobs include a shower. Gaps here let water get behind the tiling.
How it works
There isn’t much for you to do on the day. Show us the job and we will take it from there. The job generally takes a few hours, or longer for a fully tiled room. Somewhere like Newmill may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
Getting a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work and send you a clear quote.
Read more
What affects the cost of regrouting
Every job gets its own quote. These are the things that affect it:
- Any mould that needs treating
- How many rooms, windows or areas are involved
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- The address or postcode of the job
- Roughly how big the job is
- Whether it’s a home or a business
- How we’d reach the joints
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.