Hampshire · England

Regrouting in Milland, Hampshire

Specialist regrouting for Milland: the right sealant, proper preparation and a neat finish. Call for a quick quote.

  • Kitchen splashback grout stained by grease
  • Old grout in a dated colour
  • Discoloured grout on otherwise sound tiles

Need regrouting in Milland?

Regrouting for homes and businesses in Milland

We work across Milland, regrouting bathrooms, showers and kitchens. The old grout is raked out, the joints cleaned and new grout laid, finished with new silicone at the edges. We work on shower walls, kitchen splashbacks and wet rooms, and the jobs we see most are grout that stays dark however much it’s cleaned and grout that makes sound tiles look old.

Homes around Milland are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.

All our work comes with our 12-month guarantee, wherever you are in Hampshire.

Where
Milland (GU30)
Wider area
Hampshire
Guarantee
12 months on all our work
Quote
Quoted before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026
Silicone being applied where a shower enclosure meets beige wall tiles

What we do, step by step

There isn’t much for you to do on the day. Show us the job and we will take it from there. The work itself takes a few hours, or longer for a fully tiled room. In a small place like Milland, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We check the tiles for any that are hollow or loose.
  2. The old grout is removed to an even depth.
  3. The joints are vacuumed clean.
  4. New grout is pressed into the joints and the tiles are cleaned.
  5. We finish with silicone in the moving joints.

Before we arrive

  • Clear items away from the joints we are working on
  • On commercial sites, let us know about site rules
  • Let us know about parking restrictions

Ask for a quote

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.

Ask for a quote

Related advice

What sealant work can’t fix

To be straight with you, some problems need a different trade:

  • A leaking shower valve or waste
  • Failed tanking or waterproofing under the tiles
  • Damaged tiles that need replacing

If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer before booking.

What we seal

  • Kitchen splashbacks
  • Shower walls
  • Bathroom floors
  • Bathroom wall tiles
  • Wet rooms
  • Tiled floors

Questions from Milland

Is Milland within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Can you do regrouting in Milland?

Yes. Our work covers London and the South East, and Milland is part of that. Just phone 0345 464 0079 or email us with a few details of the job.

Do you take out the old sealant first?

Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.

Can you quote for more than one area?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

Can you regrout if a few tiles are loose?

Loose or hollow tiles are a sign of a problem behind them. Regrouting alone is not the answer, and we will tell you before any work starts.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status.

Can tenants book the work?

Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.

How long should I wait before showering?

Before we leave, we will tell you how long to wait. Both the grout and the silicone need time to cure before the shower is used.

Why deal with it now?

Grout pens and paint-on colourants only cover the surface. They will not fill gaps or keep water out, and stains can show through again. A proper regrout puts new grout in the joint. In a small place like Milland, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.

Why us?

  • Rated 4.9 stars on Google
  • An ARBOMaster approved applicator
  • Domestic, commercial and hotel work
  • We’re fully insured

Take a look at how sealant jobs are priced and our reviews.

How we quote for regrouting

You will get a clear quote before any work starts. It’s based on:

  • Which sealant suits the joint
  • Whether there’s mould to deal with
  • The amount of work
  • Working hours on commercial sites

No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.

What to tell us for a quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Photos by email, if that is easy
  • Whether it has been sealed before
  • The type of property
  • The problem you’ve noticed

It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you’re ready, phone 0345 464 0079 or email us.

Regrouting in Milland: local notes

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

Letting a property close to Liphook station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. If you look after a building such as Hollycombe Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Milland is about 6 miles east of Petersfield, in Hampshire. From the centre of Milland to the outskirts, we cover regrouting for every kind of property, from flats and houses to offices and hotels. Our area takes in 683 places across Hampshire. Portsmouth is on our list too, about 20 miles from Milland.

We cover every part of the GU30 postcode area for regrouting. That includes homes and businesses on Milland Lane, Mill Vale Meadows and Drakeleys Field and the roads around them. Nearby, we also carry out regrouting in Trotton Marsh (1 mile south), Borden (2 miles south-west), Rake (2 miles west), Chithurst (2 miles south) and Rogate (3 miles south-west). We also work in nearby towns such as Havant (14 miles south-west), Horndean (13 miles south-west), Aldershot (15 miles north), Alton (11 miles north-west), Waterlooville (15 miles south-west) and Petersfield (6 miles west).

Around Milland

We work in homes and buildings around The Rising Sun pub and the streets around them. Milland’s nearest station is Liphook station, roughly 2.4 miles north of the centre. Nearby you will also find Midhurst Community Hospital (4.3 miles south-east). For a walk, there’s Wheeler's Down and Lynchmere Commons.

Map of Milland © OpenStreetMap contributors

Work for landlords, hotels and businesses

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

If you manage several properties in or around Milland, jobs at different addresses can go on one quote. Send us the addresses and the work at each.

Aftercare tips

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Have loose tiles looked at early
  • Skip wire brushes and scourers
  • Wipe or squeegee the shower walls
  • Rinse the tiles after showering

Before we leave, you’ll know when the shower can be used. Please follow it, and avoid scrubbing the new grout hard for the first few days.

Grout that’s washing out of a shower shouldn’t be left. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.

What we’re called out for in Milland

Grout that was put in corners cracks as the bath or tray moves. Those joints should be silicone, and if they’re grouted, a crack soon lets water in.

Signs it’s time to call us include:

  • Splashback grout that has darkened
  • Cracked or crumbling grout lines
  • Grout washed out of a shower
  • Grout that makes sound tiles look old

Homes close to Tuxlith Chapel include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Comparing quotes

  • Are they insured?
  • How long the guarantee is
  • How much experience the applicator has
  • Which sealant they’ll use, and why

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job