Hampshire · England
Chithurst Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Chithurst, with a one-year guarantee on every job. Call for a quick quote.
- Discoloured grout on otherwise sound tiles
- Splashback grout that has darkened
- Grout in a colour the owner wants to change
Regrouting for homes and businesses in Chithurst
Before work begins, the tiles are checked. Loose or hollow tiles are pointed out first, because regrouting will not fix what’s behind them. Where the tiles are sound, regrouting gives the area a new lease of life. If you are dealing with a grout colour that no longer suits the room and grout that makes sound tiles look old, we can help.
Homes around Chithurst are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
You’re covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or send us an email.

- Location
- Chithurst (GU31)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of regrouting
Jobs vary more than people expect. The main factors:
- Any working-time requirements on site
- The amount of work
- Which sealant suits the joint
- Access and height
Doing several joints on one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Asking for a quote
When you call or email, it’s useful to know:
- Whether it has been sealed before
- The rough size of the job
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or email us.
Why act early in Chithurst
Colouring the surface of old grout is a quick cosmetic fix. They don’t fill cracks or stop water, and stains can show through again. Raking out and regrouting replaces the grout itself. Where a wall is exposed, as many are in small places like Chithurst, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why book with us
- Experience in homes, commercial sites and hotels
- Fully insured
- 180+ five-star Google reviews
- One-year guarantee on every job
See what affects the cost or our reviews.
Places near Chithurst
More services for Chithurst
Landlords, agents and businesses in Chithurst
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Bathrooms and kitchens in Chithurst
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For landlords with property near Liphook station, stained grout drags a rental down, and regrouting between lets puts that right. For site and facilities teams at buildings such as Stedham Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Chithurst is about 6 miles east of Petersfield, in Hampshire. Whether you’re in the middle of Chithurst or further out, we cover regrouting for every kind of property, from flats and houses to offices and hotels. Our area takes in 683 places across Hampshire, large and small. You can also see our page for Portsmouth, about 18 miles away.
Postcode districts we cover here for regrouting: GU31. Close by, we work in Trotton Marsh (1 mile north-west), Borden (1 mile north-west), Rogate (2 miles west), Milland (2 miles north) and Rake (4 miles north-west). Larger places within reach include Havant (13 miles south-west), Horndean (11 miles south-west), Alton (13 miles north-west), Waterlooville (13 miles south-west), Petersfield (6 miles west) and Purbrook (14 miles south-west).
Around Chithurst
We work in homes and buildings around The Keeper's Arms Public House and the streets around them. For rail, the closest station is Liphook station, about 4.9 miles north. Other landmarks nearby include Midhurst Museum (2.9 miles east) and Midhurst Community Hospital (2.9 miles east). Open spaces near Chithurst include Wheeler's Down and Iping and Stedham Commons.
Do you need regrouting in Chithurst?
Some grout fails because it was mixed or laid badly. Grout that was too wet, not packed in or cleaned off too hard can wash out within a few years.
Look out for any of the following:
- Splashback grout that has darkened
- Gaps where the shower grout has gone
- Floor grout that has worn and darkened
- Grout stained black or orange that will not clean
Homes close to Chithurst Church include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- What the cure time is
- How the surfaces are prepared before sealing
- What happens if the job turns out different
- Who does the work, and how experienced they are
Honest limits
New sealant cannot fix everything, and we’d rather say so up front. It will not solve:
- A leaking shower valve or waste
- Tiles that are loose or hollow behind
- Movement in a stud wall or floor
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles
- Shower walls
- Wet rooms
- Bathroom floors
Chithurst: your questions answered
Can you do regrouting in Chithurst?
Yes, Chithurst is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.
Is Chithurst within the area you cover?
Yes. Chithurst is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you seal over the old sealant?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
What do you need from me for a quote?
Just the basics: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or email us.
Will there be a smell?
Some sealants have a smell while they cure. Ventilation helps.
Can you regrout just the shower?
Yes, that is common. The shower normally fails first, so it’s often the only area that needs doing.
How long does the job take?
It depends on the size of the job, but as a guide it takes anything from a few hours to a full day, depending on the area. We’ll tell you when we quote.
What guarantee comes with the work?
There’s a 12-month guarantee on every job, including regrouting.
Different surfaces, different methods
Shower walls
A shower wall is soaked daily, so grout there works hardest. It generally fails first.
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The worktop edge is finished with silicone.
How it works
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take anything from a few hours to a full day, depending on the area. Somewhere like Chithurst needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the tiles for any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- We fill the joints with new grout, then clean the tiles.
- We reseal the internal corners and edges with silicone.
Before we arrive
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
