Aberdeen · Scotland
Mill of Fintray Regrouting
Tiled areas in Mill of Fintray need attention? We remove the old material, prepare the joints and seal them properly.
- Floor grout that has worn and darkened
- Discoloured grout on otherwise sound tiles
- Grout that is cracking and breaking up
What happens if it’s left?
Cracked grout lets water behind the tiles. Left alone, that water can loosen tiles or damage the wall, which turns a regrout into a retile. Dealing with it now keeps it small. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll go through it with you.
What you get with us
- We leave the area clean and tidy
- Old sealant always removed completely
- Every job guaranteed for a year
- ARBOMaster approved applicator
About our regrouting in Mill of Fintray
Across Mill of Fintray, we regrout tiled showers, bathrooms and kitchens. Out comes the old grout, the joints are cleaned and new grout goes in, finished with new silicone at the edges. Common call-outs are for grout that makes sound tiles look old and grout that’s cracking and breaking up, across bathroom floors, shower walls and bathroom wall tiles.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
Each job carries a 12-month guarantee.
- Location
- Mill of Fintray (AB21)
- Wider area
- Aberdeen
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Towns and villages near Mill of Fintray
Other services in Mill of Fintray
Aftercare tips
Looking after new joints is easy:
- Rinse the tiles after showering
- Check the corner silicone every few months
- Clean with a soft brush, not anything metal
- Don’t use strong acidic cleaners on grout
If a tile starts to feel loose, get it looked at early. Movement will crack the new grout and lets water in.
Leaving failed grout can mean tiles come loose. By then, new grout alone isn’t enough so early action pays.
Regrouting in Mill of Fintray: local notes
In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Aberdeen, the Granite City, has plenty of granite tenements, where, as in any flat, a failed seal can reach the flat below.
If you let a flat or house near Kintore station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Mill of Fintray is about 5 miles south-east of Inverurie, in Aberdeen. From the centre of Mill of Fintray to the outskirts, regrouting is available for homes and businesses alike. Our area takes in 63 places across Aberdeen, large and small. For nearby work, see our Aberdeen page.
Our applicators cover all of the AB21 postcode area for regrouting. Close by, we work in Hatton of Fintray (1 mile east), Blackburn (2 miles south), Kinmuck (2 miles north-west), Kinellar (3 miles south-west) and Kintore (3 miles west). Further out, we also cover Aberdeen (8 miles south-east), Rosemount (9 miles south-east), Berryden (8 miles south-east), Ferryhill (10 miles south-east), New Aberdeen (9 miles south-east) and Dyce (4 miles south-east).
Around Mill of Fintray
The nearest railway station is Kintore station, roughly 2.8 miles west. Well-known places in the area include Hallforest Castle (3.6 miles west) and Inverurie Hospital (4.6 miles north-west). Green spaces nearby include Temple Hill.
Common questions in Mill of Fintray
Do you cover smaller places like Mill of Fintray?
Yes. Mill of Fintray is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you cover Mill of Fintray for regrouting?
Yes. Our work covers the whole of Scotland, and Mill of Fintray is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing.
How long does the job take?
Most jobs take anything from a few hours to a full day, depending on the area, including the preparation. We will confirm how long when we quote.
Do you guarantee regrouting?
There’s a 12-month guarantee on every job, including regrouting.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.
Do you have insurance?
Yes. We are fully insured for every job we do.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Landlord and commercial work in Mill of Fintray
We work for letting agents and landlords as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
What happens on the day
There is not much for you to do on the day. Show us the job and we will take it from there. The work itself takes a few hours for a shower enclosure, longer for a whole room from start to finish. In smaller Scottish places, parking is normally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
How to prepare
- Mention any tricky access
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
Getting a quote
To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before any work starts.
Read more
Signs you need regrouting in Mill of Fintray
Poor ventilation keeps grout damp, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
Look out for any of the following:
- Discoloured grout on otherwise sound tiles
- Gaps where the shower grout has gone
- Cracked grout along the bath or tray
- Dirty, worn grout on a tiled floor
Homes close to Fintray Parish Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Questions to ask before booking
- What product goes in the joint
- Whether they seal over old material or remove it
- How long to leave it before use
- Whether VAT is included
Quotes for regrouting in Mill of Fintray
We quote each job individually. This is what makes a difference:
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- Any mould that needs treating
- The old material and how stubborn it is
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins, so you know where you stand.
What we need to know
When you contact us, it’s useful to know:
- Access, such as stairs, a lift or height
- Where the job is, and your postcode
- The type of property
- Photos by email, if that’s easy
We don’t publish a price list. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.
Different surfaces, different methods
Corners and edges
Internal corners move, so they get silicone, not grout.
Shower walls
Showers put more water on grout than anywhere else. We replace it, and reseal the corners.