Kent · England
Regrouting in Mill Hill, Kent
Raking out old, cracked or stained grout and regrouting tiled walls and floors for householders, landlords and businesses in Mill Hill. Fully insured, ARBOMaster approved and guaranteed for a year.
- Good tiles let down by tired grout
- Cracked or crumbling grout lines
- Grout in corners that has cracked
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Regrouting in Mill Hill
We check the tiles before any grout comes out. Loose or hollow tiles are pointed out first, since new grout cannot fix a problem underneath. With sound tiles, regrouting is a tidy, lasting improvement. Common call-outs are for grout in corners that has cracked and grout stained black or orange that won’t clean, on kitchen splashbacks, bathroom floors and bathroom wall tiles.
Smaller places like Mill Hill still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Mill Hill (CT14)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Do you need regrouting in Mill Hill?
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
The most common problems we see are:
- Grout that makes sound tiles look old
- Corners filled with grout instead of silicone
- Grout in a colour the owner wants to change
- Crumbling grout between the tiles
For landlords with property near Walmer station, a regrout while the flat is empty is quicker than working around a tenant.
What to look for in a quote
- How much experience the applicator has
- What happens if the job turns out different
- How the colour is chosen
- What the cure time is
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Rinse the tiles after showering
- Look at the sealant in the corners now and then
- Clean grout with a mild bathroom cleaner
- Wipe or squeegee the shower walls
Use a gentle cleaner on the grout and a soft brush. Avoid neat bleach and strong acid descalers because they wear grout away.
Cracked grout doesn’t stay cracked for long. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.
What regrouting looks like in Mill Hill
Mill Hill is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. There are hotels and other places to stay in and around Mill Hill. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For site and facilities teams at buildings such as St Mary's Catholic Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as St Richard, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Mill Hill is about 1 mile west of Deal, in Kent. Every kind of property in Mill Hill can book us for regrouting, old or new, large or small. Every job comes with our 12-month guarantee. Mill Hill is one of 922 places in Kent where we work. For nearby work, see our Chelmsford page.
Jobs for regrouting in CT14 is quoted and booked the same way as anywhere else. If you need regrouting at a property on Mary Road, Glack Road and Lydia Road or anywhere close by, our applicators can take on the job. Close by, we work in Great Mongeham (1 mile west), Deal (1 mile east), Sholden (1 mile north), Sholden Meadows (1 mile north) and Walmer (1 mile south-east). Further out, we also cover Canterbury (14 miles west), Margate (12 miles north), Dover (6 miles south-west), Folkestone (13 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).
Landmarks near Mill Hill
Locally, jobs take us to homes and businesses close to The Mill Inn, Goodwin Academy and Betteshanger Park. The closest station to Mill Hill is Walmer station, roughly 0.7 miles south-east. A little further out are Kent Museum of the Moving Image (1.3 miles north-east) and Deal Castle (1.3 miles east).
When something else is needed
It helps to know what we cannot do:
- Leaks from pipes, valves or wastes (a plumber’s job)
- Tiles that are loose or hollow behind
- A structure that flexes behind the tiles
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
What we seal
- Bathroom floors
- Bathroom wall tiles
- Kitchen splashbacks
- Tiled floors
- Shower walls
- Wet rooms
What happens if it’s left?
Grouting over old grout rarely lasts. A thin skin on top tends to break off. Removing the old grout to an even depth lets the new grout key in properly. Around Mill Hill, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- Over 20 years’ experience
- We leave the area clean and tidy
- An ARBOMaster approved applicator
- 180+ five-star Google reviews
See our cost guide and what customers say.
What we do, step by step
On the day, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. Most jobs take a few hours for a shower enclosure, longer for a whole room. In a smaller place like Mill Hill, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
How to get a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
Places near Mill Hill
Other services in Mill Hill
Quotes for regrouting in Mill Hill
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- The product the joint needs
- Whether there’s mould to deal with
- The old material and how stubborn it is
- The size of the job
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
What we need to know
To make quoting easier, let us know:
- Whether it’s a home or a business
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- How we’d reach the joints
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved before giving you a price.
Mill Hill questions
Is Mill Hill within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Walmer station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
Where is Mr Mastic based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Will the old sealant be removed?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
Could my grout be a different colour after regrouting?
Yes, plenty of people choose to. A darker grout hides marks better and lighter grout gives a fresher look.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
When can I use the shower again?
We’ll tell you on the day. It depends on the grout and the sealant used so please stick to it.