Kent · England
Regrouting in Walmer, Kent
Professional regrouting in and around Walmer, with every bit of old sealant taken out first.
- Greasy, stained grout behind the hob
- Good tiles let down by tired grout
- Grout in a colour the owner wants to change
Aftercare tips
So the new joints stay in good condition:
- Use a squeegee on the tiles after showering
- Rinse soap off the tiles after each shower
- Check the corner silicone every few months
- Do not use strong acidic cleaners on grout
Have any tile that moves checked straight away. Movement will crack the new grout and lets water in.
If grout in the shower is washing out, act soon. Each shower drives water into the open joints, and that water can reach the wall or the floor below.
How we handle regrouting in Walmer
A grout colour change can freshen a room without retiling. You might go from white to grey, or the other way round. Just mention the colour you’d like when you call 0345 464 0079 or send us an email. If you are dealing with floor grout that won’t come clean and gaps where the shower grout has gone, we can put it right, on wet rooms, bathroom floors and tiled floors alike.
In a smaller place like Walmer, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Walmer (CT14)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Places near Walmer
What else we do in Walmer
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
What we do, step by step
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes anything from a few hours to a full day, depending on the area from start to finish. A visit to Walmer is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
How to get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
Why act early in Walmer
Cleaning products may brighten grout for a time, but stains and mould that have soaked in tend to return. New grout, with silicone in the corners, deals with the cause. Homes in smaller places like Walmer can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, phone 0345 464 0079 or send us an email and we will give you an honest view and a quote.
Why us?
- Approved under the ARBOMaster scheme
- 20+ years of sealant experience
- Quality sealants from Arbo and Everbuild
- Homes, businesses and hotels
Take a look at our cost guide or customer reviews.
DIY versus a professional finish
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What regrouting looks like in Walmer
Walmer is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Walmer has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you live in an older home near St Mary's Church, walls and floors in older homes can move, and sealant and grout show it first. If you let a flat or house near Walmer station, a regrout while the flat is empty is quicker than working around a tenant. Managing a site like The Downs Church of England Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Walmer is about 6 miles north-east of Dover, in Kent. Jobs in Walmer get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. 922 places in Kent are on our list. For nearby work, see our Chelmsford page (54 miles or so).
We work across CT14 for regrouting and the streets around it. Local streets include Lawn Road, York Road and Grams Road, and we cover them all. With the A258 close by, Walmer is easy for our applicators to reach for regrouting. We also cover the places around Walmer: Deal (1 mile north), Mill Hill (1 mile north-west), Great Mongeham (2 miles north-west), Sholden (2 miles north-west) and Ripple (2 miles west). Within a short drive, we also cover Canterbury (15 miles west), Margate (12 miles north), Dover (6 miles south-west), Folkestone (13 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).
Local landmarks in Walmer
In Walmer, that means homes and buildings near Goodwin Academy and The Telegraph pub, among other places. The nearest railway station is Walmer station, about 0.7 miles west of the centre. Nearby you will also find Kent Museum of the Moving Image (1.4 miles north) and Walmer Castle (under half a mile south-east).
What affects the cost of regrouting
Some jobs are bigger than they look, and some smaller. The main factors:
- Any working-time requirements on site
- How many rooms, windows or areas are involved
- Whether the work is at height
- The old material and how stubborn it is
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What to tell us for a quote
Before you ask for a quote, have a think about:
- How we’d reach the joints
- A few photos by email, if you can
- What’s wrong with the joints now
- If someone has resealed it before
For regrouting in Walmer, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
Your questions about regrouting in Walmer
Do you work for landlords with property near Walmer station?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before any work starts.
Do you work for hotels and guest houses in Walmer?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
How do I get a quote for regrouting in Walmer?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.
Do you come to Walmer?
We do. Walmer is part of the area we cover, and the service is the same as everywhere else.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.
Are you insured?
Yes. We are fully insured.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
How long will you be here?
As a guide, most jobs take a few hours for a shower enclosure, longer for a whole room. Bigger jobs take longer.
Surface by surface
Shower walls
Shower walls are the most common area we regrout. Gaps here let water get behind the tiling.
Corners and edges
The joint between tiles and a bath, tray or worktop gets silicone. Grout in that joint wouldn’t last.