Greater London · England
Kingston Vale Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Kingston Vale, backed by a 12-month guarantee. Ask us for a quote.
- Gaps where the shower grout has gone
- Corners filled with grout instead of silicone
- Grout stained black or orange that will not clean
What sealant work cannot fix
It helps to know what we cannot do too:
- Loose tiles, which need refixing first
- Cracked or broken tiles
- Movement in a stud wall or floor
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before booking.
Where we work in Kingston Vale
- Wet rooms
- Tiled floors
- Shower walls
- Bathroom wall tiles
- Bathroom floors
- Kitchen splashbacks
How we handle regrouting in Kingston Vale
Regrouting is usually paired with resealing. Grout is for the joints between tiles, but internal corners and edges flex, so they need flexible silicone instead. Renewing both together means nothing is left half-done. If you’re dealing with good tiles let down by tired grout and grout that stays dark however much it’s cleaned, we can put it right, on shower walls, bathroom floors and bathroom wall tiles alike.
Hard London water leaves limescale on sealant, grout and taps alike. For a bathroom or kitchen in Kingston Vale, getting the joints right keeps water where it belongs and the room looking clean.
Big or small, you get the same 12-month guarantee.
- Where
- Kingston Vale (SW15, KT2, SW20)
- Wider area
- Greater London
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Your questions about regrouting in Kingston Vale
Do you take on hotel work around Kingston Vale?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can you help a landlord with a rental near Raynes Park station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
Is regrouting a chance to pick a new grout colour?
Yes. It’s the ideal time to change it. Mention the colour you have in mind when you ring 0345 464 0079 or send us an email.
How long does the job take?
It depends on the size of the job, but as a guide it takes a few hours for a shower enclosure, longer for a whole room. We’ll give you a better idea when we quote.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
How much does regrouting cost in Kingston Vale?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or drop us an email and let us know what needs doing and where.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all.
Kingston Vale homes and their sealant
London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early. There are hotels and other places to stay in and around Kingston Vale. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
Schools such as Robin Hood Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Kingston Vale is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book. In the older streets around St John the Baptist, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Kingston Vale is about 2 miles west of Wimbledon, in Greater London. Every kind of property in Kingston Vale is covered for regrouting. Every job comes with our one-year guarantee. Our Greater London coverage runs to 764 places, Kingston Vale among them. For nearby work, see our London page (8 miles or so).
Every address in SW15, KT2 and SW20 is within our area for regrouting. Local streets include Keswick Avenue, Derwent Avenue and Robin Hood Lane, all of which we cover. Being close to the A308, Kingston Vale is easy for our applicators to reach for regrouting. If you are just outside Kingston Vale, we cover Putney Vale (1 mile north), Coombe Hill (1 mile west), Coombe (1 mile south-west), Copse Hill (1 mile south-east) and Crooked Billet (1 mile south-east). Further out, we also cover London (8 miles north-east), City of Westminster (7 miles north-east), Marylebone (8 miles north-east), Kensington (5 miles north-east), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).
Near you in Kingston Vale
We work in homes and buildings around The Norwegian School in London, Hall School Wimbledon and Duke of Cambridge pub. Kingston Vale’s nearest station is Raynes Park station, about 1.7 miles south-east. Nearby you will also find Bentall Centre (2.6 miles south-west) and Wimbledon Windmill Museum (1 mile north-east). Not far away are Fishpond Wood and Beverley Meads and Kew Gardens Lake.
Nearby places to Kingston Vale
Also in Kingston Vale
How the job changes by surface
Shower walls
The grout in a shower takes the brunt of the water. We replace it and renew the silicone at the edges.
Bathroom wall tiles
Grout by the basin and bath tends to mark first. We can regroute just those areas or the whole wall.
What affects the cost of regrouting
We quote each job individually. This is what makes a difference:
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- Whether the work is at height
- The number and length of the joints
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Asking for a quote
When you contact us, these details help:
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Get any tile that moves checked promptly
- Look at the sealant in the corners now and then
- Use a squeegee on the tiles after showering
- Use gentle cleaners on grout
Leave the area unused for as long as we advise, so it cures fully. After that, rinse the tiles after showering and keep the room ventilated.
Stains that will not clean are a sign the grout is breaking down. At this point it’s a simple regrout while the tiles are still sound.
Landlords, agents and businesses in Kingston Vale
For anyone letting property in or around Kingston Vale, several properties can go on one quote. Just tell us the addresses and what each one needs.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours, or longer for a fully tiled room and we leave things clean and tidy. In Kingston Vale, as in most of London, parking needs a little planning. It helps if you can point us to a visitor permit or a bay close to the door.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Getting ready for the visit
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
How to get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, ring 0345 464 0079 or email us.