Greater London · England

Regrouting in Copse Hill, Greater London

Raking out old, cracked or stained grout and regrouting tiled walls and floors for householders, landlords and businesses in Copse Hill. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Kitchen splashback grout stained by grease
  • Corners filled with grout instead of silicone
  • Gaps where the shower grout has gone

Need regrouting in Copse Hill?

How we handle regrouting in Copse Hill

A bathroom with good tiles can still look worn if the grout has gone. With regrouting, the tiles stay and only the grout is renewed, so there’s no stripping out and no new tiles to choose. We work on bathroom wall tiles, shower walls and bathroom floors, and people most often call us about grout in corners that has cracked and stained grout that cleaning won’t shift.

London’s water is hard, so limescale builds up along sealant lines, in grout and on fittings. In Copse Hill, regrouting is as much about a room looking cared for as about keeping water out.

We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.

Applicator in a navy top running a bead of silicone up a shower screen wall profile
Place
Copse Hill (SW20, SW19)
Wider area
Greater London
Guarantee
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026

What happens on the day

Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes a few hours for a shower enclosure, longer for a whole room, and the area is left clean. In a London area like Copse Hill, the main things to plan are parking and access: let us know about parking, the floor we will be working on and any lift or shared entrance.

  1. We check the tiles for any that are hollow or loose.
  2. We rake out the grout evenly, protecting the tile edges.
  3. The joints are vacuumed clean.
  4. We regrout the joints and clean the tile faces.
  5. We finish with silicone in the moving joints.

How to prepare

  • For indoor joints, keep the area dry beforehand if you can
  • Let us know if you’ve seen damp or leaks
  • Plan for the work area to be out of bounds to pets and children

Getting a quote

There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.

Get a quick quote

Advice

How the job changes by surface

Shower walls

The grout in a shower takes the brunt of the water. We rake it out and regrout, and reseal the corners.

Corners and edges

Internal corners move, so we seal them rather than grout them.

Regrouting in Copse Hill: local notes

In a London flat, water from a failed bath or shower seal can reach the neighbours below, which is why it’s worth fixing early. London’s water is hard, so limescale builds up on sealant, grout and fittings.

For landlords with property near Raynes Park station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. Copse Hill is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book.

Copse Hill is about 1 mile south-west of Wimbledon, in Greater London. For regrouting in and around Copse Hill, please ring 0345 464 0079 or drop us an email for a quick quote. We cover Greater London from our Crawley base. Our area takes in 764 places across Greater London, large and small. You can also see our page for London, about 8 miles away.

All of SW20 and SW19 is within our area for regrouting. Local streets include Camp Road, Almer Road and Mckay Road, and we cover them all. Nearby, we also carry out regrouting in Crooked Billet (1 mile north-east), Bushey Mead (1 mile south-east), Motspur Park (1 mile south-west), Wimbledon (1 mile north-east) and Raynes Park (1 mile south). Within a short drive, we also cover London (8 miles north-east), City of Westminster (7 miles north-east), Marylebone (8 miles north-east), Kensington (6 miles north), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).

Landmarks near Copse Hill

We work in homes and buildings around The Norwegian School in London, Crooked Billet pub and Ursuline Preparatory School and the streets around them. For rail, the closest station is Raynes Park station, about 0.6 miles south of the centre. A little further out are Wimbledon Museum (0.8 miles north-east) and Atkinson Morley Hospital (within half a mile west). Green spaces nearby include Kew Gardens Lake and Henman Hill.

Map of Copse Hill © OpenStreetMap contributors

Signs you need regrouting in Copse Hill

Grout used in corners or along the bath cracks as the bath or tray moves. They need flexible sealant, and if they’re grouted, a crack soon lets water in.

Most people get in touch when they notice something like this:

  • Crumbling grout between the tiles
  • Grout in corners that has cracked
  • Discoloured grout on otherwise sound tiles
  • Grout that stays dark however much it’s cleaned

If you look after a building such as Hollymount School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

What your quote should include

  • Who turns up on the day
  • Whether all the old sealant comes out first
  • Which colour the sealant will be
  • Are they insured?

Our hiring checklist

Common questions in Copse Hill

Do you work for landlords with property near Raynes Park station?

Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.

Can worn sealant in a flat in Copse Hill cause a leak downstairs?

Yes, it can. Water that gets past failed sealant or cracked grout can run under the bath or tray and show up on the ceiling below. It’s far simpler to replace tired sealant early than to deal with a neighbour’s ceiling.

Can I add another job to the visit?

Yes, we can. More than one area can go on one quote.

Can you work on commercial sites?

Yes, regularly. Larger jobs can be planned room by room or area by area.

Is it messy?

No. The area is protected while we work and cleaned up afterwards.

What goes in the corners, grout or silicone?

Flexible sealant. Grout is for the joints between tiles and moving joints need sealant.

Will regrouting fix loose tiles?

Loose tiles need refixing before regrouting. We will show you which ones at the start.

Can new sealant go over the old?

No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.

What affects the quote in Copse Hill

We don’t publish a price list, because jobs vary so much. The quote depends on:

  • Any mould that needs treating
  • The number and length of the joints
  • Whether old sealant or filler has to be cut out
  • The product the joint needs

A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Asking for a quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • Any access issues, like height or stairs
  • Photos by email, if that is easy
  • Any previous sealing or DIY work
  • How many joints, rooms or windows are involved

Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.

Landlord and commercial work in Copse Hill

We work for landlords and agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

Can I do it myself?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

How to look after the new joints

Once the sealant has cured, a few habits help it last:

  • Don’t use strong acidic cleaners on grout
  • Wipe or squeegee the shower walls
  • Rinse soap off the tiles after each shower
  • Stick to mild products for cleaning grout

Before we leave, you will know when the shower can be used. Stick to that time, and go gently on the grout at first.

Cracked grout doesn’t stay cracked for long. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job