Greater London · England
Regrouting in Wimbledon Chase
Our applicators work in Wimbledon Chase on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Old grout in a dated colour
- Floor grout that has worn and darkened
- Gaps where the shower grout has gone
Regrouting for homes and businesses in Wimbledon Chase
We take the old grout out to a consistent depth, taking care not to chip the tile edges. The joints are then vacuumed, regrouted and cleaned off, with silicone renewed in the corners. We work on bathroom wall tiles, shower walls and wet rooms, and people most often call us about kitchen splashback grout stained by grease and old grout in a dated colour.
London homes include a lot of flats, conversions and mansion blocks, and many bathrooms sit right above someone else’s ceiling. In Wimbledon Chase, that’s a good reason to put tired sealant and grout right early.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Wimbledon Chase (SW19, SW20, SM4)
- Wider area
- Greater London
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
The process
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a shower enclosure, longer for a whole room. In a London area like Wimbledon Chase, the main things to plan are parking and access: let us know about parking, the floor we will be working on and any lift or shared entrance.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Clear items away from the joints we are working on
- Mention any parking rules near the property
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Read more
Signs you need regrouting in Wimbledon Chase
Soap scum and limescale build up on grout that is hard to shift. In time the grout under it darkens and breaks down, and at that point, new grout is the better answer.
People normally contact us after spotting one of these:
- Grout that’s cracking and breaking up
- Grout in corners that has cracked
- A grout colour that no longer suits the room
- Discoloured grout on otherwise sound tiles
As a London address, Wimbledon Chase can be tricky for parking: tell us about permits, visitor bays or off-street space when you book.
Comparing quotes
- Whether VAT is included
- Whether they’re fully insured
- Is the old sealant removed completely?
- How the joint is cleaned and prepared
Landlord and commercial work in Wimbledon Chase
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Regrouting in Wimbledon Chase: local notes
There are hotels and other places to stay in and around Wimbledon Chase. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. London has hard water, so limescale builds up on sealant, grout and fittings.
Rented homes near Wimbledon Chase station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right. Managing a site like Wimbledon Chase Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Wimbledon Chase is about 1 mile south of Wimbledon, in Greater London. Jobs in Wimbledon Chase get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 764 towns and villages across Greater London, large and small. You can also see our page for London, roughly 8 miles from Wimbledon Chase.
Our applicators cover all of the SW19, SW20 and SM4 postcode area for regrouting and the streets around it. If you need regrouting at a property on Edna Road, Manor Road and Dorien Road or anywhere close by, we can help. Nearby, we also carry out regrouting in Merton Park (1 mile east), Bushey Mead (1 mile west), Cannon Hill (1 mile south), Wimbledon (1 mile north) and Raynes Park (1 mile south-west). Within a short drive, we also cover London (8 miles north-east), City of Westminster (8 miles north), Marylebone (8 miles north), Kensington (6 miles north), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).
What’s near Wimbledon Chase
In Wimbledon Chase, that means homes and buildings near Rutlish School, Cannon Hill Common and Wimbledon School of Art and the streets around them. There’s a railway station in Wimbledon Chase itself: Wimbledon Chase station. Other landmarks nearby include Southside Wandsworth (3.2 miles north) and Chessington Castle Hill (5 miles south-west). The countryside around Wimbledon Chase includes Merton Park Green Walks and Henman Hill.
Places near Wimbledon Chase
Also in Wimbledon Chase
Common questions in Wimbledon Chase
Is parking an issue for regrouting in Wimbledon Chase?
Parking in Wimbledon Chase, as in most of London, takes a little planning: a visitor permit or a nearby bay makes the day run more smoothly.
Could a tired shower seal in my Wimbledon Chase flat affect the neighbours below?
Yes, it can. Water that gets past failed sealant or cracked grout can run under the bath or tray and show up on the ceiling below. It’s far simpler to replace tired sealant early than to deal with a neighbour’s ceiling.
Do you have insurance?
Yes. We are fully insured.
Do you come to Wimbledon Chase?
Yes, we do. Our applicators work in Wimbledon Chase, and the service is the same as everywhere else.
Can you regrout just the shower?
We can. We will look at the rest of the room too and let you know if more needs doing.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
What sealant work cannot fix
Before booking, it’s worth knowing the limits too:
- Leaks from pipes, valves or wastes (a plumber’s job)
- A floor or wall that keeps moving
- Tiles that have come away from the wall
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
Where we work in Wimbledon Chase
- Tiled floors
- Kitchen splashbacks
- Shower walls
- Wet rooms
- Bathroom wall tiles
- Bathroom floors
How we quote for regrouting
We do not publish a price list, because jobs vary so much. The quote depends on:
- Any working-time requirements on site
- The old material and how stubborn it is
- Any mould that needs treating
- The number and length of the joints
What you pay reflects the work, not guesswork. That is why we ask a few questions first.
Asking for a quote
You don’t need to know the technical terms. Just tell us:
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will talk you through the work before giving you a price.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Surface by surface
Bathroom floors
Cracked floor grout can point to movement underneath. We look for loose tiles first.
Shower walls
Shower walls get wet every day, so its grout takes the most punishment. It’s often the first place grout washes out.