Highland · Scotland
Kildary Regrouting
Problem with your tiled areas in Kildary? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Corners filled with grout instead of silicone
- Floor grout that has worn and darkened
- Grout washed out of a shower
What happens if it’s left?
It’s tempting to fill a few cracks yourself, but patched grout rarely matches the rest and the old grout carries on failing. Regrouting the whole area gives an even, lasting finish. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Why us?
- We’re fully insured
- ARBOMaster approved applicator
- Over 20 years’ experience
- 180+ five-star Google reviews
Read what affects the cost or our reviews.
Regrouting in Kildary, done properly
Across Kildary, we regrout tiled showers, bathrooms and kitchens. The old grout is raked out, the joints cleaned and new grout laid, finished with new silicone at the edges. If you are dealing with a grout colour that no longer suits the room and crumbling grout between the tiles, we can help, on tiled floors, kitchen splashbacks and wet rooms alike.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Where
- Kildary (IV18)
- Wider area
- Highland
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Also in Kildary
What the job involves on each surface
Shower walls
Showers put more water on grout than anywhere else. We rake it out and regrout, and reseal the corners.
Kitchen splashbacks
We can regroute a splashback with the kitchen left in place. The worktop edge is finished with silicone.
Questions from Kildary
Can you do regrouting in Kildary?
Yes. Our work covers the whole of Scotland, and Kildary is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear price.
I let a flat near Fearn station. Can you help?
Yes, rental work is part of what we do. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
Do you reseal at the same time?
We usually do. Fresh grout next to old, mouldy silicone would look odd and wouldn’t keep water out.
How soon can the shower be used after regrouting?
The wait depends on the materials and how warm the room is. We will tell you exactly how long at the end of the visit.
How do I get a quote for regrouting in Kildary?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.
What if some of my tiles are loose?
New grout cannot hold loose tiles in place. We flag any loose or hollow tiles before starting, so you can decide what to do.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
What regrouting looks like in Kildary
Kildary is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For an older house near a landmark such as Church, walls and floors in older homes can move, and sealant and grout show it first.
Kildary is about 14 miles north-west of Nairn, in Highland. Homes, rented property, offices and hotels in Kildary is covered for regrouting, old or new, large or small. Every job comes with our 12-month guarantee. 253 places in Highland are on our list.
Work in IV18 is quoted and booked the same way as anywhere else. You’ll find streets such as Parkside and Parkhill, all of which we cover. Other places close to Kildary include Milton (1 mile south-west), Kilmuir (1 mile south-west), Barbaraville (2 miles south-west), Arabella (2 miles east) and Pitcalnie (3 miles south-east). Within a short drive, we also cover Nairn (14 miles south-east), Tain (4 miles north), Alness (8 miles south-west), Dornoch (9 miles north), Invergordon (5 miles south-west) and Fortrose (12 miles south). For island and remote addresses, a little more planning is needed.
Landmarks near Kildary
The closest station to Kildary is Fearn station, roughly 3.4 miles north-east of the centre. Well-known places in the area include Milntown Castle (0.9 miles south) and County Community Hospital (4.7 miles south-west). Green spaces nearby include Loch Eye.
Signs you need regrouting in Kildary
Movement behind the tiles cracks grout. That can be a loose tile, a flexing floor or a stud wall, so we check the tiles before any work starts.
Common reasons people contact us are:
- Old grout in a dated colour
- Cracked grout along the bath or tray
- Grout that is cracking and breaking up
- Floor grout that has worn and darkened
Letting a property close to Fearn station? Then a regrout while the flat is empty is quicker than working around a tenant.
Questions to ask before you book
- Whether the sealant suits the joint
- Whether all the old sealant comes out first
- Is VAT in the price?
- What the cure time is
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How it works
On the day, we look over the joints with you first. Surfaces next to the work are protected before any work begins. The work usually takes a few hours for a shower enclosure, longer for a whole room. Somewhere like Kildary may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
How to prepare
- Mention if the joints have been sealed before
- Tell us about any water getting in
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Advice
For landlords and businesses
For anyone letting property in or around Kildary, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Honest limits
To be straight with you, there are a few things sealant will not fix:
- Loose tiles, which need refixing first
- Waterproofing that has failed below the tiling
- Leaks from pipes, valves or wastes (a plumber’s job)
If you’re not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Surfaces we seal
- Shower walls
- Tiled floors
- Bathroom floors
- Wet rooms
- Kitchen splashbacks
- Bathroom wall tiles