Hampshire · England
Regrouting in Elson
Our applicators work in Elson on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Stained grout that cleaning will not shift
- Discoloured grout on otherwise sound tiles
- Kitchen splashback grout stained by grease
About our regrouting in Elson
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Either way, tiled areas in Elson are handled the same careful way. Common call-outs are for grout stained black or orange that won’t clean and old grout in a dated colour, across bathroom wall tiles, bathroom floors and kitchen splashbacks.
Around Elson, you will mostly find houses and bungalows, from older cottages to newer builds. Sealant and grout wear out here just as they do in a big town.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Elson (PO12, PO13)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Elson and across Hampshire. Several sites can be quoted together.
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Regrouting in Elson: local notes
Elson is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Elson Infant School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Portsmouth Harbour station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. If you live in an older home near Church of St Thomas, older homes can move a little, which is hard on rigid grout and tired sealant.
Elson is about 1 mile north of Gosport, in Hampshire. If you need regrouting in Elson, please call 0345 464 0079 or email us for a quick quote. We’re based in Crawley and cover Hampshire, Elson included. Across Hampshire, we cover 683 places, and Elson is one of them.
Every address in PO12 and PO13 is covered for regrouting, from the main roads to the quietest streets. Regrouting is available to properties on Ham Lane, Quay Lane and Avery Lane and the roads around them. Main roads around Elson include the A32. Neighbouring places we cover for regrouting include Gosport (1 mile south), Forton (1 mile south), Bridgemary (1 mile north-west), Priddy's Hard (1 mile south-east) and Rowner (1 mile north-west). We also work in nearby towns such as Havant (8 miles north-east), Eastleigh (14 miles north-west), Fareham (3 miles north-west), Horndean (9 miles north-east), Hedge End (10 miles north-west) and Waterlooville (7 miles north-east).
What’s near Elson
Locally, jobs take us to homes and businesses close to The Kings Head pub, St Vincent College and Brune Park Community School, among other places. Elson’s nearest station is Portsmouth Harbour station, about 2.1 miles south-east. Other landmarks nearby include Search (1.6 miles south-east) and Portchester Castle (2.2 miles north-east). The countryside around Elson includes West of the River Alver and Portsdown Hill.
What sealant work can’t fix
In fairness, some problems need a different trade:
- Tiles that are chipped or split
- Waterproofing that has failed below the tiling
- A leaking shower valve or waste
If in doubt, ring 0345 464 0079 or email us and we will say what we think before you book.
Where we work in Elson
- Tiled floors
- Kitchen splashbacks
- Bathroom wall tiles
- Bathroom floors
- Shower walls
- Wet rooms
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Use gentle cleaners on grout
- Use a soft brush rather than a wire one
- Check the corner silicone every few months
- Give the walls a quick rinse after use
Before we leave, you’ll know when the shower can be used. Stick to that time, and avoid scrubbing the new grout hard for the first few days.
Fixing grout early is a small job. Left, the same problem can let water through, so get it looked at when you notice it.
Questions from Elson
Can you do regrouting in Elson?
Yes. Our work covers London and the South East, and Elson is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you work for landlords with property near Portsmouth Harbour station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned.
Is the work guaranteed?
You get our 12-month guarantee on every job. We’re also fully insured.
Do you work for hotels and businesses?
Yes. We can plan bigger jobs in stages.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Will there be a smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Surface by surface
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The worktop edge is finished with silicone.
Bathroom floors
Cracked floor grout can point to movement underneath. We check the tiles before regrouting.
The process
The work is kept neat and contained to the area we’re working on. Expect the work to take a few hours for a shower enclosure, longer for a whole room, and we explain the cure time before we leave. A visit to Elson is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
How to prepare
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
How to get a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Related advice
Quotes for regrouting in Elson
We do not publish a price list, because no two jobs are the same. What we look at:
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
- Which sealant suits the joint
- The number of rooms or windows
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
Helping us quote
There’s no need for technical detail. Just tell us:
- How we’d reach the joints
- Photos by email, if that’s easy
- Whether it has been sealed before
- The type of property
Need a quote? Please call 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Nearby places to Elson
What else we do in Elson
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.