Hampshire · England
Regrouting in Bradley
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Bradley and across Hampshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Good tiles let down by tired grout
- A grout colour that no longer suits the room
- Gaps where the shower grout has gone
Bradley: your questions answered
Is Bradley within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is there a guarantee on regrouting in Bradley?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done.
Can you seal over the old sealant?
No. New silicone won’t bond to old silicone, and it traps any mould or water underneath. We remove it all first.
What if some of my tiles are loose?
Tiles that have come away need sorting first. We’ll point them out before any grout comes out.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Regrouting in Bradley, done properly
We check the tiles before any grout comes out. If any tiles are loose or sound hollow, we tell you, because regrouting will not fix what’s behind them. Where the tiles are sound, regrouting gives the area a new lease of life. If you have crumbling grout between the tiles and good tiles let down by tired grout, we can put it right, on shower walls, tiled floors and bathroom wall tiles alike.
Homes around Bradley are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
There’s a 12-month guarantee on every job, large or small.
- Location
- Bradley (SO24)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How the job changes by surface
Kitchen splashbacks
We can regroute a splashback with the kitchen left in place. The joint along the worktop is resealed with silicone.
Bathroom wall tiles
Tiles away from the shower stay drier but still stain and crack. Regrouting brings them back in line.
The process
At the end, we look at the finished work together. The visit itself usually takes anything from a few hours to a full day, depending on the area, depending on the size of the job. Somewhere like Bradley needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Getting ready for the visit
- Let us know about parking restrictions
- Mention any tricky access
- On commercial sites, let us know about site rules
Getting a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or email us.
Advice
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Look at the sealant in the corners now and then
- Avoid neat bleach and strong acid descalers on grout
- Wipe water off the walls when you are done
- Stick to mild products for cleaning grout
Give the new grout the time we tell you before using the shower, so it cures fully. From then on, a quick rinse after showering helps and keep the room ventilated.
Stains that will not clean are a sign the grout is breaking down. At this point it’s a simple regrout, before the joints open up.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
Signs you need regrouting in Bradley
Some grout fails because it was mixed or laid badly. If it was mixed too wet or not pressed in firmly can wash out within a few years.
Common reasons people contact us include:
- Cracked or crumbling grout lines
- Discoloured grout on otherwise sound tiles
- Cracked grout along the bath or tray
- Floor grout that has worn and darkened
In the older streets around Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What your quote should include
- Whether they seal over old material or remove it
- Whether they’re fully insured
- How the joint is cleaned and prepared
- Whether the sealant suits the joint
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
More services for Bradley
What affects the cost of regrouting
The price is agreed before any work begins. It takes into account:
- The number of rooms or windows
- Any mould that needs treating
- The old material and how stubborn it is
- Working hours on commercial sites
Combining jobs into one visit is generally more efficient than separate visits. You’ll get one clear quote for the whole job.
What we need to know
Before you ask for a quote, have a think about:
- Any access issues, like height or stairs
- Any previous sealing or DIY work
- Photos by email, if that’s easy
- The address or postcode of the job
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. Whenever you’re ready, ring 0345 464 0079 or drop us an email.
Regrouting around Bradley
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Bradley, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Bradley is about 5 miles west of Alton, in Hampshire. Our applicators cover regrouting for homeowners, landlords and businesses in Bradley and nearby. Bradley is one of 683 places in Hampshire where we work for regrouting. You can also see our page for Reading, about 20 miles away.
We cover every part of SO24 for regrouting. Neighbouring places we cover for regrouting include Burkham (1 mile north-east), Bentworth (2 miles south-east), Holt End (2 miles south-east), New Copse (2 miles south-east) and Bagmore (3 miles north-east). We also work in nearby towns such as Basingstoke (7 miles north), Winchester (12 miles south-west), Fleet (13 miles north-east), Aldershot (15 miles east), Alton (5 miles east) and Petersfield (13 miles south-east).
Landmarks near Bradley
Other landmarks nearby include Barton Castle (2.3 miles south-west) and Alton Community Hospital (4.8 miles south-east). Open spaces near Bradley include King's Hill.