Hampshire · England
Bradley Gutter Sealing
Professional gutter sealing in and around Bradley, with every bit of old sealant taken out first.
- Gaps along fascia and soffit joints
- Stop ends leaking at the end of a run
- Earlier gutter repairs that have peeled off
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Keep downpipes clear
- Look along the fascias for open joints
- Deal with a drip before winter
- Watch for drips in a downpour
Clear the gutters once or twice a year, so water drains away past the joints. Standing water strains every seal.
A drip from a gutter joint will not stop on its own. The same spot gets soaked every time it rains and that can cause damp inside.
Gutter sealing in Bradley, done properly
Garage door frames let rain in when the sealant around them fails. The frame joint is cut out and resealed using a sealant made for outdoor use. We work on uPVC fascias, roofline trims and gutter joints, and common reasons people get in touch are water running down the wall below the gutter and open joints in fascias and soffits.
In a village or hamlet like Bradley, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Bradley (SO24)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What else we do in Bradley
What happens on the day
We bring everything the job needs with us, so you do not need to buy or prepare anything. Once we have agreed what’s being done, we protect the area and start. Most jobs take a few hours, depending on the number of joints and the access. For a village or hamlet like Bradley, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we find the drip and check the gutter isn’t cracked or sagging.
- We clean out the joint and take out the old sealant.
- The joint is dried, because sealant won’t bond to a wet surface.
- An exterior or gutter sealant is applied to the joint.
- We check the run and clear any debris we find while we’re there.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
- Let us know about parking restrictions
How to get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved.
Advice
Leave it or put it right?
Leaving a leaking end cap can send water down the wall all winter. It’s a small job to put right before the damage spreads. Where a wall is exposed, as many are in small places like Bradley, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
Why us?
- Arbo and Everbuild products
- Full insurance on every job
- An ARBOMaster approved applicator
- We leave the area clean and tidy
Take a look at how sealant jobs are priced and our reviews.
For landlords and businesses
Landlords and letting agents in Bradley can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Different surfaces, different methods
Gutter end caps
End caps are resealed where they meet the gutter once clean and dry.
uPVC fascias
Our work is the joints, not new fascias. If boards are damaged, we will tell you.
Quotes for gutter sealing in Bradley
Call for a quick quote. What matters most is:
- How much old sealant there is and how hard it is to remove
- The product the joint needs
- How easy the joints are to reach
- Mould in or behind the old joints
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What we need to know
You don’t need to know the technical terms. It helps if you can tell us:
- Any access issues, like height or stairs
- The type of property
- Whether it has been sealed before
- Where the job is, and your postcode
Asking for a quote is easy: let us know what needs doing and where. A few photos by email make the job easier to understand, and we’ll take it from there.
What sealant work cannot fix
To be straight with you, some problems need a different trade:
- Sagging gutters or broken brackets
- Water backing up from a blocked pipe
- Cracked, split or warped gutter sections
If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
What we seal
- Gutter joints
- Garage door frames
- Soffit joints
- Roofline trims
- uPVC fascias
- Gutter end caps
Bradley buildings and the weather
Historic houses like Hall Place (about 1.9 miles south-east) are a reminder that the area around Bradley has older buildings as well as new. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For an older house near a landmark such as Church of All Saints, older walls, gutters and the joints where extensions meet them need a flexible sealant. In and around Bradley, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Bradley is about 5 miles west of Alton, in Hampshire. Our applicators cover gutter sealing for homes and businesses in Bradley, as part of our work across Hampshire. 683 places in Hampshire are on our list. Our Reading page covers work nearby, about 20 miles away.
Work in SO24 works the same way as everywhere else we cover. Close by, we work in Burkham (1 mile north-east), Bentworth (2 miles south-east), Holt End (2 miles south-east), New Copse (2 miles south-east) and Bagmore (3 miles north-east). We also work in nearby towns such as Basingstoke (7 miles north), Winchester (12 miles south-west), Fleet (13 miles north-east), Aldershot (15 miles east), Alton (5 miles east) and Petersfield (13 miles south-east).
Around Bradley
A little further out are Barton Castle (2.3 miles south-west) and Alton Community Hospital (4.8 miles south-east). For a walk, there’s King's Hill.
Bradley: your questions answered
Can you do gutter sealing in Bradley?
Yes, Bradley is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing, and we’ll send you a clear quote.
What guarantee comes with gutter sealing in Bradley?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Where do you work from?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Do you install new fascias or gutters?
That is not something we do. Our work is sealing joints; replacing gutters and fascias needs a gutter or roofline installer.
Can landlords and businesses book you?
Yes. Domestic, commercial and hotel work are all part of what we do.