Hampshire · England
Bradley Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Bradley and across Hampshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- A messy, uneven bead from a previous reseal
- Failed sealant on the screen profile
- Splits where the tray meets the wall
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Bathroom resealing for homes and businesses in Bradley
We fill the bath before sealing it. A full bath sits slightly lower than an empty one, so the new joint isn’t pulled apart the first time it’s used. It’s a small step that rushed reseals tend to skip. We work on baths, kitchen worktops & upstands and wet rooms, and people most often call us about leaking joints on a shower screen and new sealant laid over old sealant that is now lifting.
Being in a small place like Bradley makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Every job comes with our 12-month guarantee, wherever you are in Hampshire.
- Place
- Bradley (SO24)
- Region
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Bradley
We work for landlords and letting agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Bathrooms and kitchens in Bradley
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
In and around Bradley, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Bradley is about 5 miles west of Alton, in Hampshire. Jobs in Bradley get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Bradley is one of 683 places in Hampshire where we work. You can also see our page for Reading, about 20 miles away.
Here we cover the SO24 postcode area for bathroom resealing. Other places close to Bradley include Burkham (1 mile north-east), Bentworth (2 miles south-east), Holt End (2 miles south-east), New Copse (2 miles south-east) and Bagmore (3 miles north-east). Further out, we also cover Basingstoke (7 miles north), Winchester (12 miles south-west), Fleet (13 miles north-east), Aldershot (15 miles east), Alton (5 miles east) and Petersfield (13 miles south-east).
Landmarks near Bradley
A little further out are Barton Castle (2.3 miles south-west) and Alton Community Hospital (4.8 miles south-east). The countryside around Bradley includes King's Hill.
Your questions about bathroom resealing in Bradley
What guarantee comes with bathroom resealing in Bradley?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you cover smaller places like Bradley?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Where do you work from?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Will there be a smell?
Some sealants have a smell while they cure. Ventilation helps.
Are you insured?
Yes. We are fully insured, and we can confirm the details when we quote.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
More services for Bradley
How the visit works
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. The job usually takes two to three hours for a typical bath, depending on how much old sealant there is. Somewhere as small as Bradley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Getting ready for the visit
- Tell us if parking is tricky
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
Getting a quote
To get a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Read more
Do you need bathroom resealing in Bradley?
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
Common reasons people contact us include:
- Smears of silicone across the tiles
- New sealant laid over old sealant that is now lifting
- Failed sealant on the screen profile
- Sealant that has split, shrunk or peeled away
Homes close to Church of All Saints include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What to look for in a quote
- Which sealant they’ll use, and why
- Are they insured?
- What the quote includes, VAT included or not
- Is the old sealant removed completely?
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Keep bottles off the sealant line
- Keep scourers and sharp tools away from the bead
- Dry the bead with a towel now and then
- Keep an eye on the corners, where splits start
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
There’s no need to wait for a full refurbishment. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Different surfaces, different methods
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, so it’s cut out and renewed just like a bath joint.
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Honest limits
To be straight with you, some problems need a different trade:
- A tray that rocks until it’s re-bedded
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Water getting in through the grout rather than the sealant
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Wet rooms
- Sinks & splashbacks
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Kitchen worktops & upstands