Hampshire · England
Bradley Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for Bradley, backed by a one-year guarantee. Ask us for a quote.
- Dark patches showing through the sealant
- Sealant peeling off a dusty or damp surface
- Products that weren’t meant for the joint
How we handle remedial sealant in Bradley
Remedial work is what we do when sealant has failed or been done badly. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all have to come out before the joint can be done properly. We work on leaking tray & enclosure joints, failed movement joints and mouldy bath & shower sealant, and common reasons people get in touch are black mould underneath the bead and products that weren’t meant for the joint.
Homes around Bradley are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Big or small, it’s backed by our one-year guarantee in Bradley and across Hampshire.
- Where
- Bradley (SO24)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
If you manage several properties in or around Bradley, several properties can go on one quote. Just tell us the addresses and what each one needs.
How to look after the new joints
A little care helps the new joints last. We recommend:
- Don’t add new sealant on top of old
- Keep the room well ventilated
- Keep bleach and abrasives off the bead
- Report a tray that rocks or a worktop that lifts
Where we have pointed out another fault, have it put right, because the new sealant can’t hold back a problem underneath.
If a joint has failed more than once, stop resealing it. Get the cause found first, or the next bead will go the same way.
How the visit works
All our tools and materials come with us in the van. Once we have agreed what’s being done, we protect the area and start. It normally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Bradley, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Before we arrive
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
- Plan for the work area to be out of bounds to pets and children
Get a quote
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Read more
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Common questions in Bradley
Can you do remedial sealant in Bradley?
Yes. Our work covers London and the South East, and Bradley is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Is there a guarantee on remedial sealant in Bradley?
All our work, in Bradley and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
What information do you need?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we are done.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. Most jobs take a few hours.
How do I get a quote for remedial sealant in Bradley?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Can you quote for more than one area?
Yes. Just list everything you need and you will get one quote.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages to suit the site.
What happens if it’s left?
Remedial work takes longer than a straight reseal, but rarely a lot: it takes a few hours for a typical bath or shower, longer where several layers have been applied. Compared with chasing the same leak every few months, it’s time well spent. Around Bradley, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
What you get with us
- We never seal over old sealant
- 180+ five-star Google reviews
- Fully insured
- We agree the colour with you first
Read our cost guide or customer reviews.
When it isn’t the sealant
It helps to know what we cannot do too:
- A cracked shower tray or bath (that needs repair or replacing)
- A tray or worktop that needs refixing first
- A leaking trap, valve or supply pipe
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Surfaces we seal
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
Other services in Bradley
Do you need remedial sealant in Bradley?
Movement tears sealant that isn’t designed for it. Flexing baths, rocking trays and building movement joints will split a rigid or thin bead.
Any of these means the joints need attention:
- Thick, messy sealant smeared over tiles
- Sealant peeling off a dusty or damp surface
- A shower that leaks however often it’s resealed
- Decorators’ caulk around a bath or shower
Around Bradley, as everywhere, remedial sealant is only as good as the preparation behind it.
Before booking anyone
- How hidden problems are handled
- Who turns up on the day
- What preparation is included
- Whether they seal over old material or remove it
Remedial sealant in Bradley: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first.
Bradley is about 5 miles west of Alton, in Hampshire. If you need remedial sealant in Bradley, please call 0345 464 0079 or drop us an email for a quick quote. We cover Hampshire from our Crawley base, Bradley included. Bradley is one of 683 towns and villages in Hampshire we cover for remedial sealant. Our Reading page covers work nearby, about 20 miles away.
All of SO24 is within our area for remedial sealant. Neighbouring places we cover for remedial sealant include Burkham (1 mile north-east), Bentworth (2 miles south-east), Holt End (2 miles south-east), New Copse (2 miles south-east) and Bagmore (3 miles north-east). Larger places within reach include Basingstoke (7 miles north), Winchester (12 miles south-west), Fleet (13 miles north-east), Aldershot (15 miles east), Alton (5 miles east) and Petersfield (13 miles south-east).
Around Bradley
Well-known places in the area include Barton Castle (2.3 miles south-west) and Alton Community Hospital (4.8 miles south-east). Not far away are King's Hill.