Hampshire · England
Bentworth Remedial Sealant
Problem with your failed sealant joints in Bentworth? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Mould trapped under a layer of silicone
- Sealant peeling off a dusty or damp surface
- Caulk or the wrong sealant used in a wet area
Remedial sealant in Bentworth, done properly
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. Typical jobs include sealant applied over old sealant that has lifted and wide, uneven beads that look worse than the old ones, on leaking tray & enclosure joints, failed movement joints and expansion joints.
Somewhere as small as Bentworth, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A one-year guarantee comes as standard, so you are covered after we have gone.
- Where
- Bentworth (GU34)
- Region
- Hampshire
- Guarantee
- One year on every job
- Price
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
A little care helps the new joints last. Our advice:
- Check ceilings under showers for marks
- Keep movement joints clear of mortar and paint
- Never seal over old silicone
- Act on a lifting corner right away
If the joint ever needs renewing, have it cut out, not sealed over. New silicone doesn’t bond to old, so the old bead should always come out first.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into floors, walls or ceilings. Early action keeps it to a sealant job.
Honest limits
We will not take on work that won’t last, so these are the limits:
- A leaking trap, valve or supply pipe
- Water damage behind tiles that needs a tiler
- Older mastics that may need an asbestos check before removal
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly.
Surfaces we seal
- Botched or over-sealed joints
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
Other services in Bentworth
Should I try it myself first?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
How we quote for remedial sealant
Jobs vary more than people expect. The main factors:
- Working hours on commercial sites
- The number and length of the joints
- Mould in or behind the old joints
- The old material and how stubborn it is
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Roughly how big the job is
- Whether it’s a home or a business
- Where the property is
- Access, such as stairs, a lift or height
Need a quote? Please call 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.
Common questions in Bentworth
Can you do remedial sealant in Bentworth?
Yes. Our work covers London and the South East, and Bentworth is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Do you cover smaller places like Bentworth?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or drop us an email.
My shower still leaks after a reseal. Can you sort it?
Yes. There’s normally a reason: sealant over sealant, movement or another leak, so we find that first.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
Different surfaces, different methods
Windows & doors
Some leaks around windows come from the wall or the window itself. We check the joint and tell you if it looks to be something else.
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing rod or bond-breaker tape prevents it, letting the sealant flex between the two faces.
Why it’s worth doing now in Bentworth
A failed seal rarely means a new bathroom. If the bath, tray and tiles are sound, remedial resealing usually puts it right. If they’re not, we will tell you. Older cottages and farmhouses around Bentworth can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- White, clear, grey or coloured to suit, where the product allows
- Any old sealant cut out fully, not covered over
- We leave the area clean and tidy
- Rated 4.9 stars on Google
Take a look at our cost guide and customer reviews.
Bathrooms and kitchens in Bentworth
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Alton station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. For site and facilities teams at buildings such as St Mary's Bentworth Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you live in an older home near St. Mary's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Bentworth is about 3 miles west of Alton, in Hampshire. Anywhere in GU34, we cover remedial sealant for homes and businesses. Our Hampshire coverage runs to 683 places, and Bentworth is one of them. There’s also a page for Reading, about 20 miles away.
Every address in GU34 is covered for remedial sealant. Whether your property is on Village Street, Church Street and Drury Lane or anywhere close by, our applicators can take on the job. We also cover the places around Bentworth: Holt End (1 mile south-west), Thedden (1 mile south-east), Wivelrod (1 mile south-east), New Copse (1 mile south-west) and Beech (2 miles south-east). Larger places within reach include Basingstoke (8 miles north), Winchester (13 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles north-east) and Alton (3 miles east).
Near you in Bentworth
Typical jobs here are in homes near The Star Inn, among other places. Bentworth’s nearest station is Alton station, about 3.5 miles east of the centre. Well-known places in the area include Barton Castle (3.2 miles south-west) and Gliding Heritage Centre (2.2 miles north-east). Open spaces near Bentworth include King's Hill.
How it works
At the end, we look at the finished work together. The visit itself normally takes a few hours, depending on how many layers have to come out, depending on the size of the job. Somewhere like Bentworth needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
How to prepare
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved and give you a clear quote.