Oxfordshire · England
Bix Regrouting
We cover Bix for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Shower grout that has worn away
- Kitchen splashback grout stained by grease
- Cracked or crumbling grout lines
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
Regrouting in Bix, done properly
A bathroom with good tiles can still look worn if the grout has gone. Regrouting replaces the grout and keeps the tiles you have, so nothing is ripped out. We work on tiled floors, shower walls and kitchen splashbacks, and people most often call us about floor grout that has worn and darkened and grout stained black or orange that won’t clean.
In a village or hamlet like Bix, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Whatever the size of the job, you get the same 12-month guarantee.
- Where
- Bix (RG9)
- Region
- Oxfordshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Nearby places to Bix
More services for Bix
Bix: your questions answered
Is Bix in your area for regrouting?
Yes, Bix is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Can you help a landlord with a rental near Henley-On-Thames station?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Can you change the grout colour?
It can. Because the old grout is raked out, the new colour goes all the way into the joint, not just the surface.
Where do you work from?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Can new sealant go over the old?
No. We remove every bit of old sealant first.
Is it possible to regrout only the shower area?
Yes, that’s common. The shower normally fails first, so many people regrout just that part.
How the job changes by surface
Corners and edges
Edges are resealed while we are there, so everything is renewed at once.
Bathroom floors
New floor grout makes a big difference to how a bathroom looks. Floor-to-wall and bath joints are sealed, not grouted.
What we can’t put right
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Tiles that have come away from the wall
- Movement in a stud wall or floor
- A leaking shower valve or waste
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before you book.
Surfaces we seal
- Wet rooms
- Bathroom floors
- Bathroom wall tiles
- Kitchen splashbacks
- Shower walls
- Tiled floors
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Clean grout with a mild bathroom cleaner
- Clean with a soft brush, not anything metal
- Keep harsh bleach and acid cleaners off the grout
- Keep the fan on after showering
If a tile starts to feel loose, get it looked at early. Movement will crack the new grout and open a path for water.
Cracked grout does not stay cracked for long. Water gets in behind and the tiles can start to loosen, so regrouting early can save a retile.
Regrouting in Bix: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St James, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Henley-On-Thames station, a regrout while the flat is empty is quicker than working around a tenant.
Bix is about 6 miles north of Caversham, in Oxfordshire. Whether you’re in the middle of Bix or further out, regrouting is available for homes and businesses alike. Across Oxfordshire, we cover 443 places, and Bix is one of them. There’s also a page for Reading, about 8 miles away.
We cover every part of the RG9 postcode area for regrouting. If you need regrouting at a property on White Lane and Rectory Lane or anywhere close by, our applicators can take on the job. We also cover Middle Assendon (1 mile north-east), Lower Assendon (1 mile south-east), Fawley Bottom (1 mile north-east), Catslip (2 miles north-west) and Shepherd's Green (2 miles south-west). We also work in nearby towns such as Didcot (13 miles west), Thame (13 miles north), Henley-on-Thames (3 miles south-east), Benson (8 miles north-west), Chinnor (10 miles north) and Tilehurst (8 miles south-west).
Landmarks near Bix
Typical jobs here are in homes near The Fox Public House. Bix’s nearest station is Henley-On-Thames station, roughly 2.9 miles south-east. Other landmarks nearby include Frazer Nash Archives (3.2 miles south-east). Not far away are Warburg Nature Reserve.
What affects the quote in Bix
You will get a clear quote before any work starts. It’s based on:
- The size of the job
- Mould in or behind the old joints
- The old material and how stubborn it is
- The product the joint needs
Combining jobs into one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
What we need to know
Photos help, but a description is a good start. Please mention:
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
- The address or postcode of the job
- Any access issues, like height or stairs
Need a quote? Please phone 0345 464 0079 or email us with a few details. We’ll explain what we’d do and give you a clear price before work begins.
How it works
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. We protect the surfaces around the joints before we start. Most jobs take anything from a few hours to a full day, depending on the area. For a village or hamlet like Bix, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Mention any sign-in or site rules at work premises
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We will give you a clear price before any work starts.
Advice
Landlords, agents and businesses in Bix
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured for the work.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.