Essex · England
Mastic man in CM1
Bathroom resealing, window mastic and commercial sealant work across CM1, from Chelmsford, Springfield and Writtle. Clear quotes before we start and a one-year guarantee.
Where we work in CM1
- Chelmsford
- Springfield
- Writtle
- Patching
- Broomfield
- Roxwell
- Edney Common
- Good Easter
- Loves Green
- High Easter
- Mashbury
- Newney Green
- Chalk End
- Chignall Smealy
- Chignall St James
- Stagden Cross
- Boyton Cross
- Moulsham
- Widford
Services in CM1
- Floor & skirting joints
- External & façade joints
- Window & door mastic
- Regrouting
- Bathroom & kitchen resealing
- Fire-rated sealant
- Commercial & hotel sealant
- Glazing & conservatory sealant
- New-build mastic & snagging
- Sand mastic for sash & case windows
- Remedial sealant & repairs
- Gutter, fascia & soffit sealing
- All services
Tell us what needs doing and your postcode and we’ll give you a clear price: phone 0345 464 0079 or drop us an email.
Districts next door
Elsewhere in Essex
Every town in Essex
Every area we cover
How bathroom resealing works in CM1
A bead that has gone black, split or come away is worth sorting before it lets water through. Just ring 0345 464 0079 or send us an email with a photo of the joints, and we’ll give you a clear price for bathroom resealing in CM1. We work on basins & vanity units, kitchen worktops & upstands and wet rooms, and common reasons people get in touch are shrunken sealant along the back of a worktop and a bead that has pulled away from the tiles.
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and tidy away. It normally takes two to three hours for a typical bath, depending on how much old sealant there is.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Pricing in CM1
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- ARBOMaster approved applicator
- White, clear, grey or another colour, product permitting
- Quality sealants from Arbo and Everbuild
- We agree the colour with you first
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job, and pictures are welcome.
Near you in Chelmsford
Locally, jobs take us to homes and businesses close to Chelmer Valley Riverside, Chelmsford College and Trinity Road Primary School. Also close by are The Two Brewers Public House (less than half a mile south-west), Church of the Holy Trinity (under half a mile south-west), The Boswells School (0.8 miles north) and Our Lady Immaculate Church (1 mile south-west). The closest station to Chelmsford is Chelmsford station, roughly 0.7 miles west of the centre. Well-known places in the area include Priory Hospital (under half a mile north) and Peter Edwards Museum And Library (0.8 miles south-west). For a walk, there’s Newland Grove.
Where we work in CM1
Our bathroom resealing work across CM1 covers homes, rentals and businesses, from Chelmsford, Moulsham and Springfield to the quieter places in between. Wherever the job is, all the old material comes out before anything new goes in.
From Victorian terraces to post-war new towns and modern estates, homes across the South East and London cover every era. The right sealant depends on the age and materials of the building, wherever it is in CM1.
Chelmsford: If you look after a building such as Trinity Road Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Chelmsford station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
How the job changes by surface
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. Movement is checked before anything is resealed, and if the tray needs refixing, we’ll say so.
Wet rooms
Wet room floors move slightly as they’re used, so the internal corners need silicone rather than grout. Cracked grout in a corner can be cut out and replaced with silicone.
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What affects the cost of bathroom resealing
We do not publish a price list, because jobs vary so much. The quote depends on:
- The product the joint needs
- Whether the work is at height
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
What it costs depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- Pictures of the joints, sent by email
- What’s wrong with the joints now
- Access, such as stairs, a lift or height
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or drop us an email.
Looking after it afterwards
To keep the joints looking good and working properly:
- Stick to a soft cloth and a mild cleaner
- Wipe up water along the back of the worktop
- Keep scourers and sharp tools away from the bead
- Move toiletries away from the joint
Keep water off the new bead until it has cured, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. If you spot one, it’s time to reseal.
Landlords, agents and businesses in CM1
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Landlords and agents in CM1 can book us as well as householders. Resealing between tenancies keeps a property looking cared for.
FAQs for CM1
Are you insured?
Yes. We’re fully insured.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or send us an email.
Do you come to CM1?
Yes. We cover CM1 and the rest of Essex. For a quote, ring 0345 464 0079 or drop us an email.
How long does a bath or shower reseal take?
Allow a couple of hours for a single bath or shower. We will confirm how long your job needs when we quote.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access.
How do I get a quote for bathroom resealing in CM1?
It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or email us and tell us what needs doing and where.