Essex · England

Bathroom & kitchen resealing in High Easter, Essex

Bathroom resealing for High Easter, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Lumpy, uneven sealant from a DIY attempt
  • Failed sealant on the screen profile
  • Gaps between the worktop and the wall

Bathroom resealing near High Easter

Bathroom resealing for homes and businesses in High Easter

A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. We work on shower trays & enclosures, kitchen worktops & upstands and basins & vanity units, and people most often call us about black mould in the silicone that won’t clean off and gaps where the bath or tray has moved.

Somewhere as small as High Easter, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.

We stand behind the work with a 12-month guarantee.

Sealant gun close-up on a shower enclosure wall joint
Place
High Easter (CM1)
Wider area
Essex
Cover
A year, on every job
Quotes
Quoted before any work starts
Phone
0345 464 0079
Page updated
26 October 2026

What the job involves on each surface

Shower trays & enclosures

Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both take water every day, so both are resealed with anti-fungal sanitary silicone.

Wet rooms

Wet room floors move slightly as they’re used, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.

What happens on the day

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen and we leave things clean and tidy. For a village or hamlet like High Easter, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. Protection goes down around the bath, shower or worktop.
  2. Old sealant is sliced away and the residue removed.
  3. Mould is treated, then the joint is left to dry thoroughly.
  4. Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
  5. The joint is finished neatly and we explain when it can get wet.

How to prepare

  • Tell us if parking is tricky
  • Mention if the joints have been sealed before
  • For business premises, tell us about site rules or sign-in

Getting a quote

Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will explain what’s involved and send you a clear quote.

Get a price

Related advice

How we quote for bathroom resealing

We quote each job individually. This is what makes a difference:

  • Whether the work is at height
  • How much old sealant there is and how hard it is to remove
  • Working hours on commercial sites
  • Which sealant suits the joint

What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.

Helping us quote

What to tell us when you ask for a quote:

  • Any previous sealing or DIY work
  • The rough size of the job
  • Where the property is
  • Photos by email, if that is easy

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand.

Can I do it myself?

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

High Easter homes and their sealant

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

If you live in an older home near Parish Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.

High Easter is about 7 miles north-west of Chelmsford, in Essex. Jobs in High Easter get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 644 towns and villages across Essex, large and small. There’s also a page for Chelmsford, about 7 miles away.

Every address in CM1 is within our area for bathroom resealing, from the main roads to the quietest streets. That includes homes and businesses on The Street and Boreham Court. If you’re just outside High Easter, we cover Stagden Cross (1 mile east), High Roding (2 miles north-west), Keeres Green (2 miles west), Roundbush Green (2 miles west) and Great Canfield (2 miles north-west). Further out, we also cover Chelmsford (7 miles south-east), Braintree (10 miles north-east), Harlow (11 miles west), Brentwood (13 miles south), Maldon (15 miles east) and Billericay (13 miles south).

Local landmarks in High Easter

Typical jobs here are in homes near Cock And Bell pub and the streets around them. Other landmarks nearby include Willingale Doe (4.5 miles south-west) and Broomfield Hospital (5.1 miles south-east).

Map of High Easter © OpenStreetMap contributors

High Easter questions

Is bathroom resealing in High Easter guaranteed?

All our work, in High Easter and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.

Can you do bathroom resealing in High Easter?

Yes, High Easter is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.

Do you do kitchens as well as bathrooms?

Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.

Can landlords and businesses book you?

Yes. We work in homes, commercial premises and hotels, and we’re fully insured.

Do you hold any approvals?

Yes. We’re approved under the ARBOMaster scheme.

Is it messy?

Not at all. We work neatly, protect the area around the joints and tidy up afterwards.

How long does it take to reseal a bath or shower?

It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.

My sealant has gone black. Can you sort it?

Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.

Landlords, agents and businesses in High Easter

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.

How to look after the new joints

Good habits help new joints last longer. Our tips:

  • Don’t leave water standing on kitchen joints
  • Avoid abrasive pads on the sealant
  • Dry the bead with a towel now and then
  • Wait for the cure time we give you

Check the sealant now and then. A small split or a corner lifting is easy to spot, so if something does not look right, just call 0345 464 0079 or send us an email.

There’s no need to wait for a full refurbishment. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.

What we are called out for in High Easter

Mould is the reason many people want their sealant replaced. Steamy rooms that don’t dry out keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.

Keep an eye out for any of the following:

  • New sealant laid over old sealant that is now lifting
  • Splits where the tray meets the wall
  • Damp behind the bath or under the tray
  • A messy, uneven bead from a previous reseal

In and around High Easter, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.

What to look for in a quote

  • Whether they seal over old material or remove it
  • How long the guarantee is
  • What happens if the job turns out different
  • How the joint is cleaned and prepared

10 questions to ask before booking

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job